Question about 1997 Acura CL
That big hose in the RAD goes to it.
just follow that hose.. and bingo.
here , i log in to alldata.com
Posted on Dec 01, 2013
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
back side of block under intake if its a 2.2 or a 2.3 if its a 3.0 its on the passenger side of engine bay if you turn the wheel you will be looking at it
Posted on Feb 03, 2009
SOURCE: transmission dipstick location
Sorry, I'm just now getting it to you. The dipstick is located on the passenger side of the car way down at the bottom. It should have a yellow handle. It's just to the right and down of the battery. Let me know if you can't find it still and I will get you a picture somehow.
Posted on May 17, 2009
Removal & Installation
Remove the thermostat housing bolts
Pull the water outlet neck away from the housing
Note the installed position of the thermostat, then remove it
A new gasket must be installed before installation
Install the thermostat with the air bleed valve at the top
Posted on Nov 03, 2009
Testimonial: "thank you very much on the solution, didn't take as long as i expected!"
Tips for a great answer:
Nov 02, 2017 | Acura Cars & Trucks
Jul 26, 2015 | 1997 Acura CL
Jul 04, 2014 | 1997 Acura CL
May 28, 2014 | 1997 Acura CL
Jul 22, 2010 | 1997 Acura CL
Jul 11, 2010 | 1997 Acura CL
Nov 03, 2009 | 1997 Acura CL
380 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: