Question about Cars & Trucks

Open Question

1966 chevelle brake line diagram - Cars & Trucks

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 4336 Answers

SOURCE: need drum brake diagram for 67 chevelle

Look here: http://auto.howstuffworks.com/auto-parts/brakes/brake-types/drum-brake1.htm

OR google it. Remember the smaller shoe goes in the front.

Doc

Posted on Sep 19, 2009

  • 396 Answers

SOURCE: HOW DO I INSTALL A ONE PIECE FUEL LINE ON A 1966

Thats a fun one. Had to do it on a 68 camaro. Basically from the middle of the car fish the back end over the axle until you can start the front towards the engines fuel pump. You should have gotten new retaining clips that snap or screw into the frame rails. The brake line is just as much fun.

Posted on Feb 01, 2010

  • 14 Answers

SOURCE: Wiring diagrams for ma 1966 chevelle

You can buy it here http://www.autorepairmanuals.biz/site/573683/product/ST72

Posted on Apr 04, 2010

  • 880 Answers

SOURCE: how to install clock in chevelle 1966

Replacements differ from one supplier to another. Get the name, etc. off the clock and contact them. I had to do the same thing for a '69 Corvette replacement clock.

Posted on May 02, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1978 chevelle wiring diagram


Try your local library to see if they have a set of repair manuals. Some brands of manuals are: "Chilton's", "Motor's", and "Haynes".
You can also try a local car parts store, but often they may not have repair manuals that old.
Also, look around or advertise in your local "Thrifty Nickle" paper to see if anyone has a '78 Chevelle you could look at and record the wiring diagram.
God bless your efforts.

Sep 08, 2016 | Chevrolet Cars & Trucks

1 Answer

Disc brakes, front


Could be air in brake lines. You don't say if the brakes are power but if they are, have you also changed the master cylinder and brake booster? If so, the plunger from the brake pedal to booster may be need adjusting. Hope this helps

Mar 14, 2014 | Cars & Trucks

1 Answer

Carburetor vacuum diagram


The flexible brake hoses that screw into the calipers are the most neglected part of most brake systems, along with dirty flluid. The flex hoses are probably swollen inside and holding pressure on the calipers. Remove the flex brake hoses and try to blow through them. If you cannot or it is very difficult the hoses are bad.At a minimum I recommend replacing hoses on both sides. As for stuck pistons, try collapsing the calipers. If the pistons won't retract then replace the calipers too.

Mar 14, 2014 | Cars & Trucks

1 Answer

Im looking for a spark plug wirng diagram for a 1966 corette 427


1966 - 1969 with 4 Barrel Carb (L36)
(Low Compression Model)
Max Brake Horsepower - 390 @ 5200 rpm
Max Torque - 470 @ 3600 rpm
Stroke - 3.76
Bore - 4.251
Compression - 10.25
Firing Order - 18436572

1966 with 4 Barrel Carb (L72)
(High Compression Model)
Max Brake Horsepower - 425 @ 5600 rpm
Max Torque - 460 @ 4000 rpm
Stroke - 3.76
Bore - 4.251
Compression - 11.0
Firing Order - 18436572


zjlimited_1418.jpg

283, 327, 396, 409 and 427 CID Engine 1965-1966
Firing Order 1-8-4-3-6-5-7-2


zjlimited_1417.jpg

350 CID Engine 1969-1974 Corvette, 427 CID Engine 1969 Corvette
Firing Order 1-8-4-3-6-5-7-2


Hope this helps (remember to rate this answer)

Jun 15, 2011 | Chevrolet Corvette Cars & Trucks

1 Answer

How to install clock in chevelle 1966


Replacements differ from one supplier to another. Get the name, etc. off the clock and contact them. I had to do the same thing for a '69 Corvette replacement clock.

May 02, 2010 | 1965 Chevrolet Corvette

1 Answer

Drum brakes causing intermittent grinding noise


Sounds like one of the springs that hold the rear brakes in place broke. Jack her up, pop off the tire, remove the drum and take a look. If you need to see what a good one looks like, look on the other side.

This is not a very common problem, but I saw it last year on a 69 chevelle.

Good Luck and thanks for using FixYa!!

Mar 26, 2010 | 1966 Ford Mustang

1 Answer

HOW DO I INSTALL A ONE PIECE FUEL LINE ON A 1966 CHEVY CHEVELLE


Thats a fun one. Had to do it on a 68 camaro. Basically from the middle of the car fish the back end over the axle until you can start the front towards the engines fuel pump. You should have gotten new retaining clips that snap or screw into the frame rails. The brake line is just as much fun.

Feb 01, 2010 | Chevrolet Chevy Cars & Trucks

1 Answer

Wiring diagram


Here is a complete group of diagrams. This is a great website.
http://www.ht67.com/mustang_el.htm#1966

Apr 02, 2009 | 1966 Ford Mustang

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...