2011 Jeep Grand Cherokee Logo

Related Topics:

A
Anonymous Posted on Nov 19, 2013

2011 and 2012 jeep grand cherokee heat blend door actuator

5 Related Answers

Anonymous

  • 3 Answers
  • Posted on Dec 29, 2008

SOURCE: How to change heater blend doors on 2003 Jeep Grand Cherokee

go to wjjeeps.com there is several pictures and step by step instructions.

Ad
matney68

Donnie Matney

  • 426 Answers
  • Posted on Nov 05, 2009

SOURCE: I have a 1993 Jeep Cherokee Larado. I just paid

if it got stuck when they took it apart.yes. It may also be coincedence.the heat worked before they did the evap I beleive I would be more than a little angry.it should of been noticed when they had it apart. Sorry but this is not something I can be for sure about but I would question the whole deal, the original price is right, if they were at fault when the box was out this should be a free labor
repair in my book.

Anonymous

  • 1985 Answers
  • Posted on Dec 04, 2009

SOURCE: 2002 jeep cherokee will not heat repair man wants

most of that is labor,
did he tell you he has to drop the steering column,
And remove the entire dash assembly out of the car just to get to the blend air actuator.

Anonymous

  • 1985 Answers
  • Posted on Dec 25, 2009

SOURCE: 2004 Jeep Grand Cherokee blend door replacement

its not the door its self that doesn't work,it is opened by a vacume valve and closed with a vacume valve,and it is not an easy job even for a mechanic

Anonymous

  • 1 Answer
  • Posted on Jan 13, 2010

SOURCE: heat is out on 1999 jeep grand cherokee limited

I had this problem on a 99 grand cherokee limited, It was the heater blend doors and if you have dual climate control one side usually goes out before the other. These blend doors are located behind the glove box unaccessible inside the HVAC shell.
(http://www.wjjeeps.com/hvac_sub_assembly.htm) Motor failures for this HVAC sub assemblies is also something to look for although much less common.
My local dealership estimated $$$$$$$$$950.00 because they have to remove the entire dash so I looked around for something else.
http://cgi.ebay.com/ebaymotors/Blen-Dor-Jeep-Grand-Cherokee-Blend-Door-Heater-Repair_W0QQcmdZViewItemQQhashZitem3eef1e1cd6QQitemZ270299700438QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

I used something similar to this and now have heat that is controlled solely by the knob nearest the driver. It wasn't very difficult just kind of a tight squeeze.
Hope this helps
GOOD LUCK

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Heat wont heat up, just replaced thermostat.

There are several possible reasons why you may be experiencing cool or no heat in your 2002 Jeep Grand Cherokee Laredo after replacing the thermostat and bleeding the air out of the lines. Some possible causes could include:
  1. A malfunctioning blend door or actuator: The blend door controls the mix of hot and cold air that is directed through the heating system. If the blend door or actuator is not functioning properly, it may cause a lack of heat.
  2. A clogged heater core: The heater core is responsible for transferring heat from the engine to the cabin of the vehicle. If the heater core is clogged, it may not be able to transfer heat effectively, resulting in cool or no heat.
  3. A faulty thermostat: If the thermostat was not properly installed or is not functioning correctly, it may cause the heating system to not work properly.
  4. A problem with the water pump: The water pump is responsible for circulating coolant through the engine and heating system. If the water pump is not functioning properly, it may cause a lack of heat.
1helpful
1answer

2007 Jeep Grand Cherokee heater/ AC control.

Blend Door Actuators not working properly. The doors open and close to blend hot or cold air.

https://www.google.com/search?q=2007+jeep+grand+cherokee+blend+door+actuator+location

..
0helpful
1answer

Where do i find the blend air door actuator on a 1996 Jeep grand cherokee?

ever heard of the FSM book, or the free one.
posted here 100s of times.
and is fully covered in the chapter called. HVAC
here we go , again. chapter 24, open and read....

http://www.jeep4x4center.com/knowledge-base/index.htm?utm_source=cj#service

then ask questions, im sure there will be.....................
2helpful
1answer

Afternnon, just wondering about the best way to locate the blend doors in the hvac box without ripping out the dash on my 2000 jeep grand cherokee. Thanks in advance. Duane

y9ou can gain access to the driver side blend door actuator by removing the glove box. The actuator will be in the left corner of the glove box opening. If you remove the actuator you will be able to turn the pin. If you can turn it 360 degrees the blend door is broke.

If your lucky its only the drivers side. If you get the repair kit from chrysler it will come with instructions with pictures on how to replace the blend door without pulling the HVAC unit/Dash. If the passenger side is broken the HVAC unit will need to be removed.

Heater treater (google them) also have a metal blend door replacement and instructions online on how to replace them without pulling the HVAC housing.

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

1helpful
1answer

Heat is out on 1999 jeep grand cherokee limited

I had this problem on a 99 grand cherokee limited, It was the heater blend doors and if you have dual climate control one side usually goes out before the other. These blend doors are located behind the glove box unaccessible inside the HVAC shell.
(http://www.wjjeeps.com/hvac_sub_assembly.htm) Motor failures for this HVAC sub assemblies is also something to look for although much less common.
My local dealership estimated $$$$$$$$$950.00 because they have to remove the entire dash so I looked around for something else.
http://cgi.ebay.com/ebaymotors/Blen-Dor-Jeep-Grand-Cherokee-Blend-Door-Heater-Repair_W0QQcmdZViewItemQQhashZitem3eef1e1cd6QQitemZ270299700438QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

I used something similar to this and now have heat that is controlled solely by the knob nearest the driver. It wasn't very difficult just kind of a tight squeeze.
Hope this helps
GOOD LUCK
1helpful
1answer

Were is the blend door located on the 2004 jeep grand cherokee overland

blend doors are located in the heater box behind the dashboard.. if you are having heating problems because of faulty blend doors, try heatertreater.com they have a permently quick fix solution that really does work. i have fitted quite a few with no problems, even better heat than standard jeep blend doors..
hope this helps
2helpful
1answer

2002 jeep cherokee will not heat repair man wants $375 for parts and labor says it is the blend door actuator

most of that is labor,
did he tell you he has to drop the steering column,
And remove the entire dash assembly out of the car just to get to the blend air actuator.
Not finding what you are looking for?

769 views

Ask a Question

Usually answered in minutes!

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...