Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Does any body know how to reset the ML350 alarm??....The remote control doesn't work after i replaced a new battery to the remote control. I couldn't even use the remote to lock/unlock the car. I was
SOME OF THE REMOTES REQUIRE THAT THE KEY BE IN THE IGNITION, IN THE ON POSITION. TAKE THE BATTERY OUT AND WAIT 10 MINUTES. THEN PUT THE KEY IN THE IGNITION AND INSTALL THE BATTERY WHILE THE KEY IS TURNED TO THE ON POSITION. HOPE THIS HELPS YOU. PLEASE KEEP ME POSTED. THANKS FOR AN HONEST RATING AND FOR USING FIX-YA. GOOD LUCK
Posted on May 18, 2009
SOURCE: CAR ALARM DEACTIVATION
if the car only has a factory system, then you only need to insert the key to unlock the door to turn the alarm off. There should be a red light on the door panel that blinks and that should show you it's off, not sure try turning the key on the door twice. If it's aftermarket, get a replacement unit.
Posted on Jun 29, 2009
i had the same problem with alarm system in 2005 hatchback (5 door), the dealer was no help, found by accident to spray lube oil in rear door handle as it was rusted inside and not releasing properly, thus setting off the alarm, i oiled it several times and the alarm system works fine now.
Posted on Oct 03, 2009
There are two multiplex control units - one on the driver side and one onthe passenger side - which one did you unplug? The one on the driver side is the main "Brain" while the other one is the one that houses the keyless reciever. According to the service manual, any troubleshooting of this system must begin with the one on the driver side. It can get quite involved because Honda does not provide actual troubleshooting (symptom) charts, just descriptions of the electrical connectors and what conditions should be present at each conector pin under what system condition. (each pin has to be tested to determine what is malfunctioning) The system is not capable of outputting fault codes of any kind.
Posted on Nov 08, 2009
Tips for a great answer:
May 15, 2016 | Cars & Trucks
Oct 12, 2014 | Cars & Trucks
Jan 29, 2014 | Toyota Camry Cars & Trucks
Nov 01, 2013 | 2008 Nissan Sentra
Oct 04, 2010 | 1998 Pontiac Grand Prix
Mar 06, 2010 | 1998 Land Rover Discovery
Feb 23, 2010 | 2004 Ford Taurus
Apr 01, 2009 | 2003 Jeep Liberty
Dec 11, 2008 | Hyundai Motor 2003 Elantra
Nov 25, 2008 | 2004 Ford F150
Aug 23, 2017 | Cars & Trucks
316 people viewed this question
Usually answered in minutes!