Question about 2008 Ford Mondeo 2.0

1 Answer

I have a 2006 Galaxy 1.8tdci How do I check the PCV valve operation?

1.8tdci 100ps

Posted by on

  • 2 more comments 
  • David Kerr
    David Kerr Nov 19, 2013

    on the 1.8tdci the pcv is built into the rocker cover! Therefore not so easy to replace or take apart!

  • mikadot
    mikadot Nov 19, 2013

    If you get a new one in your hand it may give you clues how the old one may come off.

  • Dave Nolan Nov 19, 2013

    Sorry David. I am in Australia and our Mondeo must have a different engine.

  • Dave Nolan Nov 19, 2013

    I have not noticed a PCV that is built in to the rocker cover. As a PCV is a serviceable item it does not make any sense. But that is not hard to believe nowadays :)



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has answered 20 or more questions within one hour.


    An expert who has answered 20 questions.

  • Expert
  • 87 Answers

A Positive Crank Ventilation valve is a very cheap thing....cheaper to replace than repair. Replace with a metal one as the plastic ones get brittle and break drpping a spring and metal disk into the engine. I have not seen this do damage yet but it would not surprise me

Posted on Nov 19, 2013

  • David Kerr
    David Kerr Nov 19, 2013

    on the 1.8tdci the pcv is built into the rocker cover! Therefore not so easy to replace or take apart!



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where is the pcv valve 2006 ford five hundred

It is under the throttle body area and it is hard to get to unless you are doing the plugs and have it out of the way. My Ford dealer quoted $166 to change the plugs P&L. I did them myself. Look up your PVC valve on to see what it looks like.
1. Remove the 4 transaxle roll restrictor brace bolts.
o To install, clean the bolts using a wire brush, apply new threadlocker to the threads and tighten to 55 Nm (41 lb-ft) .
2. Remove the bolt and the transaxle roll restrictor brace.
o To install, clean the bolts using a wire brush, apply new threadlocker to the threads and tighten to 48 Nm (35 lb-ft) .
3. Disconnect the positive crankcase ventilation (PCV) valve tube from the PCV valve.
4. If equipped, disconnect the PCV valve electrical connector.
5. CAUTION: A new PCV valve must be installed if removed from the cam cover. Damage will occur to the locking mechanism on the PCV valve. Rotate the PCV valve counterclockwise to remove from the valve cover.
6. To install, reverse the removal procedure

Jul 14, 2016 | 2006 Ford Five Hundred

1 Answer

Location of the pcv valve on 2006 dodge magnum 2.7

Have you checked the parts store to see if they even list one for that car? Some cars do not have one.

Dec 13, 2014 | 2006 Dodge Magnum

1 Answer

How do I find the PCV valve on 2006 ford f150 xlt

PCV valve is normally located in one of the valve covers and connects to a vacuum source near the fuel intake assembly. Connecting hose is normally about 3/8 inch in diameter.

Sep 11, 2014 | Cars & Trucks

1 Answer

2006 dodge charger pcv valve location


9491.jpg The PCV valve (3) is mounted into the top/right side of the intake manifold (2).

1.The PCV valve (1) is sealed to the intake manifold with two O-rings (2).
2.Remove PCV valve by rotating counter-clockwise 90 degrees until locating tabs (3) have been freed. After tabs have cleared, pull valve straight up from intake manifold.3.After valve is removed, check condition of two valve O-rings (2). __________________

Oct 07, 2010 | 2006 Dodge Charger

1 Answer

I have a 1989 buick lesabre 3.8 and want to change

Remove PCV valve from rocker cover. Run engine at i
dle. Place thumb over open end of PCV valve to
check for vacuum. If there is no vacuum at valve, c
heck for obstruction in manifold port, hoses or PCV
valve. Repair or replace as necessary.

Turn engine off. Remove PCV valve. Shake valve and
listen for rattle of check valve inside. If a clear
rattle is not heard, replace PCV valve.

Visually inspect valve for varnish or deposits whic
h may make PCV valve operation sticky, restricted o
cause incomplete seating of valve. Replace if neces
sary. An engine must be sealed for the PCV system t
function as designed. If leakage, sludging or dilut
ion of oil is noted AND the PCV system is functioni
properly, check engine for cause and repair as requ
ired to insure PCV system will continue to function
properly. An engine operating without any crankcase
ventilation can be damaged so it is important to
replace PCV valve and air cleaner breather at regul
ar intervals (at least every 30,000 miles). Check a
ll hoses
and clamps for failure or deterioration.

Mar 28, 2010 | 1989 Buick LeSabre

1 Answer

2006 trailblazer --- how to adjust idle ----

get computer codes, see if have any codes listed, could have faulty neutral switch computer not detecting in gear, or air by-*** valve, vacuum leaks, check pcv valve,

Feb 09, 2010 | 2006 Chevrolet Trailblazer

1 Answer

Can't locate the pcv valve 2006 mazda 3

it located behind intake manifold, the intake manifold must be removed to get to valve, once you remove intake you will see pcv valve, dumb place for it i know,good luck.

Oct 22, 2009 | 2006 Mazda 3

1 Answer


the pcv valve will be sticking out of the valve cover in either the front or back. and as for the dexcol, i would have it flushed really well and replaced with the reg green coolant. ive seen that stuff get bad quick.

Jan 02, 2009 | 2006 Pontiac Grand Prix

Not finding what you are looking for?
2008 Ford Mondeo 2.0 Logo

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers


Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides