Question about 2000 Toyota Avalon

1 Answer

Excessive dust in trunk of Toyota Avalon. Replaced the trunk seal and checked all around with slip of paper -- seal is tight but trunk is filthy. (We live on a gravel road.)

Posted by on


1 Answer

Climb inside trunk check for daylight p.s. make sure you have way out or have another person on outside to let you out

Posted on Nov 24, 2013


4 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 1 Answer


There is a hidden deactivation button in the glove box. Just push it and your problem should be solved.

Posted on Jan 24, 2010

  • 336 Answers

SOURCE: how to reset the check engine light on a 1999 toyota avalon xls

You need to have a code reader/scan tool hooked up to retrieve the code/s that triggered the engine light. You can have this done at most auto parts stores for free. Try Auto zone, Checkers, Napa, or Murray's. The engine light will eventually go out if the computer does not receive any codes after many cycles turning the ignition on and off. It will not go out if there are codes still present. After you've retrieve the code/s bring them back here and we will have a better understanding of what caused them.

Posted on Jun 14, 2010

  • 1 Answer

SOURCE: 2000 Toyota Avalon trunk release button on dash

I had the same proble \m. You must of hit the button in the glove box. Just press the button in the glove box, and try it again.

Posted on Jan 25, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Torque specifications for 2009 Toyota Avalon oil filter

25 newton meters / 18 lb-ft

snug is perfectly fine. The canister cap has an oring. It will seal finger tight. All your trying to do is snug it up so that it doesn't come loose

Feb 26, 2015 | 2009 Toyota Avalon XL

2 Answers

Water in trunk of toyota avalon

Either your rear windows leaks or the boot seal is cracked, torn or not glued properly on the car body flange. Check these first, or try and sit in the boot with a strong torch and have someone to hose the rear part of the car. Usually you'll find the leak and fix it.

Aug 12, 2014 | 2006 Toyota Avalon XLS

1 Answer

Water in trunk

Dry trunk seal, then lay toilet paper on seal, close trunk, hose down the trunk , towel dry exterior, then open trunk and inspect paper for wetness

Mar 11, 2014 | 2009 Toyota Camry

1 Answer

Toyota Avalon 1997

I'm thinking its possible you may have a short(wires touching together or on metal) somewhere. But before anything I would check your fuses. Also make sure your battery terminals are tight.

Jul 11, 2013 | Cars & Trucks

2 Answers

2007 Toyota Avalon, trunk will not open with key fob or button in car, no noise when I press either, have a flat tire and can not get in the trunk

Button inside glove box (on left side) disables trunk opening...just push it again and trunk can be opened...worked for my 2007 Avalon. I must have bunped it by accident to disable the trunk and didn't realize the button existed. Toyota dealer said bring it in for $125 diagnostic but then I saw the cure in the car manual.

Nov 21, 2011 | 2007 Toyota Avalon

1 Answer

How do I remove the oil pan on a 1998 Toyota Avalon?

Jack your car first , Open the oil drain plug and let the oil drain, start to remove the bolts around the oil pan , take it off and If you are not willing to change the pan then wash it really good and scrap the old gasket with a blade or sand paper.

To put it back, use new gasket and silicon sealant around the oil pan and make sure to put it back as it was and make sure everything is sealed because you dont wanna have an oil leak after you get done. Good luck Bro

Dec 17, 2010 | 1998 Toyota Avalon

1 Answer

On a 1995 toyota 4Runner the cranshaft seal i replaced but it's still leaking what is the problem?

The only way a new seal would leak is if its improperly installed, damaged, or excessive build up within the seal seats. Check for leaks around the seal area, or from the upper parts of the engine, that may be running downward!!

Aug 02, 2010 | Toyota 4Runner Cars & Trucks

1 Answer

How does one replace the serpentine belt on a 2004 toyota avalon?

Pull on the belt to see the tensioner pulley move put a wreanch on the nut holding the pulley on and pull the tensioner back as now the belt is loose slip it off the easiest pulley to grt to. work the belt off the reat of the pulleys and work the new one back on till you getr back to the easy one pull back on the tentioner and slip the belt over the easy pully letting loose of the tenstioner will keep the belt tight.

Jun 25, 2010 | 2004 Toyota Avalon

1 Answer

1997 toyota avalon oil pan gasket leaking , seems

Are you sure its the oil pan most leaks come from the valve cover gaskets up above. check the corners of the valve covers. If the pan needs re-sealed you will have to remove the flex pipe.

Jul 07, 2009 | 2002 Toyota Camry Solara

Not finding what you are looking for?
2000 Toyota Avalon Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts


Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8589 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides