Question about GMC Sierra 2500

1 Answer

Power steering assembly diagram on 2002 Sierra 5.3L if the seal can be changed out

Canthe seal or gasket on the power steering box be changed out or does the pump need to be replaced

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 113 Answers

The seal can be changed. You will need to remove pitman arm and remove clip that holds in pitman arm seals. Once clip is removed put a bucket under it and start truck, turn and hold wheel all the way one way and seal will pop out. When installing new one first put some Vaseline on it so you don't tear it on the install. This is also a good time to change your fluid

Posted on Nov 19, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 11 Answers

SOURCE: power steering pump

ive nvr heard of it like that but coolant can get into your engine and that can be your problem if the car dose not want to turn it is your main belt or a pully can be lose

Posted on Jul 28, 2008

SOURCE: i need a 2002 ford ranger fuse box diagram and afuel pump relay switch diagram

Hi

go to www.motorcraftservice.com then click on the owner guide and put in your truck information
then choose the 1st owner manual printing and should be between page # 184 to 200.

Good luck and I hope this will awnser your question.

Posted on Nov 08, 2008

emissionwiz
  • 76846 Answers

SOURCE: power steering gear box

The seals can be changed, they sell a kit, but u will have to remove the box to do that.

Posted on Nov 24, 2008

  • 12 Answers

SOURCE: removal of power steering pump on 1998 GMC Sierra 1500

you need a power steering pump puller the rest is simple any trouble let me know

Posted on Dec 24, 2008

michigan man
  • 3533 Answers

SOURCE: Serpentine belt replacement

try autozone.com to see if they have your car listed for diagrams pictures and step by step instructions if your car is not listed then try your local library they have all the car manuals and even copy them for you

Posted on Mar 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 ford focus power steering pump parts assembly diagram


You don't want to rebuild the pump. Get one for around $45. Yeah you may have saved $20 by getting the seal kit. But if the fiberglass vanes inside are worn, you just wasted your money. It will do the same thing, whine or hard steering.

Jul 25, 2015 | 2001 Ford Focus

1 Answer

Bleed power steering/brake unit 2002 GMC Sierra 3500


The slash that you placed between the words steering/brake have me concerned. I certainly hope you did not think that these two systems are co-joined? The power steering system is a hydraulic system completely separate and isolated from the brake system. They also use two completely different types of fluid. Putting brake fluid in the power steering system would destroy it just as putting power steering fluid in the brake master cylinder will destroy it. The type(s) of rubber used in the seals for each of these systems demands they use their own fluid. Any cross-contamination will require a complete draining, cleaning, and replacement of ALL rubber components and seals. This would include the power steering pump and rack for the power steering system, and for the brake system the master cylinder, all calipers and wheel cylinder as well as the proportioning valve. If there is an ABS unit, it will need serviced as well.

Nov 15, 2013 | 2002 GMC Sierra

1 Answer

2002 Cadillac Escalade is leaking power steering fluid from what appears to be a weep hole on the bottom of the hydraulic brake booster. Does the entire booster assembly need be replaced or is there a...


are you talking about brake fluid --power steering lines do not connect to the brake system --- also their is no weep hole at the bottom of the brake booster ---can you please clarify what is leaking and where --power steering lines from pump to radiator to steering rack ----brake booster mounted to fire wall with brake master cylinder bolted to front

Oct 05, 2011 | 2002 Cadillac Escalade

1 Answer

I need an Illustrated Parts Break down for a 1989 GMC Sierra 1500. 350 w/ PS/PB loaded. Steering column Removal Repair or Replace


Hi.

Below you get all the parts breakdown for GMC Sierra 1500, including steering column assembly:

1500 SIERRA

Here diagrams for all 1989 GMC trucks.

If you need to take apart the steering column you will also need wiring. below the color codes and wiring tips:

GMC SIERRA 1988-2005 VEHICLE WIRING

Regards.

Ginko

Aug 31, 2011 | GMC C1500 Cars & Trucks

2 Answers

Need diagram of installation of power steering bracket on a 1995 gmc 1500 with a 5.0


I suggest visit autozone.com (free register) and check all the information about this subject in there.

Good luck.

Apr 01, 2010 | 1995 GMC Sierra C1500

1 Answer

How do I replace the Knock Sensors on a 2002 GMC Sierra 2500HD 6.0L V8 Gas engine? How do I change the serpentine and AC belts? Last but not least how to replace the drivers front differential seal?


remove the intake manifold ,remove radiator ,remove radiator intake and outake housing, remove fan ,remove all belts: power steering, alternator and if you have a/c, remove harmonic balancer ,remove timing belt covers, remove timing belt remove intake housinng once you have remove all the above, your freaken engine will look naked, you can see the location of the knock sensor is locate in the engine valley hope this helps u might wnat to google knock sensor so u knoe what it looks like

Feb 19, 2010 | 2002 GMC Sierra 2500HD

2 Answers

02 Stratus oil leaks when engine off (not when running)


Leaks oil from where ...from front seal ...valve cover gaskets ....rear seal ...oil pan ..if you find out where ..change the gasket from where it is leaking from

Jan 02, 2010 | 2002 Dodge Stratus

1 Answer

Diagram for for power steering pump high side


what year? what engine?

Installation
  1. NOTE: If a new power steering pump is to be installed, the unions that are supplied fitted to the pump should be removed and saved for future use.
    Using the special tool, install a new O-ring seal.
    1. Push the new O-ring seal onto the special tool.
    1. Locate the tool over the union and ease the O-ring seal onto the union.
8675655.gif

Oct 07, 2009 | Mercury Cougar Cars & Trucks

1 Answer

GMC 350 V8 POWER STEERING DIAGRAM


The high pressure and low pressure hoses are different sizes at the gear box. And the low pressure /return hose is usually rubber with a clamp at the back off the pump.

Mar 03, 2009 | 1993 GMC Sierra K1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...