Question about Cadillac Cars & Trucks
Try turning the key on and leaving it on for 10 to 15 minutes and it should reset the security system
Posted on Nov 19, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If you have key numbers on the door, you should enter the code, then immediately start the truck. If this does not work contact the dealer for a sequence to reset the alarm.
Posted on Jun 28, 2009
Have you chaged the battery on the remote. And also do you have a valet button under the dash somewhere if you push it for about 15-30 sec. it should reset the alarm. if it fails you might need a whole new alarm system.
Posted on Jun 28, 2009
SOURCE: Hello I have a 2002
Yes there is a bypass. Costs about $200.00. You should be able to put the key close enough to the cylinder to get the security to go off. I don't know what you did to get the cylinder out. but there is a chip mounted to the steering column. once the key is close enough to it it will let the car start. If you broke the chip getting the cylinder out then you have some money to put out to get it running.
Posted on Jul 02, 2011
The late-90's GM Passlock system (e.g. 1997 Malibu, Regal, Impala, etc.) has a part around the ignition tumbler that goes bad and no longer reliably detects the valid key. In that situation, the "Theft System" light will slowly flash and the carburetor is cut off so the engine won't start. The time-out on the system is 10 minutes - you don't have to do anything, you don't have to disconnect the battery, the key can be out of the ignition -- it's just a time delay. After 10 minutes, the light goes out and you can try again (but if the key is again not detected, the light will start flashing again and you have to wait another 10 minutes)
Someone else, who had this problem, told me to remove all other keys from my keyring. The weight of the other keys pulls on the ignition key causing the key to be unreadable. It has been 7 weeks since I have been doing this and have not had a problem
Posted on Sep 10, 2011
Tips for a great answer:
Dec 26, 2015 | Cars & Trucks
Mar 30, 2013 | Cars & Trucks
Jan 02, 2013 | 2003 Chevrolet Malibu
Aug 12, 2012 | 1997 Buick Skylark
Jul 29, 2012 | 2003 Cadillac CTS
Jun 22, 2012 | 2001 Nissan Maxima
Jul 01, 2017 | 2004 Chevrolet TrailBlazer
May 24, 2011 | 1996 Chevrolet Cavalier
May 21, 2011 | 2006 Pontiac Grand Prix
17 people viewed this question
Usually answered in minutes!