Question about 2000 Cadillac DeVille

Open Question

Jacked up 2000 cadilac deville and now rear suspension is stiff

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 65 Answers

SOURCE: I need my radio code for my 2000 cadilac deville.

Now when you say it will not come on like nothing is there/blank screen? If that is the case then you have a power/bad radio problem. check the fuse first.


Now if it comes on and is askign for a code then sorry to say you will need to call a dealer or have someone that works at a dealer get that for you. Most dealers are pretty good about giving it to you. just write down your VIN number and call the service of one. If they will not give it call another dealer. I had to do this when I bought my Saab. First dealer would not give it and wanted money. The 2nd gave it to me and I ended up buying my parts from them for that very reason.

Posted on Mar 27, 2009

Ad
emissionwiz
  • 76630 Answers

SOURCE: what odes it mean when 1998 cadilac deville

IT MEANS THAT A FAULT HAS OCCURED IN THE SYSTEM AND THE SYSTEM HAS BEEN DISABLED, TO FIND THE FAULT YOU MUST HAVE THE DEALER TEST IT FOR THE TROUBLE CODE THAT IS STORED WHEN THE LIGHT STAYS ON.

Posted on Jun 24, 2009

  • 18 Answers

SOURCE: Low rear suspension on my 1999 Cadillac DeVille

Do you hear your compressor running? It may be that it is getting tired and ready to burn out on you. I replaced the compressor twice on my Deville before I found that there were so many holes and nicks in the air bags and it was going to cost me almost $1500 to fix the whole system. I went online and found Strutmasters. I got a non air conversion kit for my car and love it. Saved me money and headache.

Posted on Jul 12, 2010

duane_wong
  • 6826 Answers

SOURCE: the rear of the car sets higher than the front,

There's a level sensor in the back of most cars that have air ride suspension such as Cadillac Devilles.

If there is plenty of pressure, it's probably not a leaky air shock aborber nor is it a bad air pump under the hood.

Posted on Nov 11, 2010

em1cl
  • 463 Answers

SOURCE: how to get the check

You may have already done this, but, first make sure your coolant level is up to, but NOT over, the full line on the coolant reservior, ( plastic bottle ), if the level is good you may have to replace the coolant sensor.

I hope this helps.

Posted on Jan 28, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Rear air suspension is VERY stiff since changing right rear tire


Couple questions.
why was the tire in need of being replaced?
was there any damage or impact to the car?
when was the last time it was jacked up or lifted?

the first things that come to mind is a bent or hyper extended shock.
second thing that comes to mind is maybe somebody jacked it up one a suspension part and bent it

Jan 02, 2016 | 2002 Buick LeSabre

2 Answers

2000 Cadillac Deville....My interior lights are not working checked all the fuses. What could be wrong?


If it's just one door, check the door switch.
If the lights do not work regardless of which door is opened, check the "INT LP" relay in the rear fuse block (under rear seat). Unfortunately, this relay is controlled by the Rear Integration Module (RIM) based on input signals from the doors etc. If the relay fuse and relay are ok, then you may have to replace the RIM - check the car error codes (DTCs) first to make sure.

May 24, 2015 | 2000 Cadillac DeVille

1 Answer

How do I remove the drivers seat in a 2000 Cadilac ?


I'm not positive about the DeVille, but I've removed seats from lots of other vehicles, and some of that may translate over here.

There should be four bolts (studs, really) going down through the floor from the seat mount frame. You should be able to find the four nuts under the vehicle's floor pan, after you jack up the driver's side and put jack stands under it (if it falls, it WILL crush you to death). Loosen those four nuts but don't remove them.

Now back inside, feel underneath the seat - find all the electrical connectors. Unplug them ALL. Doublecheck, triplecheck, make sure you get them ALL.

NOW you can remove the four nuts underneath the vehicle, tip the seat rearward to verify that you got ALL the electrical connectors, and remove it. It's HEAVY.

Jul 25, 2014 | 2000 Cadillac DeVille

1 Answer

The back end of my car is up high and suspension feels stiff?


there may be a problem with the rear height sensor

Nov 19, 2010 | 2001 Cadillac DeVille

1 Answer

The rear of the car sets higher than the front, suspension is stiff in the back to. Is there a suspension control system that is not working


There's a level sensor in the back of most cars that have air ride suspension such as Cadillac Devilles.

If there is plenty of pressure, it's probably not a leaky air shock aborber nor is it a bad air pump under the hood.

Nov 11, 2010 | 1994 Cadillac DeVille

1 Answer

Need new struts on rear, Would like to replace with air shocks. Any suggestions on how I would do this?


Shock Absorber -The rear already has air shocks on the 1999 Cadillac Deville: REMOVAL & INSTALLATION Rear
  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2. Remove or disconnect the following:
    • Rear wheel Fig. 1: Exploded view of the rear shock absorber mounting 9300vg06.gif

    • Negative battery cable
    • Shock absorber electrical connector from the rear suspension support, If equipped
  3. Support the lower control arm with a jack to relieve the tension on the shock absorber.
  4. Remove or disconnect the following:
    • Lower shock absorber mounting bolt and nut
    • Upper mounting nut, retainer, and insulator
    • Shock absorber compress by hand and remove through the upper control arm
    To install:
  5. Position the top of the shock absorber with the insulator attached into the suspension support.
  6. Install or connect the following:
    • Upper shock insulator, retainer and nut. Torque the nut to 55 ft. lbs. (74 Nm).
    • Shock absorber lower mounting nut/bolt. Torque the nut to 75 ft. lbs. (102 Nm).
    • Shock absorber electrical connector to the rear suspension support, if equipped
    • Rear wheel
    • Negative battery cable
prev.gif next.gif

Jul 29, 2010 | 1999 Cadillac DeVille

1 Answer

What problems exist to change the oil pan gasket in a 1988 Cadilac Deville?


the cross member blocks access to the pan so u cant drop it to replace the gasket if u undo motor mounts and and tranny mount may jack engine far enough to drop pan to replace gasket

Jun 01, 2010 | 1988 Cadillac Sedan DeVille

2 Answers

Rear suspension noise


you should have rear struts with a leveling system and also strut mounts most likey its your strut mounts

Jul 21, 2008 | 1999 Cadillac DeVille

Not finding what you are looking for?
2000 Cadillac DeVille Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...