Question about 2004 Nissan Quest
The drive section in the regulator is either broken or stripped . You will have to remove it for repair or replacement
Posted on Nov 20, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The reason that they go down but not up is because they are usually binding in the track inside the door. You can remove the door panel and grease it with silicone grease to fix the problem. Usually its not the switch, but if you press it too much the switch will get burned out because it overheats inside from the current. If you remove the door panels, you should be able to switch the left and right switches to trouble shoot the switches. If you switch them and the right one goes down now, then you know the old right switch is bad.
Posted on Sep 12, 2009
The clicking is the relay, that means the relay is ok, if it didn't click it would be defective, you most likely have a faulty power window motor.
Posted on Oct 21, 2008
Switch needs to be replaced. Its a common problem and isnt that difficult to replace. Once you get the door panel off, its pretty much unplug the old one and plug those wires into the new one
Posted on Apr 13, 2009
The switches are done. If you dont want to bother with them again- just buy new ones-....or just take them apart and clean them every 3 days.
Posted on Dec 02, 2009
Tips for a great answer:
Passenger Front Door Module (PDM)
LH Rear Door Module (LRDM)
RH Rear Door Module (RRDM)
Driver Door Switch Assembly (DDSA)
RH Front Power Window Switch
LH Rear Power Window Switch
RH Rear Power Window Switch
LH Front Power Window Motor
RH Front Power Window Motor
LH Rear Power Window Motor
RH Rear Power Window Motor
Class 2 serial data circuit
Power door serial data circuit
PWR WDO 30 Amp Circuit Breaker
DRVMDL Fuse (10 amp)
Driver Door Switch Assembly and Driver Door Module logic, Driver Door Module internal driver operation
PASS MDL Fuse (10 amp)
Front Passenger Door Module logic and internal driver operation
RRDR MDL Fuse (10 amp)
Left Rear Door Module and Right Rear Door Module logic and internal driver operation
Do you know about computer controlled power windows ?
Power Windows Operation
The vehicle is equipped with power windows controlled by the door modules. Each passenger door window can be operated, either from a switch built into the driver door switch assembly (DDSA), or from a switch mounted locally to its associated door. The driver door window can be operated only from the driver door window switch built into the DDSA.
When a window is operated from the DDSA, the DDSA interprets the window switch signal as a specific window switch request and sends the information to the driver door module (DDM) via the power door serial data circuit. The DDM examines the request and checks to see if it has received any class 2 serial data messages from any of the other vehicle modules (i.e. ignition switch position) prohibiting the movement of the window. If the window being operated is the driver door window, and if no prohibitive class 2 messages have been received, the DDM then applies voltage and ground to the driver door window motor to move the window glass as requested. If the window being operated is a passenger door window, and no prohibitive class 2 messages have been received, the DDM sends the request, via the power door serial data circuit, to the appropriate passenger door module. The passenger door module then applies voltage and ground to the passenger door window motor to move the window glass as requested.
When a passenger door window is operated from the power window switch mounted locally to its associated door, the passenger door module first checks to see if the DDM has received any prohibitive class 2 serial data messages. If there are no prohibitive messages, the passenger door module powers the associated passenger door window motor.
Both front door windows have the express down feature. This allows the front door windows to be fully opened by momentarily pulling the appropriate window switch lever to the second detente and then releasing.
Oct 30, 2016 | Buick Cars & Trucks
Sep 28, 2015 | Chrysler Cars & Trucks
Mar 27, 2017 | 2003 Cadillac Deville
Apr 29, 2017 | 2000 Ford Explorer
Mar 23, 2010 | 2005 Honda Accord
Jun 23, 2009 | 1995 Audi Cabriolet
May 26, 2009 | 2004 Saab 9-3
May 23, 2009 | 2003 Ford F250 Super Duty Crew Cab
Jan 25, 2009 | Volkswagen Eurovan Cars & Trucks
Dec 31, 2008 | 2004 Chevrolet Venture Passanger
129 people viewed this question
Usually answered in minutes!