Question about Holden Ute

Open Question

How to replace 1989 holden rodeo internal rear view mirror

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 51 Answers

SOURCE: Replace side view mirror on Dodge Caravan

You will need to remove the triangular panel on the inside of the door on the opposite side of the broken mirror. Once you remove the panel, you will see the retaining bolts holding the mirror in place. Once you remove the bolts, the mirror can then be pulled out from the outside. Reverse the procedure to reinstall the new mirror.

Posted on Aug 09, 2008

Ad

SOURCE: rear view mirror

I think that it has to be given a quarter turn, sort of like changing the bulbs in a headlight assembly

Posted on Oct 17, 2008

emissionwiz
  • 77169 Answers

SOURCE: How do you remove interior rear view mirror on 1998 Buick Regal

It is held on by a spring tension clip, use a jewlers screwdriver to release it.

Posted on Nov 14, 2008

  • 1986 Answers

SOURCE: passengers side rear view mirro replacement

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Posted on Sep 29, 2009

  • 1986 Answers

SOURCE: replace left side rear view mirror/2005 buick century

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Posted on Sep 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi I have a holden rodeo 2007 and the side electric mirrors dont work I have checked the cabin fuses but there isint one for the mirrors in there .where would the be located. Please .


There isn't one. Mirrors are controlled by the bcm. Most times it is the switch for the mirrors. Other times is because a wire broke. Most times the wire broke is in the boot between the drivers door and the body.

May 14, 2016 | Holden Cars & Trucks

1 Answer

I have a 2005 holden rodeo LT. My left hand side mirror is broken and just wondering the easiest way to replace it?


G'Day, and greetings from Canada via the old home country GB!

I reckon when you get the new one, you will see how itr fits. Looking at the pictures, it looks like they have short screws on them, so on the inside of that triangular fillet, you are going to see screw covers or a removable panel.

You can get just the glass for $20 AUS, but getting the new one in without breaking is difficult.


RA Rodeo Mirror eBay

Jan 17, 2016 | Holden Cars & Trucks

1 Answer

Rodeo petrol starts but wont rev


Holden Rodeo 1989 2.6mpi , start and only runs for 2 or so seconds themselves stalls, after putting on a fuel peesure gauge, fuel looked okay and slowly dropping, found the ECM relay was intermittently switching on and off, gave it a tap and the engine kept on running, relay not repairable, replace with new part. Located in the fuse and relay box on the right hand side of engine bay next to battery. Hope this helps.

May 24, 2012 | Holden Rodeo Cars & Trucks

1 Answer

My internal rear view mirror is broken, how do I replace it for a ford falcon futura 2001 model. I already bought a second hand mirror I just don't know how to replace the old one.


Most mirrors have a Allan key screw in the find a Allan key to fit and take the mirror off by lifting upwards and replace in the opposite manner.

Feb 12, 2011 | Ford Futura Cars & Trucks

1 Answer

Replace passenger mirror


glass and motor availbable separately

Removal
NOTE: Do not remove the mirror assembly when repairing the individual mirror part. Individual mirror parts can be installed without removing the mirror assembly.
  1. Remove the front door trim panel; refer to Section 501-05.
  1. Remove the outside rear view mirror access water shield.
    gn1881a.gif
  1. Remove the speaker.
    1. Remove the screws.
    1. Disconnect and remove the speaker.
    gn1882a.gif
  1. Disconnect the outside rear view mirror electrical connector.
    gn1883a.gif
  1. Remove the outside rear view mirror.
    1. Remove the nuts.
    1. Remove the outside rear view mirror.
      • Feed the outside rear view mirror wiring through the opening in the front door.
    gn1884a.gif

Oct 26, 2010 | 2003 Ford Ranger Regular Cab

1 Answer

I need instructions for replacing a passenger side view mirror on a 1997 Isuzu Rodeo


Side Mirrors - Power Mirror
Removal & Installation
  1. Disconnect the negative battery cable.
  2. Remove the door mirror cover (3).
  3. Remove the three bolts and disconnect the connector (2), then remove the mirror assembly (1).
  4. Installation is the reverse of the removal procedure.

    0047d6d.jpg
    Fig. View of the power mirror (1), connector (2) and cover (3)

Hope this helps.

Sep 07, 2010 | 1997 Isuzu Rodeo

1 Answer

Need a diagram for installing a drivers side electric power mirror on a 1995 mercury villager van


here's 1996, all I have. Please rate.

Mirror, Power — Outside Rear View NOTE: This procedure applies to both RH and LH power outside rear view mirrors.

Removal
  1. Remove the front door trim panel (23942). Refer to Section 01-05 for the removal procedure.
  1. Remove the two outside rear view mirror inside mounting hole cover screws and the outside rear view mirror mounting hole cover (17K709) from the front door (20124).




  1. Remove the wire clip.
  1. Disconnect the power outside rear view mirror electrical connector.




  1. Remove the three power outside rear view mirror bolts and the power outside rear view mirror.




Installation
To install, reverse the removal procedure. Tighten the three power outside rear view mirror bolts to 3-4 Nm (27-35 lb-in). Glass, Outside Mirror
Removal and Installation
Refer to the glass replacement procedures in Manual Mirror for power outside rear view mirror glass (17K707) Trim Cover
Removal
  1. Remove the front door trim panel. Refer to Section 01-05 for the removal procedure.
  1. Remove the two outside rear view mirror inside mounting hole cover screws.


    Remove the outside rear view mirror mounting hole cover.
Installation
To install, reverse the removal procedure. Mirror Control
Removal
  1. Use a small flat-blade screwdriver to pry the power outside rear view mirror control switch from the instrument panel (04320).


May 13, 2010 | 1995 Mercury Villager

1 Answer

How do i turn in my rear view mirrors


On drivers side internal door handle there's a small, joystick and an up-or-down switch. the former moves the mirror while the switch selects which mirror. good luck !

Oct 28, 2008 | 2001 BMW 3 Series

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Holden Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14384 Answers

Are you a Holden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...