The flasher unit on a Toyota Land Cruiser HZJ75 is usually located in the fuse box under the dashboard on the driver's side of the vehicle. To access the flasher unit, you will need to:
- Open the driver's side door and locate the fuse box cover. It is usually located under the dashboard on the left side of the steering wheel.
- Remove the fuse box cover: Depending on the model of your Land Cruiser, you may need to use a tool like a flat-head screwdriver to gently pry the cover off.
- Locate the flasher unit: Once the cover is removed, you should be able to see the various fuses and relays in the fuse box. The flasher unit is usually labeled as "flasher" or "turn signal relay." It may be a small, rectangular component with wires or terminals attached to it.
- Remove the flasher unit: Depending on the model of your Land Cruiser, you may need to use a tool like a socket wrench or pliers to remove the flasher unit. Some models may have a clip or tab that holds the flasher unit in place, which you will need to release before removing it.
- Replace the flasher unit: Reverse the steps above to install the new flasher unit. Make sure the new unit is securely fastened and all the wires and connectors are properly connected.
If you are not comfortable or experienced in automotive repairs, it is recommended to have a mechanic perform the flasher unit replacement.
×