Question about 2005 Chevrolet Monte Carlo
What tools are needed to repair my back breaks on my 2005 chevy monte carlo
Its a good idea to have rear disc caliper compressor. prob can get one from AutoZone (loan/rent)
Posted on Nov 20, 2013
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: 1995 Chevy Monte Carlo
you need to take the upper and lower steering column covers off, should be 3 screws in bottom, take tilt steering lever out if neccessary, it is a 2 peice cover, take apart, change switch and put back together
Posted on Dec 03, 2008
3/4 inch allen wrench and a big hammer to get the rotors off when changing them. Big pliers or something to push the piston back into the caliper bore.
Posted on Dec 09, 2009
On the supercharger snout, located immediately to the right of the coil pack mounted closest to the supercharger, is the supercharger oil plug. It is a hex nut that uses a 3/8" allen wrench.
When the engine is cold, remove the plug. You can use any item of your choice that will create vacuum such as a siphon, a turkey baster or my favorite is a squirt bottle nozzle with about a 12" line on it.
Insert your hose into the reservoir hole and remove as much of the oil as you can. If you use the squirt bottle nozzle then if the hose is long enough then you should be able to "snake" the hose down into the reservoir almost the entire length of it by pushing the end of it toward a "1 o'clock" position if you are standing directly in front of the car.
Squirt the oil into another container. If your oil is the GM supercharger oil, it is animal fat based and biodegradable and can go in your regular trash.
Refill with GM supercharger oil or any other appropriate lightweight oil specified to meet requirement for the Eaton M90 supercharger. An equivalent oil can be purchased from www.zzperformance.com.
Fill the reservoir until the fluid reaches the bottom of the fill hole threads.
As an added note, if you lose the hex nut cap for the reservoir it isn't necessary to order a new one. A 7/8" fine thread bolt will fit perfectly but be careful not to torque more than 8ft/lbs with either the nut or bolt.
Posted on Nov 08, 2010
Tips for a great answer:
Jan 30, 2016 | 2005 Chevrolet Chevrolet Impala LS
May 12, 2010 | Chevrolet Monte Carlo Cars & Trucks
May 10, 2010 | 2004 Chevrolet Monte Carlo
Mar 17, 2010 | 2004 Chevrolet Monte Carlo
Oct 16, 2009 | 2002 Chevrolet Monte Carlo
Sep 23, 2009 | 1995 Chevrolet Monte Carlo
Jul 17, 2009 | 1999 Chevrolet Monte Carlo
May 15, 2009 | 2005 Chevrolet Monte Carlo
74 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: