Question about 2006 Toyota Highlander Hybrid

Open Question

2006 toyota highlander maintenance light on in instrument panel

Maintenance indicator coninuously on.Cannot reset

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1861 Answers

SOURCE: "Needs Maintenance" light on 2006 Sienna

I get many calls a week for this procedure...
This is really easy! Follow these directions:

Turn the key ON

Look at the odometer, and verify that it displays "ODO" and the total mileage traveled. If it is on "Trip A" or "Trip B", press the black stick next to the odometer to read "ODO", and the total miles traveled.

Turn the key OFF.

Press in, and HOLD the black trip meter reset button, hold it in.
DO not release it.

Turn the key ON, do not start the engine

Observe the Odometer display. The total mileage traveled will disappear, and you will see 5 dashes, then 4, then 3, then 2, then 1 dash, and finally, 5 zeros. Then, the total mileage traveled will redisplay.

Release the black trip meter reset stick.

This completes the reset procedure, and it will be back on in 5,000 miles, to remind you of you next oil change.

Hope this helps!

Posted on Feb 06, 2009

  • 140 Answers

SOURCE: Reset the maintenance required light on my 2008 toyota corolla

OK ON YOUR SPEEDOMETER, THERES TRIP A, TRIP B, AND THE REGULAR ODMO... U NEED TO PUT IT ON TRIP A (WITH THE KEY OFF) ONCE U GET IN ON TRIP A, PUSH AND HOLD THE BUTTON DOWN,WHILE HOLDING BUTTON DOWN TURN KEY ON, YOU WILL SEE LINES POP UP ON THE ODOMETER, (WHERE THE MILES ARE DISPLAYED) THEY WILL GO OUT ONE BY ONE, ONCE IT STATES 0 YOU ARE GOOD TO GO.. GOOD LUCK AND THANK YOU FOR USE FIXYA.COM..KEITH..

Posted on Mar 14, 2009

  • 1 Answer

SOURCE: How to trun off Maintenance required light in 2006 Toyota Avalon

turn ignition key to 'acc' or 'lock' position press and hold tripmeter knob while pressing knob turn key to 'on' but do not turn over engine release trip when light goes out

Posted on Apr 13, 2009

Murphybanton
  • 2004 Answers

SOURCE: Computer warning Oil maintenance 2008 Highlander Hybrid

Please email me on onifadeadewunmi@hotmail.com and I will email you the procedure in printed matter.

Cheers

Posted on Apr 14, 2009

  • 1861 Answers

SOURCE: Maintenence required light and tire pressure

The maintenance light needs to be reset manually. See my Tips and Tricks on this website for additional information on how to reset it.

You should also check your spare tire for proper inflation. It will set the tire pressure light, as the spare is monitored also. If all 5 tires are OK, you may have a malfunctioning tire pressure sensor. If the tires have been changed recently, people with older tire machines have been known to break the sensors regularly, by mistake.

Posted on Aug 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does the Master system warning indicator mean on my 2014 Toyota Highlander


If this light is on, there will likely be text displayed as well on the instrument panel, or another warning light. Look for text in particular. It could very well point out something as serious as low oil pressure. However, despite the serious look to the symbol, it is generally associated with simple reminders such as a door ajar or that it is time to change the oil.

Oct 13, 2016 | 2014 Toyota Highlander

1 Answer

Turn light will not turn off, not blinking, When turn on signal or 4 way flashers goes off for a few seconds then comes back on


2006-2015 Toyota Highlander MAINT REQD Light Reset

seventrumpet.com/2006-2015-toyota-highlander-maint-reqd-light-reset/
Mar 15, 2015 - How to MAINT REQD Light Reset on Toyota Highlander 2006, 2007, ...Turn the ignition switch to the "On" position, but do not start the engine ... This procedure should applies to the second and third generation of the Toyota Highlander (2005, 2006, 2007, 2008, ... Your email address will not be published.

