Question about Suzuki Cars & Trucks

Open Question

Suzuki sx4 back seat back stuck

Back seat part folding forward stuck

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: how to fold down back seat

There should be a loop between the seat and backrest, pull that and the seat will pull toward the front seats. After that, pull the lever located at the outside of the backrest. This lever is on the outside of the seat by the door-side of the seat. Pull that up and allow the backrest will fold down and the headrest will pivot back and your seat is folded down.

Posted on Jul 12, 2008

  • 1 Answer

SOURCE: Volvo V70 rear seatbelt jammed

you can remove the bolt that holds the seatbelt to the floor by pulling off the seatpad where the belt goes to the floor and then raise the seat and the belt should reset. this happens on my passenger side rear seat.

Posted on Dec 23, 2008

dsacco86
  • 1077 Answers

SOURCE: 2003 Toyota Corolla LE back seat fold down? how?!

Open the back trunk, look near the top of the trunk, and pull the two black levers. They have a seat folding down symbol. That will release the locks to fold the back seat down.

Posted on Jul 04, 2009

  • 1 Answer

SOURCE: Driver's seat unable to move forward or backward

There are plastic gears connecting the track to the seat assembly. Whne one of these strip the seat will only work or move to one side. Infiniti does not sell a simple fix. You are looking at buying an entire seat assembly complete with the module for all the electronics. It will be at a cost of around $950 - $1000. Once that is in, Infiniti must program the seat to the brain of the car, only then can you reset your memory settings.

Posted on Oct 02, 2009

  • 1 Answer

SOURCE: back seat (middle belt) belt stuck and unable to release.

Hi, We are having the same problem with our son's car. Were you able to come up with a solution?

Posted on Dec 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Rear seat does not fold down when I push button. Can I manually fold down?


Give the button area a good smack! The mechanism is probably just stuck in place. Try rocking the seat back and forward while pushing it as well. It sounds simplistic, but usually does the job.

Mar 23, 2015 | 2007 Ford Explorer Eddie Bauer

1 Answer

How do seats fold down?


There might be a short strap in the center of each section where the back and the seat come together. Pull that strap to release and fold the seat aginst the front seat. Then you should seelatches to release the backs and fold them down. Hope this helps

Sep 25, 2014 | 2002 GMC Yukon Denali

1 Answer

Ait bag warning light on, plus passenger seat doesnt fold forward correctly and difficult to get back in the correct position after letting passengers into the rear. 2002 cooper. thanks


Regarding the passenger seat, to allow someone into the back seat, push the seat back lever DOWN. This will flip the back of the seat forward and allow the seat to slide forward. Simply push firmly on the seat back (no need to touch the lever) and it will return to its original position.

If you pull the seat back lever UP, you can adjust the recline angle of the seat back. Pulling the lever UP will also let you fold the seat and slide it forward, however, it will not return to its original position.

Sorry, cannot solve your airbag question.

Mar 11, 2011 | 2002 Mini Cooper

1 Answer

2006 Ford Explorer: Back seat won't fold flat to create flat cargo area. It folds down but not flush.


Okay so im just going to start from the seat being upright in a normal riding position.

1. You need to fold the head rests first. Pull the black tab under both headrests. They should spring into a folded position.

2. pull the side seat lever (on the door side of the seat). This will fold the top/back support down to an angle.

3. There is one more lever on the backside of this seat. Its in plain sight on the angled portion of your seat. Lift the big plastic lever.

4. While keeping the handle lifted, grasp the back of the seat and pull it torwards the front of the car. The seat should come unlocked and roll forward and down more towards the floor. If you have a bunch of junk on the floor, it obviously wont work. clear the path and the seat will fold completely flat.

Also, your drivers seat and front passenger seat cannot be all the way back, they need to come forward some in order for the second row seats' head rests to clear and fold flat.

Oct 02, 2010 | 2006 Ford Explorer

1 Answer

Can i remove the back seats in my 2008 suzuki sx4 crossover?


should be on right side of van under the hood

Feb 11, 2010 | 2008 Suzuki SX4

1 Answer

How do I remove the rear seat on a 2001Volvo V70?


I am going to assume you mean the normal rear seats, not rear facing seats in the very back.
The rear seat folds down. The benches fold up from the back. When they are up you can see how to easily remove them if you want.
When the benches are up the backs fold down. There are levers on the top the slide forward to release them so they can be folded down. Tip the outboard head restraints forward by pulling their straps. The center head restraint has a button behind its right-hand support that you push to allow it to be lowered.

Nov 29, 2009 | 2001 Volvo V70

1 Answer

How to fix a stuck seat belt VW GTI 2009


I just solved the problem for a stuck rear center seat belt in my 2002 Jetta.

Flip the base seat cushion forward against the front seat backs. Trace down along the belt to its tether point on the floor. The belt is sewn around a steel loop. The loop is anchored to a black steel hook. A thin silvery retainer plate is spring tensioned on top of the loop to prevent it from sliding off of the hook when the seat back is folded.

Therefore, you need to press the silvery retainer plate away from the hook (push up) to allow the loop to be slid from the hook. The belt was tight with the seat back in the upright position, so it was necessary to fold the seat back forward to create slack in the belt. Now push the belt loop towards the trunk and slide it off of the end of the hook (only possible with the retainer plate pushed up out of the way).

Now with total release of tension on the system via the bottom end of the seat belt being untethered and with the seat back returned to the upright position, normal extension and retraction of the belt will be reestablished. Next, simply extend the seat belt and slide the loop back into place over the floor hook. It snaps past the silvery retainer plate without all the effort required to hold the plate up during removal of the loop during disassembly.

Check again, the seat belt should be extending and retracting properly. Now just put the seat cushion back into regular position and you will be able to safely buckle up three people across the back seat.

It took about as long to do this repair as it has taken to post this answer to the problem. Note, the seat belt safety mechanism only allows normal extension and retraction of the belt when the seat back is upright.

Nov 29, 2009 | Volkswagen GTI Cars & Trucks

1 Answer

How to remove 2nd row bucket seats


The manual says to pull the strap or level and "double fold" it. The first time I tried it, the seat stuck. The trick was to do it as a single motion, fold the chair in half and swing the seat up and forward. Don't fold the back down then pull again to get the seat forward, it just gets stuck.

Jul 13, 2009 | 2007 Kia Sedona LX Minivan

1 Answer

One of my third row seats was opened while being stored in the garage. Now I cannot reinstall the seat in the Yukon unless it is in folded position. Is there a trick to folding the seat while it is not...


try using the forwards up or back position to relieve the pressuer on the seat and one way or the other it will fold as well as use if applicable the forwards or back bar to reinstall the bolts

Jul 12, 2009 | 2001 GMC Yukon

1 Answer

The back seat not going up .


The double seat actually gets caught on the bottom of the second row seat cover. If you move the second row middle seat forward a couple of inches it will release the rear folding seat and allow it to return to the upright position. You can also reach inside the back seat and push the seat cover ( which by the way has a metal bar in it ) forward to release the rear seat.

Oct 10, 2008 | 2004 Ford Expedition

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...