Question about Chevrolet Colorado
After giving a boost to another vehicle my 2005 Chevy Colorado engine light came on. What is the cause?
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
you need to have the codes retrieved and see if you have a code for the throttle module or pedal position sensor, a common problem is the module on the throttle body, which requires throttle body replacement.
Posted on Apr 24, 2009
remove the battery terminals for about 15 mins, that will reset your computer, if you turn it back on and get the same check engine light there is an underlying problem, only certain codes will trigger that light to come on, you'll need to take it to a mech to be sorted sorry to say, hope all goes well for you, matt
Posted on May 15, 2009
SOURCE: 2005 chevy colorado abs fault
Sounds like water getting in one of the connectors. You will need to see what fault code is in there when the light comes on, then look at that sensor.
Posted on Jun 05, 2009
I paid $18 at the dealer for just the knob. Then I found it online here for $4.70
Posted on Oct 14, 2009
SOURCE: Head lights aimed to high
The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.
You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well
Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)
For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.
For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.
Posted on Nov 13, 2009
Tips for a great answer:
May 08, 2013 | 2005 Chevrolet Colorado
Feb 26, 2012 | 2005 Chevrolet Colorado
Jun 26, 2010 | 2005 Chevrolet Colorado
May 15, 2009 | 2005 Chevrolet Colorado
Apr 20, 2009 | 2005 Chevrolet Colorado
Dec 08, 2008 | 2005 Chevrolet Colorado
169 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: