Question about 2005 Nissan Pathfinder
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
bank 1 refers to the side of the engine that #1 cylinder is on , and sensor 2 refers to downstream , after the catalytic converter. , this link shows bank 1 on a 2001 nissan maxima V6 being on the firewall side . if you had a 4 cylinder it would be downstream after the catalytic converter .
Posted on Jan 04, 2009
jorgeva: on the driver's side to gain access, you must remove the air cleaner assembly. At that point, you can see the back of the light which has a plastic cap. Rotate this "counter clockwise" and you can pull it back from the back of the lamp housing. From there you will see how the bulb it self is plugged in, which is obvious. Unplug it. There is a "spring "like latch retainer to hold the bulb in place. Unlatch it, remove the bulb and install the new bulb.
CAUTION!!!!!!! DO NOT TOUCH THE GLASS AREA OF THE NEW BULB! Only handle the rear section. Reassemble in the reverse order.
The right side will require the removal of the windshield washer tank.
I trust this will have answered your question. If you would, let me or FIXYA know if I have solved your problem......
Posted on Apr 18, 2009
there are many air bag sensors heres a diagram of them and where they are located, this lists all the air bag system, i circled the sensors, they are listed in the area of the car. front is front of car and so on. hope this helps.
Posted on Feb 18, 2010
There are two speed sensors one is called a revolution sensor that is located on the case of the transmission. You can take the driver side wheel off and see the sensor on the top of the case of the transmission. A 10mm bolt is holding it in. Easy fix
Posted on Jun 17, 2010
Tips for a great answer:
Apr 10, 2017 | 2005 Nissan Maxima
Feb 05, 2016 | Nissan Cars & Trucks
May 01, 2014 | 2005 Nissan Altima 2.5
Dec 27, 2013 | 2005 Nissan Maxima SE
Nov 06, 2011 | 1996 Nissan Maxima
May 22, 2017 | 2004 Nissan Maxima
Feb 21, 2011 | 2005 Nissan Pathfinder
May 09, 2010 | 1996 Nissan Maxima
Apr 01, 2009 | 2000 Nissan Maxima
41 people viewed this question
Usually answered in minutes!