Question about Cars & Trucks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: mercedes 1999 c200 key fob
Could it be the key just needs re-coding? maybe you are worrying to much as £177 would be about right as that would need coding etc., Try phoning your local Merc dealer or take the key and V5 to them for coding (Hopefully)
Posted on Jan 06, 2009
SOURCE: SEAT TOLEDO WARNING LIGHTS
Could be the motor-management-warning light, but I guess it's the break-warning light. There might be too little breaking-fluid left in the lines ... A boardcomputer-readout should clarify this.
Otherwise, try parking on an ascending road with the nose pointing up, hit the hand-break and wait like 2 minutes; the light should come on. You might wanna retry it with the car's nose pointing downwards as well ... If so, definitely the breaking-fluid, otherwise probably not ;)
In any case - flashing warning light are never ok, so when you see it again and you're sure it's not just the ABS/ESP warning light, go and have your boardcomputer read-out, since it should contain useful errorcodes ..
Posted on Feb 07, 2009
I have a 2001 C240 with the same issue. I removed the positive battery cable from the battery and kept it off for 30 seconds then replaced it. Everything was reset and the key worked.
Posted on Feb 10, 2010
SOURCE: megane key fob wont work
the lazer bulb has snapped off inside your key fob
open it up... move the blubs pins to the revers side of the chip board and solder it to the nipples
make sure you dont turn the bulb as + / - will be the same on ither side of the chip board
Posted on Mar 04, 2010
Tips for a great answer:
Dec 21, 2014 | Citroen Cars & Trucks
Reset your Mercedes-Benz key by placing the key in the ignition of your vehicle while the vehicle is turned off. Do not turn on the vehicle. Press a finger on the "lock" button of your key fob while the key is in the Mercedes' ignition.
Pull the key out of the ignition while continuing to hold the "lock" button down. Continue to hold the "lock" button for the duration of the key resetting process
Use another finger to push down on the "unlock" button five consecutive times. Keep holding down the "lock" button.
Release the "lock" button. This is the end of the resetting process for your Mercedes-Benz. Use your key fob to ensure it is properly working
Nov 23, 2012 | 2008 Mercedes-Benz Mercedes Benz C Class
Feb 22, 2011 | 2007 Mercedes-Benz C230 Sedan
Oct 15, 2010 | 2007 Mercedes-Benz ML320 CDI
Dec 31, 2009 | 2009 Honda Pilot
Aug 25, 2009 | 2000 Renault 181
Jun 25, 2009 | 2007 Mercedes-Benz ML63 AMG
May 14, 2008 | 2007 Mercedes-Benz ML63 AMG
56 people viewed this question
Usually answered in minutes!