Question about 1988 Dodge D-Series Pickups
Already replaced alternator and still not getting any amprege
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Remove negative battery cable.
Remove the electrical plug and wireing. Mark them.
Loosen the alternator pivot bolt.
Remove the bolt that attaches the alternator to the adjustment arm.
Rotate the alternator to loosen the drive belt and disengage the belt from the pulley. Be careful that any spacers that are used in mounting are kept with their original bolts. This will make correct reinstallation much easier.
While supporting the alternator remove the pivot bolt.
Remove the alternator from the vehicle.
Do the reverse procedure to install new alternator.
Posted on Feb 03, 2009
SOURCE: 2001 dodge 2500 v10 has low idle
On my 06 v10 there is a idle adjustment screw at the linkage on the throttle body.
clean air filter
clean sensor in the air intake ram
try some 93 octane
Posted on Feb 04, 2009
you need to put an oil pressure gauge on it and see what happens.what you will find is that the sender unit is no good.
Posted on May 18, 2010
It's in the fuel tank, no service, only gets replace if fuel pump goes bad, fuel filter is part of the fuel pump, comes as one unit only.
Posted on Jul 22, 2010
Tips for a great answer:
Apr 01, 2014 | 1995 Dodge Ram 2500
Aug 30, 2010 | 2001 Dodge Ram 2500 Truck
Jul 22, 2010 | 1995 Dodge Ram 2500
May 18, 2010 | 2001 Dodge Ram 2500 Truck
Apr 26, 2010 | 1997 Dodge Ram
Jan 11, 2010 | 1997 Dodge Ram 2500 Club Cab
Jan 11, 2010 | 1999 Dodge Ram 2500 4WD
Sep 21, 2009 | 2001 Dodge Ram 2500 Truck
Jul 19, 2008 | 1995 Dodge Ram 2500
46 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: