Question about Mitsubishi Cars & Trucks

Open Question

How to remove a front wing from a mitsubishi l200

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove gear stick on 2008 Mitsubishi l200


For the handle. Pull it back, on the front there will be a slot or set screw in the front. Set screw takes an allen wrench to loosen. Slot, insert a small flat screw driver and push in and pull up. To remove the shifter , you have to remove the console first. Screws and bolts could be(I do to many, I just know where to look). Panels under the dash, under cup holder mats, remove the box and lid, some under them. At the back, remove the blower vent or cover. and on the sides, you have to move the seats forward to get to them. then 4 bolts to remove and the wires and cables.

Dec 18, 2016 | Mitsubishi L200 Cars & Trucks

1 Answer

Engine 4d56 loose refs and go to idle


If this is a fly by wire throttle, pedal assembly may be failing.

Jun 01, 2016 | 2011 Mitsubishi L200 2.5

1 Answer

How to change oil pan


Try jacking the car up instead? Here's a link to a mitsubishi service manual with diagrams of a motor.
http://www.mitsubishi-motors.kiev.ua/Manuals/Engine/pwee9067/11B.pdf

Mar 30, 2014 | 2006 Mitsubishi L200 2.5

1 Answer

Mitsubishi l200


its always in the front of the car.in front by the bumper

Nov 10, 2013 | Cars & Trucks

1 Answer

Where is the relay glow plug located on a mitsubishi L200 4x4 2003 diesel


tilt the bonnet,ask someone to sit byt the drivers seat and ask him to turn the ignition on.immediately you should listen a click on the front left side inner wing. That noise comes from the relay. also check on the cylinder head on the right side behind the cover of timing cover above the first injector there is a sensor when engine is warm or cold to allow the time of the glow plugs to work.

Sep 03, 2012 | Cars & Trucks

1 Answer

L200 paint code,mitsubishi, 2001


Check this link: choosecolor.aspx?make=Mitsubishi&model=L200 or this otger guide in here: MITSUBISHI%20Color%20Information.pdf

Hope helps (remember to rate this answer).

Sep 07, 2011 | Mitsubishi Pickup Cars & Trucks

1 Answer

Oil leak - offside front, near the front wheel with a unit connecting to an arm of some sort. Oil is black. Mitsubushi L200 Animal Year 2003


please check shaft couple from middle engine to front wheel, seal gearbox was common demage (scratch) so cause oil go out from there.

please try

Jul 19, 2011 | Mitsubishi Pickup Cars & Trucks

1 Answer

How do i replace the front brake disc on l200 4 door pick up 02MY


Remove the wheel
Take out the caliper bolts
press piston back into caliper with a brake tool or c-clamp
put new pads in
replace caliper
replace wheel
PUMP BRAKES UP MANY TIMES TO SEAT PADS
Your Done

Jan 30, 2010 | 1988 Mitsubishi Pickup

2 Answers

Grill removal


the lower clips are pushed down with a long screw driver from the front , when the grill is removed the clips need to be removed from the vehicle and put in the grill then push the grill in

Apr 18, 2009 | Mitsubishi Pickup Cars & Trucks

1 Answer

My reversing lights dont work how do I change the bulb? Its a Mitsubishi L200


Remove the screws that attach the lense to the truck. Twist the bulb hold from the backside and remove the bulb. Installation is the reverse.

Jun 11, 2008 | 1988 Mitsubishi Pickup

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

125 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...