How to change CAmshaft seal on 96 Hyundai Accent SOHC
1.
Install the camshaft after lubricating the journal of the camshaft with engine oil.
2.
Install the camshaft bearing caps.
3.
Install the ignition coil.
4.
Install the rocker arm and rocker arm shaft.
Refer to "Rocker Arms and Rocker Arm Shafts" section.
5.
Using special tools, Camshaft Oil Seal Installer (09221-21000), press fit the camshaft oil seal. Be sure to apply engine oil to the external surface of the oil seal.
Insert the oil seal along the camshaft front end and install by driving the installer with a hammer until the oil seal is pulley seated.
6.
Install the camshaft sprocket and tighten the bolts toChanging Camshaft seal - 2cbbe98.jpgied torque.
1,060 views
Usually answered in minutes!
×