Question about Cars & Trucks

Open Question

Where is the evaporative emission system control value on a 1996 ford f150 4.6 L getting code p1443

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Check enging is on---OBD code is PO171 & p1443---how do i fixed this problem


The most likely cause of these two codes tripping together is a vacuum leak associated with the canister purge system. This system collects the vented gasoline vapor from the fuel tank and when the engine is running purges the canister into the manifold.

The P0171 is an indication that the engine is running lean and the P1443 is a fault associated with the Purge Control Valve Solenoid trouble code control valve.

Inspect under the hood for a disconnect vacuum line.

The photos are examples of the vacuum circuit connect via hoses. Listen for a vacuum leak when the engine is running. It would be a whistle sound. Also if work has been done recently look in the area that the work was done under the hood.

26150454-uk2ysmhepcorsq0r4fy0hyob-4-0.jpg

26150454-uk2ysmhepcorsq0r4fy0hyob-4-2.jpg Hope this helps?

Apr 03, 2016 | Cars & Trucks

1 Answer

Code p1443


without knowing your make or model:

  • p1443
    Evaporative Emission Control System Control Valve
  • audi
    EGR Valve Position Sensor Signal Too Low
  • bmw
    Leakage Diagnostic Pump Control Circuit Signal High
  • ford
    EVAP Control System Purge Control Solenoid or Purge Control Valve Fault
  • hyundi
    EVAP System Tank Cap Missing
  • infinity
    Evaporative Emission Control System Control Valve
  • lexus
    Secondary Air Injection Vacuum Switching Valve Circuit Malfunction Bank 2
  • mazda
    Evaporative Emission Control System Large leak detected
  • mitsubishi
    EVAP Purge Control Valve 2 Circuit Malfunction
  • nissan
    Evaporative Emission Control System Control Valve
  • suburu
    Evaporative Emission Control System Vent Control Function Problem
  • suzuki
    EVAP Purge Control Valve Malfunction- Stuck Open
  • toyota
    Secondary Air Injection Vacuum Switching Valve Circuit Malfunction Bank 2
  • volkswagon
    EGR Valve Position Sensor Signal Too Low
  • Dec 07, 2013 | Cars & Trucks

    2 Answers

    Diagnostic code for 96 ford ranger-code number - p1443


    Check the voltage on the purge flow (PF) sencor, with engine running...

    Jun 19, 2011 | Ford Ranger Cars & Trucks

    2 Answers

    Check engine lite came on code is p1443 what does this code mean


    P1443 Evaporative Emission Control System Control Valve The Evaporative Emission Control System monitors the fuel vapor flow between the engine intake manifold and the EVAP canister. The system failure occurs when a leak or blockage between the intake manifold, the EVAP canister purge valve and the EVAP canister is detected by the PCM.

    Code P1443 Possible Causes:

    - Pinched, blocked or plugged fuel vapor tubes/hoses (except between fuel tank and EVAP canister)

    - Damaged EVAP canister

    - Disconnected, cracked or cut fuel vapor tubes/hoses (except between fuel tank and EVAP canister)

    - Damaged EVAP canister purge valve

    May 04, 2011 | 1997 Ford Escort

    1 Answer

    P1443 code How do I fix this code problem on my 97 Ford ranger?


    P1443 is the Evaporative Emission Control System Control Valve. Any time you get this code always check your gas cap. If it is not installed all the way, or leaks, it can cause the evap emission code to come up. If the cap is okay...

    The problem is probably caused by the Canister Purge Assembly. This assembly connects the intake manifold to the charcoal canister and the assembly is made up of hoses, a valve and a sensor. On the 1997 Ranger, it is located near the front of the engine compartment on the driver's side (the canister is right behind the driver's side headlight). Apparently, if there are any cracks in the hoses, or if the valve or the sensor wears out, this will cause the check engine light to come on, and return the P1443 code.

    Part numbers for the canister purge solenoid/flow sensor assemblies:

    F57Z-9C987-AB Canister Purge Solenoid/Flow Sensor
    Assembly - 2.3L F57Z-9C987-CA Canister Purge Solenoid/Flow Sensor
    Assembly - 3.0L F57Z-9C87-BA Canister Purge Solenoid/Flow Sensor
    Assembly - 4.0L

    Part cost = $65 to $100 depending on engine size - good luck :O)

    Feb 17, 2011 | Ford Ranger Cars & Trucks

    2 Answers

    P1443 computer code what is it on my 1996 ford thunderbird


    P1443 = A problem with the EVAP purge flow system
    Continuous Memory Diagnostic Trouble Code (DTC) P1443 indicates an incorrect Evaporative System Purge Control Valve flow.

    Possible causes:
    -- Obstructed, open or cracked hoses between EVAP canister purge valve and intake manifold.
    -- Damaged EVAP canister purge valve.
    -- Damaged PF sensor.

    Hope help with this.

    Apr 25, 2010 | 1996 Ford Thunderbird LX

    2 Answers

    What does the code p1443 mean on a 1996 ford escort?


    Code, 443 is a sign of a bad Cainster Purge Solenoid (E6ZZ-9C915-A) and a bad Thermistor/Flow Sensor (F57Z-14A606-BA)

    Dec 27, 2009 | Ford Escort Cars & Trucks

    2 Answers

    Emission test showed error code p1443.check engine light stays on.1996 ford ranger.I looked the problem on ford emission control error and says it could be canister,purge flow sensor or purge valve.I would...


    You might want to try "google images" just type in your vehicle and what your looking for. Here's an example (link) of what to look for.

    http://www.fordmuscle.com/forums/attachments/all-ford-techboard/4132d1212515121-code-p1443-help-96tbird_evap.jpg

    Oct 25, 2009 | 1996 Ford Ranger SuperCab

    2 Answers

    1996 Ranger-code P1443-"auxillary emmisions controls" is the decription that I got from Advance Auto Parts diagnostic--What can the problem be?


    the Canister Purge Assembly. This assembly connects the intake manifold to the charcoal canister and the assembly is made up of hoses, a valve and a sensor. it is located near the front of the engine compartment on the driver’s side (the canister is right behind the driver’s side headlight). Apparently, if there are any cracks in the hoses, or if the valve or the sensor wears out, this will cause the check engine light to come on, and return the P1443 code.

    Oct 05, 2009 | 1997 Ford Ranger SuperCab

    1 Answer

    Codes p0402 and p1443 96 ranger


    this means exactly what it says, the emission control valve is faulty and needs replacing.
    Basically the valve is in an open position when it should be shut or partially shut.
    Replace the valve and this should cure both codes.

    May 07, 2009 | Ford Ranger Cars & Trucks

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    22 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Cars & Trucks Experts

    yadayada
    yadayada

    Level 3 Expert

    76846 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22246 Answers

    Randy Ohler

    Level 3 Expert

    14585 Answers

    Are you a Car and Truck Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...