Question about 2003 Chrysler PT Cruiser
The headlights will not turn on. The fog lights will not turn on. The turn signals and tail lights work. The fuses have been replaced. The Multifunction Switch has been replaced.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
try looking at the bulbs first,their is a fuse for each side of the lights ---do the front side lights work ??think this is just a coincidence that they are out and you have just noticed it .
Posted on Feb 05, 2009
SOURCE: fog lights staying on
1st most newer car cars have a timer delay that helps light the area you are in for a couple of seconds. You may have had the knob turned all the way up on the turn signal switch. The same thing will happened if this switch is turned all the way up, the interrior light will stay on. Turn the lights on with the switch and see if the fog lights come on, do this without the car running.Trun the lights off,see if the fog lights stay on then go out after a while.if so you have a delay on the fog lights or relay. You may need to replace the relay only. Part $ 15 trace fog light wiring to relay usually under hood away from water sources.......runjoe
Posted on Mar 02, 2009
1.At first take out the foglight's fuse before you battery is dead. (Fog lights stays "ON" even you leave the car).
2.You must replace the Multifunction control switch =(
Here is the photo of problem:
Fog lights are connected to pin 13,14.
Fog light switch is "B". Because the current is many Amps, contact surfaces are heating up.
After that the contact opening "C" is melting (made of plastic) so the fog light stays "ON".
Posted on May 29, 2009
There are 2 possibilities. It is on Power distribution Center (mine was there)
or Fuse Block
Here are the photos:
If you like to fix your fog lights, you must replace malfunction switch. It is a typically PT-Cruiser problem.
Posted on Jun 05, 2009
Tips for a great answer:
Mar 26, 2016 | 2002 Chrysler PT Cruiser
Jan 02, 2016 | 2003 Chrysler PT Cruiser
Jul 19, 2015 | 2004 Chrysler PT Cruiser
Oct 28, 2014 | 2003 Chrysler PT Cruiser
Dec 15, 2012 | 2006 Chrysler PT Cruiser
Aug 16, 2011 | 2006 Chrysler PT Cruiser
Jun 14, 2010 | 2006 Chrysler PT Cruiser
Oct 20, 2009 | 2006 Chrysler PT Cruiser
Jan 30, 2009 | 2002 Chrysler PT Cruiser
Dec 25, 2016 | 2003 Chrysler PT Cruiser
333 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: