Question about 2000 Renault 181

1 Answer

My feul pump works and the engine start but after ruining for 10.min the engine goes off,i don't know the courses of the issue maybe fuel pump failure or sensor .i need help

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 74 Answers

Sounds like a sensor, maybe a CPS sensor, with engine cold the computer runs off of a preset setting (called closed loop) but when the engine reaches operating temp the computer switches over to an open loop , where it will then take readings from various sensors, the usual culprit is the Crank Shaft Position sensor (TPS) , you can remove it and have it tested, Autozone or Advanced Auto Parts should be able to do this. If the engine light comes on you can hook up a code reader to retrieve any past stored codes and go from there...

Posted on Nov 18, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1998 f250 5.4l would not start. changed feul pump and filter still would not start. 20 mni later started. was cleaning engine while running 10 15 min later died wont start.


Check fuel pressure at the injector rail. Could be your fuel pump relay is cutting out. If fuel pressure is good, check for sparks at the plug wires. Read the link below for more info.
Do It Yourself Diagnosis and Repair

Jul 26, 2017 | Cars & Trucks

1 Answer

Vehicle starts and runs beautifully, but after about 10 min. shuts down and will not start. Fuel problem, Overheating, safety feature so won't ruin motor, how to repair?


Might run beautifully but you have to check the thermostat works. Check that the fan cuts in when it should do. Check that your radiator is entirely clear of obstructions. Check that there is no water in your oil .
Failure to tackle overheating at an early stage can cause engine failure.
Is ignition timing retarded?

Jun 20, 2015 | Cars & Trucks

1 Answer

Truck just quit at a redlight intersection today and acts like it has no gas. The gas guage also goes from empty too 1/2 tank too empty too full some times for no apperant reason!!


So do you know if you have gas in your tank or not? You need to check for fuel pressure to make sure your pump is working. Inside you fuel tank is a fuel pump module which consists of your fuel pump and fuel level sender. It sounds like you are going to need to replace that. Can you hear your fuel pump buzzing. Open you gas filler cap and put your ear next to it while having a helper turn the key to the run position not start position. You should hear it run for about 5-10 seconds and then shut off. If you don't hear it you have a problem with your pump. It can be with the wiring, feul pump relay, or the pump itself. It is usually the pump. But even if you can hear the pump you still need to check your fuel pressure as the pump may be buzzing but not working correctly. Also check your fuel filter.

Apr 30, 2011 | 2000 Chevrolet Silverado 1500

1 Answer

My service engine light and trac off light are on


It sounds like you need to replace your computor. You could try resetting the computer first. The car maybe in lockout mode. Try turning your car over….leave the ignition on. Wait exactly 10 min. Then try turning over again….again leave the key on. Wait exactly 10 min and do it a third time….this time the car should start…maybe run a lil rough while it relearns the processes of your vehicle again. It is important to wait the exact 10 min each time. You will probably need a battery charger or a set of jumper cables because if your car goes low during this process it will not work. Good luck and I hope this works.

Apr 03, 2010 | 2004 Pontiac Grand Am

1 Answer

1993 pontiac sunfire turns over but wont start.I can hear fuel pump working? help!!


This works for a 96-98 grand am for sure. Maybe help ou out? You could try resetting the computer. The car maybe in lockout mode. Try turning your car over….leave the ignition on. Wait exactly 10 min. Then try turning over again….again leave the key on. Wait exactly 10 min and do it a third time….this time the car should start…maybe run a lil rough while it relearns the processes of your vehicle again. It is important to wait the exact 10 min each time. You will probably need a battery charger or a set of jumper cables because if your car goes low during this process it will not work. Good luck and I hope this works.

Mar 30, 2010 | 1993 Pontiac Sunbird

1 Answer

Engine dies after 5 min like it gets no feul after 30min starts


Hello there:
If your mechanic replaced the fuel pump and hopefully the fuel filter there is a fuel pressure sensor that could be bad i would take the car to autozone aand have them hook up the diagnostic machine to it (this is free for you)
it will tell you exactly what sensor is causing this or if it is a relay that is going bad ok?
Hope this is very helpful for you
Best regards Michael .

Jan 18, 2010 | 1986 Volkswagen GTI

1 Answer

My 450 ford moter home turns over but will not start I suspect feul pump


Hello mfsbrown: My name is Roger and I will help. First thing to check is to make sure the fuel filter dirty. Next you should check the fuel pressure. This will require a fuel pressure tester. You did not say if you have a gas or diesel engine. So I will furnish both test pressures. For a V-10 gas engine. (KOEO) Key On Engine Off 35 to 45 psi. (KOER) Key on engine running 28-45 ps. IF your engine is a diesel then the pressures are (koeo) 30 psi. min. (koer) 30-80 psi. If the fuel pump is your problem. Make sure to replace the fuel filter. A dirty fuel filter will cause damage to the fuel pump. Should you need further help please just ask. Please rate the answer. This way I know it was helpful. Thank You for using Fix Ya. Roger

Oct 28, 2009 | 2001 Ford Super Duty F 450

1 Answer

1992 toyota celica convertable fails to start after hot


tricky one. not a vapor lock as this typically isn't a problem on fuel injected cars. Maybe the ignition module overheating or could be the fuel pump in the first stages of failure

Sep 11, 2009 | 1992 Toyota Celica

1 Answer

Gas goes into throttle body but does not go into engine. i have cleaned it and changed the injectors


maybe your feul pumps not working to test just trun key to on position but dont try to start listen to hear if feul pumps is runnig

Aug 22, 2009 | 1989 GMC S-15 Jimmy

Not finding what you are looking for?
Cars & Trucks Logo

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Renault Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

xxxxxx xxx

Level 3 Expert

4869 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

Are you a Renault Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...