Question about Cars & Trucks

Open Question

Lincoln towncar codes B1318 Year 2000 - Cars & Trucks

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad
crayzeetrayn
  • 837 Answers

SOURCE: REPLACE HEADLIGHT ASSEMBLY IN 2000 LINCOLN TOWNCAR

Open the hood and make sure the car and the lights are off.
Remove the plastic protective cover.There are 3 knobs,turn halfway and pull.Put aside and out of the way.
Remove the three pins that are holding the light assembly in place.These are flat rods with a little bend at the end.
Twist and un-plug the lights,now you can remove the whole lens.
The light bulbs can also be removed and replaced from this point.
Make sure all the bulbs are working before you put it back together.

Posted on Mar 13, 2009

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1995 lincoln towncar air bag trouble: How do I reset system after code 12 repair. showing code 52 now.


Are you sure it's a code 52? I'm not seeing a 52 in the code index. Btw, code 12 is that the system passed it's automatic test. You could continue the chase to fix the air, but on a 20 year old car, it maybe a good idea to do an air suspension conversion on your Town Car and be done with it forever. The Best Lincoln Town Car Air Suspension Conversions 90 97

Apr 14, 2015 | 1995 Lincoln Town Car

1 Answer

Code came up on mercury grand marques 2000 it was b13,18 what does that mean just changed fuel pump and manfoild intake switched fuel and ac relay that was not problem got new battery also sill all charge...


B1318 Battery Voltage Low Air suspension module REFER to Section 414-00 . B1318 Battery Voltage Low LCM REFER to Section 414-00 . B1318 Battery Voltage Low NGVM REFER to Section 414-00 . B1318 Battery Voltage Low RCM REFER to Section 414-00 .
Control module problem , your best bet , take it to a qualified repair shop.

Dec 26, 2017 | 2000 Mercury Grand Marquis

1 Answer

Where is the heater coil on a 2000 lincoln towncar


DO YOU MEAN HEATER CORE if so it is in the havac box under the dash

Mar 26, 2012 | 2000 Lincoln Town Car

1 Answer

How do you reset the radio in a 1989 lincoln towncar?


Could be wrong, but I called my Lincoln Dealer a few months
ago, to help someone here & was told that you do not need radio codes
until you get past 2000 & then not on all vehicles

Sep 21, 2011 | 1989 Lincoln Town Car

3 Answers

2000 lincoln towncar


Check the fuel pump shut off switch that is located in the trunk by the left hinge its in the owners manual also.

Apr 05, 2010 | 2000 Lincoln Town Car

1 Answer

Check engine light stays on...code shows sensor on catalyic conv


i do not know the best thing to do is stop by your local lincoln dealership in the parts department and they be able to print you off pictures and diagrams showing you where it is located if you would please get back in touch with me and let me know thank you very much Michigan Man.

Dec 27, 2009 | 2000 Lincoln Town Car

1 Answer

I need the serpintiine belt diagram for a 2000 lincoln town car


Here you go... 2000 Lincoln Towncar belt routing diagram.

1b31ff9.jpg

Oct 26, 2009 | 2000 Lincoln Town Car

1 Answer

REPLACE HEADLIGHT ASSEMBLY IN 2000 LINCOLN TOWNCAR


Open the hood and make sure the car and the lights are off.
Remove the plastic protective cover.There are 3 knobs,turn halfway and pull.Put aside and out of the way.
Remove the three pins that are holding the light assembly in place.These are flat rods with a little bend at the end.
Twist and un-plug the lights,now you can remove the whole lens.
The light bulbs can also be removed and replaced from this point.
Make sure all the bulbs are working before you put it back together.

Mar 13, 2009 | 2000 Lincoln Town Car

1 Answer

Trouble codes


on my 86 lincoln towncar yhats a limo,i was told by a lincoln shop forman that that year doesnt tell you any thing about the condition of the car it has a tier 3 computer that was a experment model that was only used one year.you would be better off taking it to a shop with a good scope to check out your car.

Oct 06, 2008 | 1986 Lincoln Town Car

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14405 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...