Question about Ford Bronco
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: bogs down
Even though this is an old post i feel it needs an answer since there is 225 followers wanting an answer. This situation sounds as if this vehicle is either suffering from the Throttle Position Sensor switch which has bad spots in it causing lack of voltage or the Fuel rail pressure regulator which can not keep the fuel pressure built up in the fuel rail making the auto veel like it is running out of fuel.And the transmission speed densor which also controls fuel. The situations for each device has a test that can be done to determine which one it is. And last but not least lets never forget our fuel filter this can cause the exact same problem. I am eliminating the cam sensor because it stabilizes at idle. Eliminating the crank sensor because it too at idle also stabilizes and returns a smooth idle. So a fueling problem is what we have here one of the above. Enjoy and if you need help determining which one just ask me I will help you figure it out. Please rate my advise thanks it is how i receive my achievements.
Posted on Apr 11, 2012
check everything you can under the hood your air intake system all of it especially make sure all clamps are tight .. and make sure all vacuum hoses are good and not cracking or broken or just loose . you might run a little fuel cleaner through a tank of gas too cleaning the engine fuel system up some. just a few ideas.. Jerry
Posted on Apr 12, 2009
i had a van do this same thing to a tee turned out to be a broken key pin in the harmonic balencer causing the timing to ****** replaced balencer and ran like a dream there is a crank sensor grid on the balencer when the key pin broke it trew the timing off
Posted on Jan 14, 2011
Tips for a great answer:
Feb 10, 2015 | Cars & Trucks
Jul 22, 2014 | 1996 Ford Bronco
Nov 11, 2013 | 1990 Ford Bronco
Dec 21, 2010 | 1990 Ford Ranger SuperCab
Dec 01, 2008 | 1990 Oldsmobile Cutlass Ciera
263 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: