Question about Hyundai Santa

Open Question

P0605 engine stall son after starting

Posted by on

  • mohsen sajadi
    mohsen sajadi Nov 20, 2013

    thanks for your atention .the truble cod are P0605 internal control modul read only memory (rom) error

  • mohsen sajadi
    mohsen sajadi Nov 20, 2013

    and other cod is P2105 limp home mode force engine shutdown hyundai sonata 2011 2400 cc

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Hi, what does P0605 mean?


this answer courtesy of obd-codes.com code p0605 What does that mean? This trouble code basically means that the PCM/ECM (powertrain/engine control module) has detected an internal control module fault in the ROM (read only memory) in the PCM. The PCM is basically the vehicle's "electronic brain" that controls functions such as fuel injection, ignition, etc. When self-checks fail in the ROM, this DTC is set. This code is a generic powertrain code. It is considered generic because it applies to all makes and models of vehicles (1996-newer), although specific repair steps may be slightly different depending on the model. A cursory search on the 'net shows this DTC to be more commonly found in Ford and Nissan vehicles. Symptoms Symptoms of a P0605 DTC will include MIL (malfunction indicator lamp) illumination, although there may be other symptoms including but not limited to various warning lights on dash, stalling, and no start conditions. Potential Causes There is an internal fault in the PCM / ECM Using an aftermarket performance programmer may trigger this code Possible Solutions In some cases, "flashing" the PCM with an updated software can fix this DTC. You will need acess to make & model specific information such as Technical Service Bulletins (TSBs). If there are no PCM flash updates, the next step would be to check some wiring. Inspect and check for proper voltage and ground to the PCM and throughout the associated circuits. If there are problems with them, repair and retest. If the wiring checks out OK, the next step is to replace the PCM, which is the most likely repair for this code. This is generally not a "do-it-yourself" task, although in some cases it may be. We strongly recommend you have a qualified repair shop / technician do the work, one that has the capability to reprogram the new PCM. Installing the new PCM may involve using special tools to program the vehicle's VIN (vehicle identification number) and/or anti-theft information (PATS, etc.). As an alternative to replacing the PCM, some specialized shops may actually be able to repair the PCM. That may involve removing the PCM, shipping it off to them for repair, and re-installing it. That's not always an option for daily drivers. N

Read more at: http://www.obd-codes.com/p0605
Copyright © OBD-Codes.com this answer courtesy of obd-codes.com

Jul 11, 2015 | 2011 Kia Sorento

2 Answers

Code P0605 Van Does Not Run


This should make some interesting reading for you. good luck.https://www.autocodes.com/p0605_nissan.html

Jul 22, 2017 | 2004 Nissan Quest

1 Answer

P0605


This is an error for the Read Only Memory.(ROM) You have a longer Warranty with a Lincoln and if this part is classified as necessary for Federal Emissions the coverage continues even longer.
You have about 25 start-ups before the record for P0605 is erased unless the fault continues.

May 12, 2013 | 2010 Lincoln MKT

2 Answers

Code p0605. 2006 f 150


Powertrain Definition: Internal Control Module Read Only Memory (ROM) Error P0605 FORD Description The ECM consists of a microcomputer and connectors for signal input and output and for power supply. The ECM controls the engine.
Most common cause of this code is a defective ECM (Electronic Control Module), in your year the part is known as the PCM (Powertrain control module)

Jan 27, 2011 | 2006 Ford F-150

1 Answer

Check Engine Light on, codes P0605 and P0700


P0700 IS A CODE SAYING THAT THERE IS FAULT IN TRANS CONTROLLER..P0605 IS AN INTERNAL ERROR IN TRANS CONTROLLER..ACCORDING TO TEST,TRANS CONTROLLER MUST BE REPLACED

Feb 15, 2010 | 2002 Dodge Stratus

1 Answer

Engine quit running , fuel odor drivers side just prior to


My experience in this makes me think that you have a rusted fuel line, at the top of the tank. This is a common problem. I remove the tanks and replace the fuel tank fuel line/bracket assembly quite a bit.

Jan 13, 2009 | 1994 Toyota 4Runner

1 Answer

ENGINE STALLS WHEN FIRST STARTED


Sounds like a vapor lock. If it's possible, try re-routing the fuel line to the injectors. That should help

Oct 05, 2008 | 1992 Toyota Celica

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...