Question about 2013 Nissan Rogue

1 Answer

Will not start starter doesnot turn over ignition

Power comes on but engine doesnot turn over

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Greenhorn:

    A rookie expert who has answered 20 questions on their first day.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 69 Answers

IF ITS A AUTO MAKE SURE IT IS IN PARK POS

Posted on Nov 20, 2013

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75822 Answers

SOURCE: Ignition won't power Starter to crank

sounds like the starter solenoid is defective

Posted on May 27, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1994 bmw e36 320i engine won't turn over or and no clicking sound coming from starter when i turn the ignition but all the light comes on what could be the problem,


The starter won't crank. If nothing happens when you turn the ignition key to the "Start" position, it means that the starter motor doesn't turn over the engine. Most commonly this could be caused by a dead battery; here is How to check the battery. ... The starter motor itself or a starter solenoid could be bad.13 Aug 2013

Why a car won't start - troubleshooting tips - Samarins.com


car not starting when key is turned to the on position Google Search

Dec 20, 2016 | BMW Cars & Trucks

1 Answer

Why ,when i go to start my jaguar the ignition key doesnot even click for ignition ,batry full all other items on the dash light up


What year and model. Turn on headlights and turn key to start , do the lights dim if they do starter is faulty. If not check the thin wire to the starter is connected

Feb 04, 2015 | Jaguar Cars & Trucks

1 Answer

2003 jeep grand cherokee will not turn over


Constant 12-volt power is applied through 40 A FUSE 8 in the power distribution center (PDC) to the engine starter motor relay and through 40A fuse 14 to the ignition switch. If the park/neutral position switch is connected to ground, turning the ignition switch to START causes 12 volts to pass through 10A fuse 31 in the junction block and the engine starter motor relay coil to close the relay and apply 12 volts to the starter. Any of the parts mentioned could be open or defective.

Apr 01, 2014 | Cars & Trucks

1 Answer

I have a 2003 Saturan Ion that won't start


Hi, this is what you should do when your car won't start. Diagnosing a no-start condition requires a logical approach to figuring out what might be preventing your car from starting. First, if the engine won't even crank over when you turn the ignition to START, your car obviously won't start.
When you turn the ignition key to start your car, voltage from the battery flows through the ignition switch to the Park/Neutral safety switch and/or brake pedal or clutch pedal safety switch (you have to push the pedal down before the circuit will complete) to the starter relay or solenoid. When the relay or solenoid is energized by voltage from the ignition switch circuit, it closes a contact that routes more power from the battery directly to the starter to crank the engine. The starter motor spins, pushes the starter drive gear to engage the flywheel and cranks the engine.

If the engine fails to crank, there is a fault in one of the components in the battery/ignition/starter circuit. Check it out.....
  • Low battery (Check battery voltage, recharge if low, or jump start with another vehicle or battery charger).
  • Loose or corroded battery cables (Inspect, clean and tighten BOTH ends of BOTH battery cables).
  • Bad starter relay wiring connections or ground connection (Inspect, clean, tighten wiring connections).
  • Bad starter relay/solenoid (Check for voltage at relay, if relay has voltage but there is no "click" when key is turned to start, replace relay).
  • Bad starter (Jump battery voltage direct to starter to see if it spins, or remove starter and have it bench tested at auto parts store).
  • Damaged starter drive or teeth on flywheel (Remove starter and inspect drive gear and flywheel teeth, replace damaged parts if necessary).
  • Bad ignition switch (Check to see if voltage reaches starter relay/solenoid when turn to start. If not, check for open P/N switch and brake or clutch pedal switch. Replace ignition switch if defective).
  • Open P/N safety switch, or open Brake Pedal Safety Switch (automatic transmission) or open Clutch Pedal Switch (manual transmission). Bypass switch with jumper wire to see if engine cranks, or use test light or voltmeter to check for voltage passing through switch when ignition is turned to start.
  • Engine seized due to bearing failure or internal damage (Use socket and long handle to see if engine can be turned by hand, if not engine is locked up).
  • Engine hydrolocked due to coolant leak from leaky head gasket (Use socket and wrench to see if engine rotates, remove spark plugs and see if coolant comes out or engine can not be cranked with plugs out).

Dec 02, 2010 | 2003 Saturn ION

1 Answer

My car does not start or turn over. The radio works and so does the fan.


When you turn the ignition key to start your car, voltage from the battery flows through the ignition switch to the Park/Neutral safety switch and/or brake pedal or clutch pedal safety switch (you have to push the pedal down before the circuit will complete) to the starter relay or solenoid. When the relay or solenoid is energized by voltage from the ignition switch circuit, it closes a contact that routes more power from the battery directly to the starter to crank the engine. The starter motor spins, pushes the starter drive gear to engage the flywheel and cranks the engine.

Low battery (Check battery voltage, recharge if low, or jump start with another vehicle or battery charger).
Loose or corroded battery cables (Inspect, clean and tighten BOTH ends of BOTH battery cables).
Bad starter relay wiring connections or ground connection (Inspect, clean, tighten wiring connections).
Bad starter relay/solenoid (Check for voltage at relay, if relay has voltage but there is no "click" when key is turned to start, replace relay).
Bad starter (Jump battery voltage direct to starter to see if it spins, or remove starter and have it bench tested at auto parts store).
Damaged starter drive or teeth on flywheel (Remove starter and inspect drive gear and flywheel teeth, replace damaged parts if necessary).
Bad ignition switch (Check to see if voltage reaches starter relay/solenoid when turn to start. If not, check for open P/N switch and brake or clutch pedal switch. Replace ignition switch if defective).
Open P/N safety switch, or open Brake Pedal Safety Switch (automatic transmission) or open Clutch Pedal Switch (manual transmission). Bypass switch with jumper wire to see if engine cranks, or use test light or voltmeter to check for voltage passing through switch when ignition is turned to start.
Engine seized due to bearing failure or internal damage (Use socket and long handle to see if engine can be turned by hand, if not engine is locked up).
Engine hydrolocked due to coolant leak from leaky head gasket (Use socket and wrench to see if engine rotates, remove spark plugs and see if coolant comes out or engine can not be cranked with plugs out).

Jul 14, 2010 | 1995 Suzuki Sidekick

2 Answers

After changing the starter and alternator and installed a new ignition switch my 1997 Nissan p/u started up fine. Drove it around town, stopped, turned off the engine and it started again right away. Drove...


Check and make sure you are getting power to the ignition switch and to the stator wire on the starter. Turn the key on and and measure the volts going to the starter on both wires. You should a atleast 12 volts going to the stator wire and to the main wire from the battery. If you are not getting power there it could be a fuseable link in the power wire from the ignition. I noticed that you replaced the ignition switch make sure the rod from the key switch has not come out of the switch.

Sep 16, 2009 | 1997 Nissan Pickup

3 Answers

When I turn the ignition, the starter doesnt turn at all. I changed the Ignition coil and it felt like it wanted to start but barely. I disconected one of the cables and put the screw driver in it but...


If the starter does not turn the engine over you will get no spark. Lets start over. You turn the key , does the engine turn over ? Does it turn over and not crank up and run?

Jul 24, 2009 | Ford Focus Cars & Trucks

1 Answer

Does not start, god battery, and starter, no power going starter


Most likely bad cell on battery with not enough amerage or the solenoid on the starter is going bad. Turn car to on and Jumper the solenoid if it starts replace starter as that part is hard to get on its own.

May 09, 2009 | 1997 Nissan Quest

1 Answer

1006 olds cutlass supreme won't crank


try taking a power wire from the battery positive and getting it on the starter terminal and seeing if the starter turns over if it does it could be a fusible link that runs between the starter terminal and the relay

Sep 29, 2008 | 1995 Oldsmobile Cutlass Supreme

2 Answers

H2 Hummer


Today 11-12-08 my 2003 H2 Hummer would not start. Checked battery it ischarged. Cables tight. Tried to start with portable booster pak. No go. Tridto jump start with my wife's Suburban. Still no go.
When I turn the switch I hear a single click and that is it. No engine turning over. While trying to start with key the headlights go out. Out of ideas, Will take to Chevy garage in am. Will post solution.

Aug 23, 2008 | 2003 Hummer H2

Not finding what you are looking for?
2013 Nissan Rogue Logo

Related Topics:

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

723 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...