Oct 12, 2015 | 2005 Toyota Highlander

1 Answer

How do i reset my manint req's light after an oil change on a 2003 Honda pilot


Reset oil service light Honda Pilot. From years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012.
How do you reset oil service light Honda Pilot. From years: 2003, 2004, 2005.
  1. Turn off the engine. Press and hold the SELECT/RESET button in the instrument panel and turn the ignition switch to run (one position before starting).
  2. Hold the button for at least 10 seconds, until the indicator resets.
  3. Turn the ignition off and then start the engine to verify the indicator has been reset.
How to reset oil service light Honda Pilot. From years: 2006, 2007, 2008, 2009, 2010, 2011, 2012.
Resetting the Engine Oil Life Display if maintenance service is done by someone other than your dealer, reset the maintenance minder as
follows:
  1. Turn the ignition switch to the ON (II) position.
  2. Press the select/reset knob repeatedly until the engine oil life is displayed.
  3. Press the select/reset knob for about 10 seconds. The engine oil life and the maintenance item code(s) will blink.
  4. Press the select/reset knob for another 5 seconds. The maintenance item code(s) will disappear, and the engine oil life will reset to 100.
All information is taken from the Honda Pilot owners manual.

Mar 09, 2015 | 2003 Honda Pilot

1 Answer

2005 Highlander instrument panel shows lights on three symbols


The VSC and Traction Control require the engine to be at 100% in order to function correctly. As a fail safe these systems a disabled anytime the engine computer detects a fault. When they are disabled the lights are illuminated to let you know that they will no longer function. The true problem is with the check engine light. The engines computer has detected a problem with a sensor or system that it monitors or controls. You have three options to get the codes that will help you determine what's wrong 1. You can buy an inexpensive code reader for about $50 and pull the codes yourself. 2. You can call your local parts store to see if they can pull codes for you. 3. You can visit your local repair shop or dealer and have them perform a diagnosis. There is usually a set fee. They will pull codes, run some tests, and pinpoint the problem for you. Let me know what you figure out.

Apr 05, 2013 | 2003 Toyota 4Runner

1 Answer

2006 Toyota Corolla le - maintenance light on front panel - engine serviced with oil and air filter changed two months ago. All liquids fine, car working well...what might it be??



  • That light is an indicator that the required miles have been drove and it's time to do an oil change. The light should be reset after every oil change as the computer keeps track of the miles to warn you when it's time again should you forget.

  • If you want to turn the light off then follow these steps.


  • Push and hold the trip button and then turn the ignition to on while holding the trip reset button. Keep holding for 10 seconds and the maintenance required light will go offf.


Regards, Tony

Oct 15, 2011 | 2006 Toyota Corolla

1 Answer

Instrument panel light, looks like tire pressure light. what doesmthe light mean


if its the tire pressure light which looks sort of like this ( ! ) with a squiggly line under it, one or more of your tires either has too much air in it or not enough

Nov 30, 2010 | 2006 Toyota Highlander

1 Answer

Maintenance Required Soon light came on. What does this mean? I just had my vehicle taken in for an oil change last week and everything was in great condition.


"Maintenance Required" is an automatic indicator which runs on your mileage. Once serviced the counters need to be reset. It could be that when you had the oil change the service centre did not reset the computer (they forgot, ps. this is not somethuing you can DIY) or you did not take it to a Toyota service centre, in which case they did not have the electronic gadget needed to do the reset. Get it back to Toyota or at least someone who can do the reset.

Jun 22, 2010 | 2006 Toyota Highlander

2 Answers

Maintenence required light and tire pressure lights will not go off after oil change and tire rotation on my Toyota Highlander. How do I turn them off?


The maintenance light needs to be reset manually. See my Tips and Tricks on this website for additional information on how to reset it.

You should also check your spare tire for proper inflation. It will set the tire pressure light, as the spare is monitored also. If all 5 tires are OK, you may have a malfunctioning tire pressure sensor. If the tires have been changed recently, people with older tire machines have been known to break the sensors regularly, by mistake.

Aug 10, 2009 | 2009 Toyota Highlander

5 Answers

Reset oil maintenance light in 2008 toyota highlander


  1. Set the "ENGINE START STOP" or engine switch OFF with the trip meter A reading shown.
  2. While pressing the trip meter reset button, set the "ENGINE START STOP" switch or engine switch ON.
Without multi-information display

  1. Continue to press and hold the button until the trip meter displays 000000.
With multi-information display

  1. Continue to press and hold the button until "COMPLETE" appears on the multi-information display.
there you go jimmy mark as fixya

Sep 26, 2008 | 2008 Toyota Highlander

1 Answer

How to reset the tire pressure warning light on 2006 toyota highlander


There is a button under the steering column to reset the light.

Sep 03, 2008 | 2006 Toyota Highlander

Not finding what you are looking for?
2006 Toyota Highlander Hybrid Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...