Question about 2000 Toyota 4Runner

Open Question

2000 toyota 4runner rear window rolled down but won't roll up

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: my rear window wont go up or down 1990 toyota 4runner

I am assuming you have power windows, more than likely your power window motor regulator needs to be replaced. But first your window could have came off its track, to check to see if this is the case (the easy way):
1. inspect the window make sure it doesn't appear to be visibly crooked or cockeyed
2. hit both the front and back of window with the palm of your hand forcefully, but not hard enough to hurt yourself of course :)
3. check to see if window will go up and down now
4. if this doesn't fix it then it's time to replace the power window motor regulator, unfortunately this isn't a job for the average joe (especially if he doesn't have the appropriate tools) so you'd need to take it to a shop

Posted on Jan 30, 2009

  • 125 Answers

SOURCE: Not working = power rear window, power antenna, starter

it looks like the starter is bad, install a new one. the antenna gear is broken, needs to be replaced and you need to check the rear hatch for any obstructions

Posted on Apr 30, 2009

  • 1 Answer

SOURCE: rear window will not roll down

I had the same problem but it turned out to be the safety switch that is in the drivers side gate latch. To get to it you must roll down the window. I did this by disconnecting the motor and attaching a cordless drill battery to the ternminals at the harness. One way rolls up and switch the connection to roll down. Take off the drivers side latch (three screws on gate edge) and there is a switch inside the latch. My local toyota dealer didnt have the swicth so I just took it out of the loop. This solved my problem, but there is about 4 switches/relays in the gate alone that can give you the same problem.

Posted on May 07, 2009

  • 77 Answers

SOURCE: Divers window won't roll up my Camry

No won't be fuse. My guess is there is something faulty with the main controller. You could probably verify this by trying the switch on right rear passenger door. If it works there then the problem is at the main controller in the driver door. Could be a loose wire or the switch itself is broken.

Posted on May 13, 2009

MauiRentaCar
  • 288 Answers

SOURCE: 2000 Toyota Camry Window Problem

Sorry to strike your hopes on this one, but it is not a fuse problem. If there was a blown fuse, the window motor would not get any voltage at all and would neither roll up nor down.

Now, the good news is that you can order an after-market window motor and regulator for a very reasonable price, for example just $44.95 delivered from www.AM-autoparts.com for your 2000 Camry. If you are just moderately handy, you can remove the interior door panel and replace the part yourself. Or, you can take it to an auto glass shop and they will replace it for you. The charge should be about one hour's labor.

Posted on Mar 21, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the fuse for the rear window of a 1986 4runner


rear window issue not rolling down?, take your rear window wiper blade and push up to the docking position. Then try the window. The wiper is electrically inline with the window relay. If it is not all the way up (sagging) then your window will not roll down. Hope this helps. Also, the relay board that operate rear window defog, and up/down is located drivers side behind the front seat behind the plastic trim. Next to the fuse box there are two circute breakers,in the center of the two breakers is a small hole take a tooth pick and push into the hole to reset the breaker,if I beleive the rear window breaker is nearest to the fuse box?? this should do the trick.

Sep 13, 2012 | 1986 Toyota 4Runner

1 Answer

How do I replace back door lock cyl. on 92 4runner?


not really. it is best done with two people. remove the inside paneling, roll the window down and open the tailgate. then use a phillips screwdriver and push down the side tabs so the tailgate thinks it closed and roll the window up, have the second person hold the glass. You now have access to change the key cylinder.

Feb 05, 2012 | 1992 Toyota 4Runner

1 Answer

Only one side of my rear window on my 1995 4Runner will start to roll down when the switch is actuated. Upon taking the panel off, the arms are working but one side isn't coming down with the arm. How


COULD BE THE MOST COMMON TYPE THE GLASS IS CLAMPED IN A RUBBER SHROUD WITH A METAL SLOT AND THIS HAS CORRODED AWAY ESPECIALLY ON A VEHICLE IN NORTHERN CLIMES

Nov 29, 2011 | 1995 Toyota 4Runner

1 Answer

2000 toyota 4runner rear brake locked up, will go back, then neutral will roll little bit, then stuck, now in driveway, can not go anyway, please help!


You need to remove the rear wheels and the rotor/drums. You will find your problem in the parking brake shoes. You will need to replace these.

Sep 04, 2010 | 2000 Toyota 4Runner

1 Answer

I came out of work yesterday and noticed the rear window rolled all the way down and I know I hadn't done it and then again the same issue. it rolls up fine and does not seem to roll down when jostled...


I had similar problem it was the key switch in the rear tailgate. You need to remove the upholstered panel and then the steel panel and with the window all the way up you can unplug the key switch harness connector to remove it from the circuit. I left mine unplugged and now works fine with just the front panel switch.

Hope this helps

Rick

Mar 24, 2010 | 1998 Toyota 4Runner

1 Answer

1995 Toyota 4 Runner rear window will not open, on


check to make sure that the wiper is not stuck in the window seal. Pull it out if it is and then try. The window will not roll down if the wiper is in that position.

Nov 19, 2009 | 1995 Toyota 4Runner

1 Answer

I HAVE A 1992 4RUNNER, MY BACK WINDOW ONLY GOES DOWN FROM THE INSIDE. IS THERE A PLACE ON THE OUTSIDE TO OPEN????


You should be able to put your key in the rear door and turn in either direction to roll the back window up and down.

Sep 21, 2009 | 1992 Toyota 4Runner

1 Answer

Rear window will not roll down


I had the same problem but it turned out to be the safety switch that is in the drivers side gate latch. To get to it you must roll down the window. I did this by disconnecting the motor and attaching a cordless drill battery to the ternminals at the harness. One way rolls up and switch the connection to roll down. Take off the drivers side latch (three screws on gate edge) and there is a switch inside the latch. My local toyota dealer didnt have the swicth so I just took it out of the loop. This solved my problem, but there is about 4 switches/relays in the gate alone that can give you the same problem.

Dec 30, 2008 | 1985 Toyota 4Runner

Not finding what you are looking for?
2000 Toyota 4Runner Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...