Question about 1986 Jeep Grand eer
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
C1 & C2 in your panel are most likely one of the culprits, if no power at heater at seat. Sounds like testing for power at seat switch is easier to do than get at these circuit breakers in the panel. If you have power at switch at seat, then it's not the fuse/circuit breaker. Good reading at this link for you.
Posted on Dec 29, 2008
SOURCE: 2002 Jeep Grand cherokee Ashtray
If they have not changed the design, the retaining spring is part of the "extinguishing bar" (where you put cigarettes out) the clip tends to lock in the down position and needs to simply be pushed back up to engage the retainer in the dashboard opening
Posted on Jan 23, 2009
If you have the owner's manual look up fuses in the index, good illustration. If you don't, I do. It shows a relay and a 15 amp fuse. Look at the passenger kick panel, pull the cover, and it is #2 fuse (second from the top on the left) The see the relay you may have to pull the panel (two screws and a clip) the relay is the third cavity down, third row from the firewal side.
Let me know if this works for you?
Posted on Apr 03, 2009
The idle air control valve is located on the back of the throttle body. It has an oval electrical connector and two torx screws holding it in. Unplug the connector, remove the two screws then lightly tap the body with a soft faced mallet to loosen it from the body.
Once you have it out and prior to installing a new valve clean the seat inside the throttle body where the idle control fits. This must be very clean! Installation is in the reverse order.
To save some cash, pull the valve out and clean it with throttle body cleaner, this usually fixes the problem for quite a while.
Good luck and hope this helps.
Posted on May 28, 2009
This is a problem I have been
seeing more and more of lately. The brake light circuit goes through
the Lamp Outage Module (LOM). When the LOM senses a inoperative lamp,
the Vehicle Information Center (VIC) displays the data to the vehicle
Here is how to test the system (clic for zoom):
Check here for more details about the location of Lamp Outage Module (page 16).
Hope helps (remember rated this help) Good luck.
Posted on Jan 15, 2010
Tips for a great answer:
Apr 25, 2015 | 1996 Jeep Grand Cherokee
Apr 30, 2011 | 1996 Jeep Grand Cherokee
Dec 27, 2010 | 1996 Jeep Grand Cherokee
Oct 06, 2010 | 1996 Jeep Grand Cherokee
May 14, 2009 | 1996 Jeep Grand Cherokee
Apr 01, 2009 | 1996 Jeep Grand Cherokee
Jan 19, 2009 | 2002 Jeep Grand Cherokee
Dec 21, 2008 | 1996 Jeep Grand Cherokee
Dec 03, 2008 | 1996 Jeep Grand Cherokee
40 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: