Question about Toyota Cars & Trucks

Open Question

1995 tacoma flywheel torque

Can't find the tightening specs on 95 tacoma 2.4l engine.

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: Torque spec for flywheel bolt: Isuzu 2.5 diesel engine

normally 110 nueton metres. use nut lock and once you have torqued you will feel if you have to tighten it a bit more.

Posted on Aug 15, 2008

  • 916 Answers

SOURCE: tightening head

New Headbolts are recommended

Long bolts are torqued to 46'lbs + 90 degrees.

Short bolts are torqued 43'lbs + 90 degrees.

Start in the center, and work to the edges, torquing the bolts in two stages.

Rockers are torqued to 22'lbs.

Posted on Dec 21, 2008

  • 1 Answer

SOURCE: Replacing head gasket on 1995 honda civic, require torque specs and secquence

wow. a lot of bad information on this site. Refer to a manual for the proper torque sequence. The civic I believe is a two step torque procedure. First 22 ft lbs, than 53 ft lbs.

Posted on Jan 01, 2009

chuck943
  • 783 Answers

SOURCE: torque specs foe 4.9 ford f150 flywheel

75-85 ft lbs

Posted on Mar 04, 2009

  • 1 Answer

SOURCE: toyota 4k torque settings

torque setting for crankshaft,head,rocker,

Posted on May 06, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Torque settings on a yaris 1.3 16v big ends,mains,flywheel,cylinderhead


Toyota Yaris Main and Big end Torque settings:
Tighten the main and big end bolts in sequential order and in two steps.
Main bearings. Stage 1.
22 ft lbs.
Stage 2.
44 ft lbs

Big end bearings.
Stage 1.
11 ft lbs.
Then Rotate bolt head a further by 90 degrees

Head bolt torque must be done in 3 steps:
1st 22 ft lbs
2nd 43 ft lbs
final 47 ft lbs
use this sequence of tightening:
9 - 3 -1 -6 -8
7 - 5 - 2 -4 - 10

Flywheel spec:
65 ft lbs

Jul 15, 2016 | 2007 Toyota Yaris

1 Answer

? looking the bolt tension specs for flywheel and clutch pressure plate for 4hf1 thank you


Torque Specification - National Truck Spares ' Parts

www.nationaltruckspares.com.au/Parts.aspx?ProductTypeID=8...
1073, 4BC2 tq, Isuzu, Torque Specification, KT26 TLD57 NKR57 NPR57 ... 1075, 4HF1Tq, Isuzu, Torque Specification, NKR66 NPR66, 92 - 03, 4HF1, 4334

Small Block Chevrolet V8 Engine Specs ' Torque Specs ...

boxwrench.net/specs/chevy_sb.htm
Flywheel (Clutch). Thread Locker, 60 ft-lbs. Clutch Pressure Plate, Thread Locker, 35 ft-lbs. Centerbolt. (Harmonic Damper). Engine Oil, 60 ft-lbs. Bellhousin

Nov 07, 2015 | Cars & Trucks

1 Answer

Flywheel keeps breaking on 1994 4x4 explorer


TRANSMISSION FLYWHEEL HAS TO ALIGN CORRECTLY.MAKE SURE FLYWHEEL IS IN THE ALIGNMENT DOWEL BOLTS TIGHTEN IN SEQUENCE IF NOT FLYWHEEL THATS NOT ALIGN CORRECTLY WHEN YOU TIGHTEN IT UP IN A BIND FLYWHEEL WILL CRACK.MAKE SURE FLYWHEEL TORQUE IS 59 FT LBS FOR THE 4.0 ENGINE.THE 5.0 ENGINE FLYWHEEL BOLTS TORQUE IS 75 - 85 FT LBS.IF OVER TIGHTEN FLYWHEEL IT WILL CRACK IT.

Jul 25, 2011 | Ford Explorer Cars & Trucks

1 Answer

I need the torque specs for a ford 300 inline 6


Tighten all bolts to 10 Lbs, then 20 Lbs, then 35 Lbs.
That should be fine for the 6 cylinder flywheel.

Oct 08, 2009 | 1997 Ford F150 Regular Cab

1 Answer

What is the torque specifications on a 1995 chevy cheyenne 1500. looking for the torque specs on the bolts going from the transmisison to the bell housing.


transmission to engine is 32ft lbs but is normaly tighten alot tighter you can't screw this up tighten really tight

May 08, 2009 | 1995 Chevrolet K1500

1 Answer

I need torque specs for 94 rodeo


flywheel 80-90 foot lbs (new bolts 90), press plate 45 foot lbs

Feb 14, 2009 | 1995 Isuzu Rodeo

1 Answer

Torque specs for the flyhwheel of a 1998 toyota tacoma?


Thank you for responding. They figured out by talking to another mechanic what they needed to do. They just didn't know how much torque was needed and since the mechanic didn't know either he told them how to tighten it. It appeared to work. Again I appreciate you getting back to us.

Dec 29, 2008 | 1998 Toyota Tacoma

4 Answers

Head bolts torque settings


According to my haynes manual for G-S reg, 1989-1998 it goes as follows,
Stage 1:- Tighten all bolts by hand until bolt heads just contact cyl. head.
Stage 2:-Tighten all bolts to 40Nm or 30lb ft.
Stage 3:-Angle tighten all bolts a further 60 degrees.
Stage 4:-Angle tighten all bolts again a further 60 degrees.
Stage 5:- M12 x 140mm bolts ONLY angle tighten a further 20 degrees.
Hope this helps everyone, sorry it seems longwinded but that is how it's written in the manual.

Oct 26, 2008 | 1995 Land Rover Discovery

1 Answer

Torque spec for flywheel bolt: Isuzu 2.5 diesel engine


normally 110 nueton metres. use nut lock and once you have torqued you will feel if you have to tighten it a bit more.

Jul 27, 2008 | 1995 Isuzu Pickup

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...