Question about 2004 Suzuki Forenza

1 Answer

Remove door pannel - 2004 Suzuki Forenza

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Suzuki Master
  • 20,706 Answers

How to? its in the FSM>
but in general, (generic) you remove all screws. (some can be hidden in pull handle arm rest, look careful, and the crank if you have one.
the door pull lever can have cover, (pops off) and screw behind it.
then starting in the bottom edge, (we call it a door card) we pull gently or use a plastic lever flat bar (no damage) and pry the bottom rear corner, (10,000 youtube hits) and it goes pop.
it has what i call pop off fasterners. (plastic.)

why not get the FSM if doing all maintenance on the car.
that why you dont break stuff. and see the warnings and safety issues.

Posted on Nov 19, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Basic instructions on how to replace drivers side inside door handle on 1997 Chevy 1500 truck.


1. remove the triangle at the front of the window
2. remove the trim around the inside door handle
3. with the surround removed - pry the switch in the door up -it is connected with pressure seals- if u get a screw driver under it and push up- they will pop out as u go around the edge of it .leave the switches connected to the wiring since u have to put the window down in a little bit
4. remove the 2 screws in the door handle here they are starting to come out
5. put the windows down about a half inch or so....this will get easier to get the door handle bolts
6. using a door pannel tool disconnect the pannel from the door. you may break some of the pannel connectors so you may want to have a few replacements on hand for this
7. when the door pannel is loose enough to take off (don't remove it yet)- disconnect the wiring from the window/lock switches at this point
8.disconnect the courtesy light from the pannel
9. remove the plastic door pannel from the door and set it aside.

Dec 20, 2011 | 1997 Chevrolet K1500

1 Answer

How do i remove the wing mirror (power adjust & power fold) on the ford f250 super duty?


Roll the window down first, you will need 2 hands. Pull the small cover off that is at the top front of the door pannel. You will then disconnect the wire connector and remove the three 11mm nuts that are holding the mirror in place. Pull mirror out and replace.

If you dont have just that little pannel you will have to remove the door pannel. If you dont have power windows pull the cover out on the window crank and move it to the side, there will be a screw holding the crank in place. Remove it. If you do have power windows remove the window control switch plate (it will just pop up using a small screwdriver) and disconnect the wires. If equipped, remove the front door trim panel reflector or the courtesy lamp lens. Then remove the screws. DO NOT pull directly outward on the door pannel, something will brake. Remove the front door trim panel by pulling it straight upward.Lift and remove the front door trim panel. Then the nuts holding the mirror will be visible, remove and replace the mirror.

Dec 07, 2010 | 2000 Ford F250 Super Duty Crew Cabs

1 Answer

How do i remove the door pannels


remove the screws for the catch all box ot the bottom of door, remove the window switch and the two hex head screws that hold the door panel on under the switch. remove the screws under the arm rest and remove it. When that is done it just un snaps from door

Mar 12, 2010 | 1989 Ford Crown Victoria

1 Answer

Need to fix drivers side door , need to remove inside panel on door


Usually a few screws on the handle etc. When they are removed all that is left holding the pannel are pull clips carefully push a flat scredriver between the pannel and the door pry carefull until one or two snap open you should then get your hand behind the pannel then a sharp pull will remove it.

Aug 05, 2009 | 2001 Ford Explorer Sport Trac

2 Answers

Replacing passenger side mirror


no the door pannel does not need to come off but there is a triangle shaped plastic trim pannel above the door pannel that needs to be removed to access the mounting bolts.

May 28, 2009 | 2003 Nissan Xterra

1 Answer

How to change door mirror


remove the triangle shaped trim pannel on the inside of the door, above the door trim pannel, this will reveal a couple 3-4 nuts that need to be taken off, support the mirror from the outside, once those nuts have been removed, the mirror will be free to be removed, NOTE: if the vehicle is equipped with power mirrors you will need to free the power clip before you remove the mirror

MIKE

May 18, 2009 | 2004 Ford Taurus

1 Answer

Changing the front speaker 2001 Eclipse Spyder


There are 7 screws all together to remove the door pannel. First, you have to take off the hanlde for the door. the 2 plastic covers on the handle pop off revealing 2 screws on the top and bottom, remove those. then behind the the door handle on the inside, pull it as if you were to open it and there is a screw that you have to remove. Then there are 2 screws on either side of the door pannel, both are farily close to the top, remove those, and then its just a matter of popping the pannel off. start from the bottom, pop it off then slide it up. becarefull, after the door panel is free, there is a connection for the power doors and windows unhook that then the pannel will be free. after that the speaker will be right there and its common sense on removing that. good luck.

Mar 27, 2009 | 2001 Mitsubishi Eclipse Spyder

1 Answer

Need to replace interior driver side door panel on 2003 jeep wrangler, full size doors. how do i get it off?


to remove the door pannel there is 2 screws and then like everything ells on jeep there are little clips that you need to pull off, try removing the screws and then pulling from the interior pannel

Mar 21, 2009 | 2003 Jeep Wrangler

1 Answer

Car powder windows 1994 grand Marquis


couple of screws along bottom of door pull slightly on bottom of pannel and lift straight up

Dec 14, 2008 | 1994 Mercury Grand Marquis

1 Answer

1999 Rodeo Electric Windows Switch Panel - Drivers Side


gotta remove the door panels there a panel removing tool looks like a snakes tounge but bigger these pop out your door pannel
they take the panel pins out without damageing the door pannel
disconnect electric switches

the electric assembly in side is rivited in so is your going to remove gears you need to drill out revits then work it out of door panel

May 28, 2008 | 1999 Isuzu Rodeo

Not finding what you are looking for?
2004 Suzuki Forenza Logo

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...