Question about 2002 Toyota Avalon
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
To program a remote... note that you must not delay more than 10 seconds between any of the operations.
Driver's door open, all other doors closed, key removed from the ignition switch.
Insert key into ignitions switch, then remove it.
Press LOCK then UNLOCK on the vehicle door lock control switch at 1 second intervals 5 times.
close and re-open drivers door.
Press LOCK and UNLOCK on the vehicle door lock control switch at 1 second intervals 5 times
Insert Key into ignition switch.
Switch ignition ON and OFF once to program a remote transmitter code while retaining the original codes or twice to program a remote transmitter code while erasing the original codes. three times to check how many remote transmitters are currently registered, or 5 times to erase all registered codes.
Remove Key from ignition switch.
System should now lock and unlock vehicle. Once, twice or five times depending which mode has been selected. It will lock and unlock one to four times slowly, to indicate the number of remote transmitters registered if you chose option 3.
Press and hold remote transmitter LOCK and UNLOCK buttons at the same time.
Press LOCK remote button for 1 second: System should now lock and unlock vehicle once to confirm, twice to indicate registration has failed.
NOTE: to exit programming mode, close drivers door or insert key in the ignition.
NOTE: a maximum of 4 remote transmitters can be programmed
Posted on Oct 13, 2008
My god, have you people never seen a car with a built-in garage door opener?
Hold down the button for the avalon's opener until the light starts flashing fast. When it does, hold the normal opener a few inches away and hold the button down for a few seconds. After that you should be able to just press the opener on the avalon again and the door should open/close.
Posted on Nov 27, 2009
Hello.I will be glad to help you out.
Choose which of the 3 buttons you wish to use, on the car.
Take the remote transmitter, depress the actuator button, and continue to hold it until advised to release.
Depress the button, on the car, of your choice, and hold it down until advised to release.
Hold the garage door actuator (while holding the actuator button down) above the car's 3 buttons.
Rotate the door transmitter until the red light above the 3 buttons starts to flash slowly.
Stop moving the remote around when the light flashes slow.
Within several seconds, the same light n the car will now flash rapidly.
Release the car's button, release the transmitter button.
Verify that the door now operates..
Posted on Nov 30, 2009
You may find that this porcess is with your GARAGE DOOR opener and not the car. Rolling code technology units require that you press a button on your opener motor, (get a ladder and a light, get up there and read it, have an assistant in the car to press). what you do is press the button on the opener, to accept input signals, then you press the button in the car. Usually you get a flash on the opener's lights, then that sender (car) is accepted.
Posted on Jul 26, 2010
Tips for a great answer:
Jan 31, 2013 | 1997 Toyota Avalon
Dec 13, 2012 | 2000 Toyota Avalon
Dec 24, 2010 | 2008 Toyota Avalon
Oct 23, 2010 | 2006 Toyota Camry
May 13, 2010 | 2002 Toyota Avalon
Oct 01, 2009 | 2008 Toyota Avalon
Jun 21, 2009 | 2002 Toyota Tacoma
Mar 22, 2009 | 2006 Toyota Camry
Feb 17, 2015 | 2002 Toyota Avalon
92 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: