Question about Cars & Trucks

Open Question

Lost money behind glove box . How to remove glove box? 2008 ford escape.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
Brian032472
  • 150 Answers

SOURCE: How to change the HEPA cabin filter in a 2006 Honda Civic

Open the glove box and there are push out tabs on the left and right side pop them out. Now watch it because you are about to dump the contents of your glove box on the floor. let the box hang freely from the lower hinge and look in the back. You will see a white panel that pulls out the panel has a tray attached with the filter element in it remove old element and replace with new 20ish bucks at the parts store lots more at the dealer. re-install filter tray and reverse your removal steps to re-install. Recommended approx 15k or annually

Posted on Nov 04, 2008

Ad
  • 2 Answers

SOURCE: Cabin air filter location 2003 F250 6.0L crew cab pickup

hey jack open the back door and look up top where the hinges are and that should be the one for the back and the front if it is not up under the hood where the wipers are then check up under the dash

Posted on Apr 04, 2009

cadman000
  • 607 Answers

SOURCE: 1992 Cadillac Coupe Deville blower fan runs all the time

The BLOWER MODULE is located on the A/C EVAPORATOR housing located UNDER THE HOOD passenger side firewall. Has 2 electrical connectors. Mounted with 4 screw bolts.Hope this helps

Posted on May 21, 2009

Mr BrokRench
  • 1623 Answers

SOURCE: How to I replace the cabin air filter in my 2008 MC C300

Remove the three torx screws using a torx-20 screwdriver...pull back the padding in the footwell...there is tab holding the left part of the plastic piece, use a flat-head screwdriver to pop it out...you may need to disconnect the light connector, and the cigarette lighter connection.. Once the plastic piece is out, you will see a large white box, the filter is inside this box. There are two yellow clips that need to be slided to the left/right. The box then pops out from below and the folded-filter will fall right out
Good luck..i hope this helps..please rate me a fixya.

Posted on Aug 02, 2009

  • 1 Answer

SOURCE: MB 2008 C300 cabin air filter where

under hood,over battery, when facing windsheild top left by firewall

Posted on Aug 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Fuel pump inertia switch location 2003 ford escape


possibly behind one of the kick panels . drivers or passengers side

Dec 29, 2016 | Ford Cars & Trucks

3 Answers

How do i find nissan rogue blower motor


Behind glove box , Remove glove box first

Mar 05, 2015 | 2010 Nissan Rogue

2 Answers

Where is the cabin air filter on a 2005 dodge durang slt I heard behind the glove box and I removed the glove box there nothing


I have a 2008 Grand Caravan and it states that the cabin air filter is behind the glove compartment, so like you I remove the glove box and nothing. I called the dealer and was told that on some models even though they say there is a cabin air filter in actuallity there is none

Good luck,

Marty

Jul 19, 2014 | Cars & Trucks

1 Answer

Where is Blower resister


If you start losing your blower fan speeds, it's probably the blower resistor.
I changed mine on my 2012 Escape, and saved some instructions and pictures at:
http://www.escape-city.com/viewtopic.php?f=28&t=30645&p=390762#p390762
It's basically behind the glove box. Here is a picture of the
old resistor and the part number I used.


blower-resister-d2o1mfgeoz3uqn0tk1cel01q-5-0.jpg

Jun 28, 2014 | 2011 Ford Escape

1 Answer

WHERE IS THE INSIDE CABIN AIR FILTER ON 2008 FORD EDGE LIMITED


The cabin air filter is located behind the glove box. Open it then empty all contents. Grab both sides inside the box and push them inward. The glove box will then drop out further. On the left side is a catch cable. Slide that down and pull it out. The box should then just pull out. The cover for the filter is rectangular and gray or black color. On the left side push the tab toward the passenger door and pull toward you. You will either find nothing or a screen. Discard the screen and insert the new filter.
2011 Ford Edge cabin air filter removal and replacement

Feb 02, 2013 | 2008 Ford Edge SEL

1 Answer

Where is the cabin filter located on my 2006 Ford Escape? I use to have a kick *** AC, but lately it needs to be turned up to really work. Someone said that I may need a new cabin filter. Where is this...


The 2006 ord escape has two locations for a cabin air filter, they had a change up year modification

first and most popular location is under passenger side of the wiper cowl: To remove the cowl, you have to first pop the cap on the passenger side wiper arm and remove the nut usually a 13mm nut so you can remove the wiper arm, once arm is off you can remove the screws retiaining the plastic wiper cowl, once cowl is removed you will see air box on the left where usually jam up with leaves or dust etc..replacement is just removing out and placing new one in the place where the old one was

2nd location will be behind the glove box, you need to squeeze the sides of the glove box to allow it to open and swing down. Once glove box down and out of the way you will look directly back and see a cover retained with small 7mm screws, remove them and behind you will find you filter which slides in and out.


Good luck and any more questions feel free to ask

Thanks Jay

Jun 22, 2011 | 2006 Ford Escape

1 Answer

Interior fan not blowing on first two settings ... works fine on 3rd & 4th


It sounds to me like your problem Is a bad "blower motor resistor".
It is located behind the glove box on top of the evaporator box!
Good luck!

Jan 21, 2011 | 2008 Ford Escape Hybrid

1 Answer

Sounds like rear wiper fluid leaking behind and above glove box, "any ideas?"


If it sounds like it is coming from behind the glove box then that would be your heatercore leaking.

Dec 26, 2010 | 2005 Ford Escape

1 Answer

CANNOT FIND THE COMPUTURE IN THE1996 FORD TORUS


oop's!! LOL did ya look under the passengers side behind the glove box? or side panel below the glove box?

Jan 15, 2010 | 2005 Ford Escape

2 Answers

2008 honda pilot cabin air filter


This solution pertains to a 2008 Honda Pilot...To replace the cabin air filter which is located on the passenger side of the vehicle behind the glove box: Open glove box and remove stored items...while sitting in the passenger seat, pull towards you on each of the two clips on the left and right side of the glove box...this will cause them to become loose and the glove box will tip out completely exposing the inside of the dashboard. (Alternately...carefully pull towards you on the top center of the glove box which will cause the left and right side stops to pull away from the edges and allow the glove box to tip out) Here it gets tricky...the box holding the cartridge for the cabin air filter is the large black box on the left side behind the glove box The filter fits in a removable tray vertically inside that box. A pressure clip at the top of the box allows the vertical cover to be removed exposing the tray with the Cabin air filter... BUT!!! There is a plastic bar an inch or so high which has been placed there by the manufacturer to prevent most from changing the filter without the service department being involved. This bar must be cut with a sharp sheetrock knife or hacksaw and discarded, (it will not be reinstalled). Then there is a flat metal bar behind the plastic bar that can be removed using an 8mm socket and a phillips screwdriver. There are 2 8mm screws and one phillips head screw on each side that must be removed in order to remove the metal bar. THEN you can remove the cover to the cabin air filter box, pull out the tray with the filter (note how the filter is in the box so the new one can be placed the same way) reinsert the tray with the new filter and replace the tray cover. All other steps to finish the job are obvious as everything is the reverse. Actually the whole process is a lot of trouble and unless you are determined to change the filter I would recommend not doing it.

Aug 24, 2009 | 2008 Honda Pilot

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...