Question about 2001 Toyota Sienna
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You idle air control valve should be located on the throttle body. Here is a link to a picture of it so you can see what you are looking for: http://www.autozone.com/autozone/catalog/parts/partsShelf.jsp?categoryDisplayName=Engine+Management&fromType=parts&fromString=search&parentId=cat30067¤tPage=1&filterByKeyWord=IAC&isSearchByPartNumber=false&navValue=15900207&categoryNValue=15999999&fromWhere=&itemId=prod61721&displayName=Idle+Air+Control+Valve&searchText=IAC Let me know if you have any other questions. Thanks for rating my response and for using FixYa!
Posted on May 28, 2009
It's under the intake manifold...oh joy
Posted on Sep 19, 2009
Testimonial: "you are a nice guy. i'm so gratefull you have this in the networth. thanks."
Dealer Item ` $200
Junk Yard ~ $100
https://toyotapartscenter.net/toyotasiennaparts.html?gclid=CPX5u8HUlZ4CFSn6agod6Ae1oQ sells them for $167.17 + shipping and tax
I recommend a pull, light tap and reconnect, recheck B4 buying. Also, shop manual has proper test procedure, Pages BE16-17
Posted on Nov 18, 2009
1. Remove the dash around radio (just clips)
2. Remove 2 screws pointing up . (You do not need to remove screws which are parallel to the floor)
3. Remove screw pointing up on the bottom of the dashboard on left side of the driver (near left leg).
4. Remove 2 screws pointing up in the instrument cluster area.
5. Put car in 1st gear and gently remove black plastic surrounding instruments (it will have ait vents, so slide it carefully out not to damage foam insulation on air ducts; start on the bottom hear steering column) ; unplug connectors to clock and emergency flashers.
6. Remove 2 screws, now exposed, near instrument area, holding dashboard. (that was what I spent most time on, I didn't know about this screws.
7. Now gently remove (or move up) dashboard (around instrument cluster and heating controls.) Start next to ignition (careful not to damage the bulb next to the ignition.
Since you only need to get to the heating controls block, I only move up the dashboard next to it.
8. Remove 2 screws that hold the heating control and slide heating control out . This step is unnecessary If you totally removed the dashboard.
9. Pull out lever controls for fan speed, zone and temp
10. Use the screwdriver (flat) to pry 2 plastic tabs on top and on the bottom of heating control so black cover can be remover.
11. You did it! two bulbs are going to be under the cover.
Posted on Aug 02, 2010
Tips for a great answer:
Jan 20, 2015 | 2001 Toyota Sienna
Aug 19, 2014 | Cars & Trucks
Jan 10, 2011 | 2001 Toyota Sienna
Jun 01, 2010 | 2001 Toyota Sienna
To start, the noun "''rear latch switch'' is incorrect. It's actually called "Slide Door Lock". It's located on page BO-20 of the Toyota Repair Manual for the 2001 Sienna. There are two door locks on one sliding door. One in the front and one in the rear. Obviously, you want the one in the rear. The location for the "Slide Door Lock" (which also contains an electric switch) is in the rear of the sliding door located mid way up door. You can see (sliding door opened from the back) it without dissembling the door. And, the lock is made up of plastic (dirty white in color).
Mar 06, 2010 | 2001 Toyota Sienna
Mar 06, 2010 | 2001 Toyota Sienna
Oct 20, 2009 | 2002 Toyota Sienna
Apr 27, 2009 | 2001 Toyota Sienna
34 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: