Question about 2003 Jeep Liberty

1 Answer

Code reader reads 1283 manufacturer control

What exactly is a manufacturer control

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Jeep Master
  • 20,706 Answers

Must be an OBD2 car, p1283 (your reader or autozoned readers)
P0 is USA federal standard codes.
P1 are factory (this car, this makers ) private codes.
what engine, never post , with no engine options,
if you dont kown what you are driving, then do a vin search on line
or post vin, or look under hood of car (USA) look up, see white sticker
there, it does show what engine is in the car.

2.4L or 3.7L engines. or diesel.

my online source, shows no 1283 only 1281,
but no engine stated. if diesel it has its own set of jeep codes, very unique.

first find out what you are driving.
the FSM explaines, the P0, P1 and P2 code reasons.

Posted on Nov 24, 2013


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What code reader do I need to read a problem with the AWD on a 2000 GMC safari

The generic obd2 code reader is good for reading codes of faults relating only to faults affecting or potentially affecting exhaust gas emissions.

For driveline, braking and body faults an altogether more expensive and professional code reader or preferably a code reader/scanner (with bidirectional software if possible) and loaded with manufacturer dedicated software...

Software can be bought or obtained and loaded onto a standard laptop, though without an obd interface and connecting lead it is still useless. Proper licenced software is as expensive as some of the professional tools.

I suggest you spend a little while leafing through a professional tool catalogue...

Mar 07, 2018 | GMC Cars & Trucks

1 Answer

Check engine light flashing running ruff

Go local Autozone and ask to read OBD error code for free.
or buy any cheap code reader/scanner for now and future use ($30 to $1000. $30 is enough)
It's called "OBD scanner" or "OBD code reader".

Other than that, nobody can tell you what was/is wrong with your car.
BTW, OBD error codes are different by manufacture and year/model.
after you buy code reader, google it with your year/make/model.
or Autozone reader may tell you in plain English (other than P0125, B0432, etc)

Dec 02, 2015 | Cars & Trucks

1 Answer

Fix cruise control

There is a 2amp cruise switch fuse, instrument panel fuse box. Your owners manual should show fuse box info.

There are many trouble codes for the cruise control system, check for applicable codes. To check codes, yourself, at the least you need an obd2 code reader that will read manufacturer specific codes as well as po codes. Some of the national brand autostores will check codes for free.

Just curious, do your brake lites work ok?

Jan 04, 2015 | 2008 Pontiac Grand Prix

1 Answer

My 2005 Nissan Altima 3.5 is idling at 800 rpm's, and my service engine soon light came on. The code read for a Chrysler? P1283, and Fuel pump module detected an incorrect low idle, low idle select...

Make sure you are looking up the code properly. 1283 for Nissan indicates a lean condition on bank 2. See link below. A vacuum leak is likely, but make sure the new sensor is recalibrated. Did you perform the relearn procedure after replacing the sensor? If not, see the second link below. If you ran the relearn procedure and cleared all codes but 1283 comes back, look for a loose vacuum line or leaky intake manifold gaskets. P1283 Nissan Air Fuel Ratio Sensor 1 Lean Shift Monitoring Bank 2 1998 2012 Nissan Altima Clear Mixture Ratio Self Learning Control Data

Jun 21, 2017 | Cars & Trucks

1 Answer

Can U581 code reader scanner read fault code of Mitsubishi?

all depend of the chip inside. Go to the manufacturer or supplier and get assistance ONLINE via chat .

God bless you

Jun 20, 2013 | Cars & Trucks

1 Answer

206 2001 petrol emlight comes on on jouneys over20 miles no code given on reader but resets ok any ideas thanks deane 20

To begin with, MANY codes cannot be accessed with a generic code reader. The code readers can only access the continuous memory codes. They cannot read manufacturer specific or one trip codes. So just because yoiur generic code reader is not reading any codes, this DOES NOT mean that there are no codes to be read. If the light is on, there are codes. Period! (unless there is a control module fault that must be corrected).

If you want to find out what is going on with your vehicle, the FIRST thing you need to do is to STOP CLEARING THE LIGHT! You are not only turning the light off, but you are also erasing important data that will be needed to properly diagnose the problem.

Get it checked by a trained technician with the proper equipment to access the engine data.

Apr 21, 2012 | Cars & Trucks

1 Answer

My 2001 cherokee will not start. the engine will turn over. the voltage is good but it reads nothing on the gauge, neither will the fuel. after a few seconds the odometer will read "no bus"

Hi, the no BUS is usually a seriuos issue with engine controller communication. Can you check and see what trouble code is stored in the PCM (engine comuter)? This code needs to be retrieved with a code reader available at most auto stores for around $40. If you can give me the code, I can tell you exactly what is wrong and what will be needed to repair your Jeep.

Sep 15, 2011 | 2001 Jeep Cherokee

1 Answer

I have a 2007 Chevy Colbalt LT. It seems like the automatic transmission is not shifting properly and the engine is staying at high rpms. I heard it could be the tcm so i took it to 2 different places to...

Were they pro level scan tools or cheap code readers? Cheap code readers can only read generic powertrain "P" codes P000X to P0800. You need a more expensive scan tool that's capable of reading "enhanced" or "manufacturer specific P1000 tp P3000 and B, C and U codes. However, if it says it can't communicate, that's an indication of a shorted module somewhere on the digital data bus

Dec 27, 2017 | 2007 Chevrolet Cobalt Coupe

1 Answer

I have 2004 Jaguar S-type 3.0L V6-speed automatic. Trouble code B2477 control module. Multi Display / Climate control is to dash. How to repair B2477 control module. Please help me?

sorry but no code number this high in the jaguar codes so i would contact the code reader manufacturer and ask for a definination of what their codes read ,jaguar codes only read up to 1470 with a P in front ,if this problem is what i think it is then its a new panel unit ---OUCH--- expensive

Mar 14, 2011 | 2000 Jaguar S-Type

1 Answer

OBD read p1131 manufacturing control fuel air metering on 94 ford mustang. What does that mean?

think it could mean the mass air flow sensor in the air intake pipe ,but i would test this with a automotive meter and not a code reader to be honest

Mar 05, 2011 | Ford Mustang Cars & Trucks

Not finding what you are looking for?
2003 Jeep Liberty Logo

Related Topics:

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts


Level 3 Expert

80339 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides