Question about Cars & Trucks

Open Question

VSA and ABS lights on 2009 Honda Accord LX

Lights came on while driving and have stayed on. Recently had rear brakes and calipers replaced

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 116 Answers

SOURCE: Rear Brake Caliper

Most auto parts stores have a little cube that fits on a 3/8 ratchet wrench. use this cube to screw in your caliper. it has various nibs on it to fit a number of brake calipers. costs about 10 bucks. screw it in clockwise until its almost flush to the caliper housing...if you screw it in too far...the boot will pop over the piston and you will have a bigger mess. sometimes a screwdriver can be used to turn it but i prefer not to bleed. lastly make sure the grooves on the brake caliper piston is horizontal as to allow the caliper to slip over any "Nibs" on the new pads that are for alignment purposes.

Posted on Mar 15, 2009

  • 1596 Answers

SOURCE: rear brake caliper on honda civic 5 door

While replacing REAR CALIPERS Park Brake Should NOT BE APPLIED Until Completely DONE with PROCEDURE,Nor Should it be Released During Procedure. As isogeorge Said Your Problem MAY Be in the Adjustment of the PARK BRAKE CABLE, Requiring removal of Rubber BOOT @ HANDBRAKE and Tightening or Loosening of Cable whichever you deem Appropriate. In My Thoughts it is too tight thus Engaging PARK BRAKE SWITCH turning ON LIGHT. PLEASE Feel FREE to Refer Back to Me For ANY Assistance with this Problem, Hope this Gets you on the right Track and Solves your Problem.

Posted on Jun 08, 2009

peterrance19
  • 399 Answers

SOURCE: 205 honda crv, vsa, abs, and triangle lights are

check your warrentry y could be covered

Posted on Nov 13, 2009

Sean80000
  • 1867 Answers

SOURCE: 1994 hoda accord lx brakes

Please refer to the link below.

http://corp.advanceautoparts.com/english/youcan/asp/ccr/ccr20011001bb.asp

Posted on Dec 01, 2009

  • 1244 Answers

SOURCE: 91 honda accord brake lights stay on replaced

are you sure you the adjustment to it is correct the button in the end of the switch has to be fully depressed to deactivate the circuit

Posted on Jan 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 acura tl 6speed standard. VSA light/triangle light/parking brake light come on.


your vsa is vehicle stability assist that works with the abs system, verify brake calipers for proper functioning, sounds like breaks stick and cant return efficiently after breaking, vsa is a traction control light, if both lights remain on without flashing, those systems are disabled due to a problem, scan vehicle for possible abs sensor malfunction

Jan 06, 2017 | Acura Cars & Trucks

1 Answer

2010 honda accord vsa light came on and car won't start


Vsa and a brake job doesn't shut down the engine. Have the code read.

Nov 26, 2016 | Honda Cars & Trucks

1 Answer

Vsa,brake, abs linght on and D flashing when I turn on key


You need to have the vehicle scanned for fault codes and then the causes of those codes diagnosed.

You will need to have this car checked out by a professional with the right diagnostic equipment for Hondas. The Vehicle Stability Assist (VSA)***, brake and ABS warnings may just be due to a failed sensor or sensors but you need to have a proper diagnosis carried out so the causes can be identified and any failed parts replaced.

The flashing D light relates to the auto transmission and may well be a caused by a faulty sensor on the transmission or something else. The correct scanner should throw up any fault codes being generated. In the meantime if your Accord model has the engine bay filler tube and diptstick for the auto transmission , check your fluid level in the auto transmission.

***VSA..................
http://techinfo.honda.com/rjanisis/pubs/OM/RL0000/RL0000O00189A.pdf

Nov 19, 2015 | 2009 Honda Accord

1 Answer

Honda ridgeline dash lights out


Dashboard lights - Honda Ridgeline Owners Club Forums

www.ridgelineownersclub.com > ... > Interior
Jul 14, 2009 - 11 posts - ‎8 authors Dashboard lights Interior. ... I read the threads about button lights burning out, has anyone had any problems with the gauge lights? I know the ... Replacing dash board lights?
11 posts
Nov 25, 2011
ABS, VSA and brake lights all on!
11 posts
Jul 24, 2011
VSA, VTM, TMPS, ABS, Brake warning lights
11 posts
May 30, 2010
VSA and warning light!
11 posts
Feb 15, 2006
More results from www.ridgelineownersclub.com

Aug 25, 2015 | 2007 Honda Ridgeline

2 Answers

2007 honda accord. VSA and ABS lights stay lit when the car is on. lights do not blink and the switch to turn on VSA doesn't do anything when pressed now.


VSA and ABS use anti-lock brake sensors to complete the calculation.

The first thing to check is to make sure all 4 of the ABS sensors are clean.

Go to your local car wash and clean the wheels first.
KEY OFF / then reconnect the VSA sensor.

Pull the OBDII and email it to me.

Jan 16, 2014 | Honda Accord Cars & Trucks

1 Answer

Honda Accord ABS light stays on


rear brakes are also ABS

Nov 25, 2012 | 2002 Honda Accord

2 Answers

I also got code u0122 on honda accord 09 showing abs,vsa,and brake light need help please!


code u0122 fcan malfunction ecu to vsa. dealership has to fix.problem in your ecm and vechicle stability assist.

Nov 08, 2011 | 2009 Honda Accord

2 Answers

91 honda accord brake lights stay on replaced


are you sure you the adjustment to it is correct the button in the end of the switch has to be fully depressed to deactivate the circuit

Jan 19, 2010 | 1991 Honda Accord

1 Answer

1992 Honda Accord LX intermittantly shifts correctly


-very important check for brake light when pressed (outside rear)
-did u recently change any bulb at the rear if yes recheck if it the right brake light bulb 1157
u need to do a dignostic for the d4 light and it will lead u to the problem

Oct 05, 2009 | 1992 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...