Question about Cars & Trucks
Toyota corolla 1.6 20 valve head torqua settings
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
hey, torque must be done in 3 steps:
1st 22 ft lbs
2nd 43 ft lbs
final 47 ft lbs
use this sequence of tightening:
9 - 3 -1 -6 -8
7 - 5 - 2 -4 - 10
Posted on Jan 14, 2009
Thats about standard throughout engine rebuilding
Posted on May 05, 2009
Tighten in several passes to 44 foot pounds.
I just wanted to add. Since this is an aluminum cylinder head, I hope you loosened the head in the loosening torque pattern. The pattern opposite of the torque tightening pattern. If not, you stand the chance of warping the head.
Again, since it's an aluminum head, it needs to be checked for flatness. Most aluminum heads need to be surfaced before re-installing.
Tightening torque pattern is as follows:
1.The Drivers side of the engine is the Left side.
From the Front going towards the back; the bolts are numbered 10, 6, 1, 3, and 7.
From the Front going towards the back on the Passenger side; the bolts are numbered 8, 4, 2, 5, and 9.
The Exhaust and Intake Camshaft Bearing Cap bolts go to 9 foot pounds. Tighten gradually. One bolt to the other with so many foot pounds, work back, and forth up to 9lbs.
Camshaft Timing Pulley bolts go to 43 foot pounds. (In a tightening sequence, and gradually)
Posted on Jul 25, 2009
hi big end bearings are two stage, 25nm leave ten mins, then 49nm cylinder head bolts three stages 20nm leave ten mins, 40nm leave ten mins then 60nm check after 5,000miles hope this helps
Posted on Apr 07, 2010
Umiformilly tighten each of the ten head bolts in several passes, in the sequence shown. Tighten them to 44 ft. lbs. (60 Nm).
Posted on Jul 23, 2010
Tips for a great answer:
Apr 25, 2015 | 1999 Toyota Corolla
Mar 31, 2014 | 2003 Toyota Corolla
Mar 29, 2014 | 1993 Toyota Corolla
Feb 15, 2014 | 1990 Toyota Corolla
Feb 22, 2011 | 1995 Toyota Corolla
Apr 07, 2010 | 2000 Renault 181
Jan 12, 2010 | 2000 Renault 181
Dec 14, 2009 | 1987 Toyota Corolla 2 Door
May 05, 2009 | 1992 Toyota Corolla
Jan 14, 2009 | 1985 Toyota Corolla 2 Door
Oct 21, 2017 | Cars & Trucks
26 people viewed this question
Usually answered in minutes!