Question about 2003 Buick Rendezvous

Open Question

Where is voltage regulator 03 rendezvous - 2003 Buick Rendezvous

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 buick rendezvous driver side power window wont go down


System circuit breaker (POWER WDWS Circuit Breaker 30A) other windows work so can't be this . Do you hear anything like the window motor trying to work inside the door ? If not you'll need to pull the door panel off ,check for B+ voltage at the window motor ! Videos on youtube on checking power windows . How To Diagnose your Power Window Problem Is the Switch or motor bad Or the regulator could be the problem , this is a commond problem as is broken wires from the body of the vehicle located in the rubber boot !

Dec 16, 2016 | 2006 Buick Rendezvous

2 Answers

Voltage problem.


the problem is in the voltage regulator
maximum voltage is controlled at 14.5 to 14.8 volts depending on whether the voltage regulator is in the ECM or not
but 14.8 would be max allowed any higher can damage the electronics of the vehicle including the ECM
take it to an accredited auto electrician, have it test and adjusted or the regulator replaced

Nov 25, 2015 | Buick Rendezvous Cars & Trucks

2 Answers

Speedometer stopped working 2004 Rendezvous


Pretty common problem with these. Here's a guide to learn how to fix GM instrument clusters yourself, I used it to fix mine and it worked great.How to guide for Rendezvous instrument cluster repair

Jul 22, 2010 | 2004 Buick Rendezvous

1 Answer

Fuel gauge doesnt work. Put in new fuel pump, no f...


Common issue on the 03-06 Rendezvous instrument clusters, usually it's caused by failing stepper motors on the cluster's circuit board and can be repaired. Check out this page for info on how to get it fixed - Rendezvous fuel gauge doesn't work

May 19, 2010 | 2004 Buick Rendezvous

1 Answer

What would cause a gas gauge to read one thing then read something else and move different times even after feeling the gas tank up .


Three possibilities...
1. Loose wire connection somewhere, probably the tank unit.
2. Faulty instrument panel voltage regulator.
3. Faulty gauge, either panel unit or tank unit.

Apr 18, 2010 | 2004 Buick Rendezvous

1 Answer

Speedometer doesnt work


This is pretty common on the 03-05 Rendezvous instrument clusters, it's caused by faulty stepper motors on your cluster's circuit board. To find out more about it and how to fix it check out this page - Rendezvous speedometer fix

Oct 12, 2009 | 2005 Buick Rendezvous

2 Answers

2003 buick rendevous speedometer gauge malfunction it goes up to high for rpm


Pretty common problem with these. Here's a guide to learn how to fix GM instrument clusters yourself, I used it to fix mine and it worked great.How to guide for Rendezvous instrument cluster repair

Oct 08, 2009 | 2003 Buick Rendezvous

1 Answer

I need a printable diagram for replacing an altenater on a 1994 ford mini-van. Does anyone know a website to find one for free?


Removal
  1. Disconnect battery ground cable (14301) .
  1. Remove snow/ice shield.
  1. Remove engine air cleaner intake tube (9A624) .
  1. Disconnect the generator voltage regulator wiring (14305) to the voltage regulator.
  1. Remove wiring connector bracket.
  1. Loosen the drive belt tensioner (6B209) and remove the drive belt .
  1. Remove the bolts holding the voltage regulator to the generator bracket (10A313) .
  1. Remove the voltage regulator from the generator bracket .
Installation
  1. Position the voltage regulator on the generator bracket .
  1. Install the bolts and tighten to 40-55 Nm (30-40 ft-lb).
  1. Install the drive belt over the generator pulley .
  1. Adjust the drive belt tensioner as outlined in Section 03-05 .
  1. Connect generator voltage regulator wiring to the voltage regulator. Tighten generator Battery Positive Voltage (B+) wire attaching nut to 9-12 Nm (6.5-9 ft-lb).
  1. Install wiring connector bracket.
  1. Install engine air cleaner intake tube .
  1. Install snow/ice shield. NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the powertrain control module (PCM) (12A650) relearns its adaptive strategy. The vehicle may need to be driven 10 miles or more for powertrain control module to relearn the strategy.
  1. Connect battery ground cable .

Jul 28, 2009 | Ford Aerostar Cars & Trucks

1 Answer

03 Buick Rendezvous


Same this happened to me on my 2004 Rendezvous. The fuse popped out. Just push it back in. The fuses are located on the left side panel of the front passenger seat. If they are not marked there is a map in the owner's manual.

Jul 10, 2008 | 2003 Buick Rendezvous

Not finding what you are looking for?
2003 Buick Rendezvous Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...