Question about 1999 Ford Falcon

Open Question

Remove Rear Seat

Remove backseat

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: how to remove backseat backrest to change seat cover from 05 f150

u have to start by taking the bottoms out. then the back there should be two bolt to take out and it slides up and pulls off

Posted on Jun 29, 2009

emissionwiz
  • 75005 Answers

SOURCE: how do you remove 89 convertible mustang rear seat

hit it hard (with the side of your hand or palm) at the bottom of the seat on the right and the left to relase the spring retainers, run a putty kniofe under the seat edge to locate the spring retainers

Posted on Apr 03, 2010

ZJLimited
  • 17970 Answers

SOURCE: how do i remove the backseat in my thunderbird?

Rear Bench
(see Figure 4)

  1. Bearing down with your knee on the rear seat cushion, push the cushion rearward and disengage it from the retaining brackets.
  2. Remove the rear seat armrests if applicable.
a32ebe2.jpg

Fig. 4: Pull the bottom of the seat upwards and pull out
  1. Remove the seatback lower retaining screws and seat belt bolts.
  2. Grasp the seatback at the bottom and lift it up to disengage the hanger wire from the retainer brackets.

To install:
  1. Position the seat back assembly so that the hanger wire is fully engaged in the package tray slots.
  2. Install the lower retaining screws and tighten to 13-19 ft. lbs. (17-37 Nm).
  3. Position the seat cushion assembly into the vehicle.
  4. Apply knee pressure to the lower portion of the seat cushion assembly. Push rearwards and down to lock the seat cushion into the seat retainer.
  5. Check the seat cushion to ensure it is secured into the floor retainer.

Rear, Fold-Down Seats
  1. Push the rear cushion rearwards, then lift to release. Remove the cushion.
  2. Remove the 2 lower retaining screws attaching the seat back to the floor.
  3. Lift up and disengage the upper clips of the seatback from the top of the folding floor.
  4. Remove the seat assembly.

To install:
  1. Position the seat back assembly and align the retaining hooks. Ensure hooks fully engage in slots.
  2. Install the two outboard retaining bolts, then tighten to 13-19 ft. lbs. (17-27 Nm).
  3. Lower the seat backs and install the upper retaining screws.
  4. Install the lower center retaining screw, tighten to 13-19 ft. lbs. (17-27 Nm).
  5. Install the rear seat cushion. Ensure the rear seat cushion front retainers latch properly.

Hope helps (remember rated this).

Posted on Jul 01, 2010

  • 29 Answers

SOURCE: how to remove rear seat for a 2004 ford f150

push down on top of seat then pull out its on hooks that point down

Posted on Oct 08, 2012

  • 84 Answers

SOURCE: how do i remove the rear seat

You might be able to get some on ideas on how to do it here:

http://www.ford-trucks.com/forums/1016479-how-to-remove-rear-seats-fix-seat-belt.html

Posted on Dec 10, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove backseat


On most GMs, you remove the rear seat by:
1. Stand in the back floor facing front.
2. Pull up slightly on the bottom edge of the seat until it stops.
3. With your heel, kick the bottom edge of the seat backwards in the center of each side of the drive shaft channel to release the clip.
4. Alternative: if the seat isn't just clipped in, there are two 10 mm. bolts under the bottom seat lip.
Once you have the seat bottom out, there will usually be two more 10 mm bolts holdng the seat back in place. After removing the bolts, push straight up on the seat back to disengage the clips.

May 22, 2015 | 1988 Cadillac Brougham

1 Answer

How do you remove the back seat in a 2005 Toyota Avalon?


Most back seats come out the same way. The seat (bottom part) is usually bolted down with two bolts that can be accessed by lifting the rear carpet away from the seat sill, near the floor. Once these bolts have been removed, the seat can be lifted up and out. This should now reveal the two bolts that hold the backrest to the body. Undo them and the backrest can be pushed up and out.

Sep 30, 2014 | 2005 Toyota Avalon

1 Answer

How to remove the backseat of 1994 buick avenue


most gm vehicles have a two piece back seat; you have to remove the bottom first. there are two screws on a little vertical section of floorboard under the front of the seat; remove them, then push the seat back just a little and remove the lower section. then you will see two more screws which hold the backrest; when you remove them just lift up and remove the backrest. you can reinstall the lower section if you want.

Mar 05, 2013 | 1994 Buick Park Avenue

1 Answer

How do i remove the backseat in my thunderbird?


Rear Bench
(see Figure 4)
  1. Bearing down with your knee on the rear seat cushion, push the cushion rearward and disengage it from the retaining brackets.
  2. Remove the rear seat armrests if applicable.
a32ebe2.jpg

Fig. 4: Pull the bottom of the seat upwards and pull out
  1. Remove the seatback lower retaining screws and seat belt bolts.
  2. Grasp the seatback at the bottom and lift it up to disengage the hanger wire from the retainer brackets.

To install:
  1. Position the seat back assembly so that the hanger wire is fully engaged in the package tray slots.
  2. Install the lower retaining screws and tighten to 13-19 ft. lbs. (17-37 Nm).
  3. Position the seat cushion assembly into the vehicle.
  4. Apply knee pressure to the lower portion of the seat cushion assembly. Push rearwards and down to lock the seat cushion into the seat retainer.
  5. Check the seat cushion to ensure it is secured into the floor retainer.

Rear, Fold-Down Seats
  1. Push the rear cushion rearwards, then lift to release. Remove the cushion.
  2. Remove the 2 lower retaining screws attaching the seat back to the floor.
  3. Lift up and disengage the upper clips of the seatback from the top of the folding floor.
  4. Remove the seat assembly.

To install:
  1. Position the seat back assembly and align the retaining hooks. Ensure hooks fully engage in slots.
  2. Install the two outboard retaining bolts, then tighten to 13-19 ft. lbs. (17-27 Nm).
  3. Lower the seat backs and install the upper retaining screws.
  4. Install the lower center retaining screw, tighten to 13-19 ft. lbs. (17-27 Nm).
  5. Install the rear seat cushion. Ensure the rear seat cushion front retainers latch properly.

Hope helps (remember rated this).

Jul 01, 2010 | 1994 Ford Thunderbird

1 Answer

Remove backseat of honda accord 1991


With your hands, press down on the seat cushion where it meets the seat back. Locate the retaining bolt(s). Some models retain the seat with one bolt in the center; others use two, evenly spaced left and right.
Remove the retaining bolt(s).
Life the back (toward the rear of the car) of the seat bottom upwards while rotating it toward the front of the car.
Disconnect the hooks at the front edge (during the rolling motion) of the seat and remove the seat bottom.
Remove the carpet (in the luggage compartment) from the rear of the seat backs.
Remove the seat back mounting bolts from the luggage compartment side.
Lift out the seat back.
If the rear side bolsters or pads are to be removed, remove the lower mounting bolt, then push upward to free the hooks.
Hope this helps you.

Oct 17, 2009 | 1991 Honda Accord

1 Answer

How to take out the back seat backrest


Push down on the rear of the seats part of the backseat and it should release and pop loose. Remove it.

Then there are two bolts at the bottom of the seat back, remove these and it should come out easily

Sep 10, 2009 | 1996 Ford Crown Victoria

1 Answer

Looking for lost necklace in rear seat of 2010 Camry


to take off the the bottom part of the seat all you have to do is pull the front seats up all the way get in the back seat push the front of the back seat back and pull up

Jul 08, 2009 | 2008 Toyota Camry

1 Answer

How to remove backseat backrest to change seat cover from 05 f150


u have to start by taking the bottoms out. then the back there should be two bolt to take out and it slides up and pulls off

Jun 15, 2009 | 2005 Ford F-150

1 Answer

Removal of backseat


Hi

If you want to remove the rear seat, 2 screws secure the lower seat squab, then once out, you can see the 2 screws that secure the backrest, once undone, lift to remove.

Are you sure you can´t get to the speaker, from in the trunk ?

Might be a wire adrift ?

Good Luck !

John.


Feb 11, 2009 | 1992 Jaguar XJ6

1 Answer

Installing rear speakers for 300m chrysler


You have to remove the backseat, the back upper sidepillar trim and then the cover over the speakers.

Aug 01, 2008 | 1999 Chrysler 300M

Not finding what you are looking for?
1999 Ford Falcon Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...