The dash lights are on the same circuit as the tail lights (or running lights) look in the fuse box and look for the fuse location labeled "tail lights".
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
With what info you've given,it would not have been the light switch or the rheostat for changing dash light brighting.Since both the dash lights and running lights are not working,first thing I'd have done is replace the fuse,since both are o the same fuse.Kinda like when my Toyota wipers would stop,the overdrive stopped working too.Both were on the same fuse.Replace the fuse and good to go.I carry fuses with me.
Take a test light and check all fuses.Also dash lights usually have a dimmer which could be turned off or defective.Usually if tail lights work,dash lights should as they are usually on the same fuse.
Thanks for choosing FixYa and welcome. Try changing your dash fuse. It may be marked as dash cluster. This fuse controls all the lights on the dash. Use your fuse box diagram to find the exact location of the fuse. If you have a question, just let me know.
Get a test light,and ground the clip,put the tip of the test light on the dash light fuse.Turn the knob to dim,and brighten the dash lights,see if the test light reacts with the dimmer switch.If it does not,then there is a wire jumped to by pass the dash lights somewhere.If the test light dims,and brightens,then there is a wire of going to the dash,or bad connection where the harness clips into the dash.
tray to check fuse and relay. If both are okay. you can change the light bulb in dash board. Just take out the dash board, remove and replace the bulbs. Make sure fuse is okay. Is the signal light works in the dash board?. Let me know
×