Question about Cars & Trucks

Open Question

Gwm 2.2 engine layout to see where the fast idle cotrol valve is

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
fastboyz
  • 674 Answers

SOURCE: 1999 Ford Escort idle problems

you need to look for a vacume leak thsi would also make your IAC valve go beyond range.good luck

Posted on Sep 12, 2008

Ad
  • 491 Answers

SOURCE: Engine idles to fast and runs rough

you can check timing, or check for vacuum leaks

Posted on Oct 12, 2008

petercw
  • 86 Answers

SOURCE: Bad idle

chk/test yr plugs also. If it starts to break down then chk soliniod & coil as u may be getting the start of a bigger problem. yr symptoms r showing signs of an elecrical problem. rough warm ups r the signs. c/be choke sensor also causing roughness..

Posted on Sep 04, 2012

skychief2001
  • 21873 Answers

SOURCE: engine idles fast at around 2k

Could be a vac leak, or something holding the throttle open.

Posted on Feb 28, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does it have incorrect idle and hangs on fast idle before dropping down to normal?


Problem With Idle Air Bypass Valve May Cause Engine ...

repairpal.com > Problems > Mercury > Sable
2002 Mercury Sable100,000Visitor. Idle control valve makes the idle high and with foot off the accelerator car runs at 40-45 MPH. I disconnected the electrical ...

Aug 07, 2015 | Lincoln Navigator Cars & Trucks

1 Answer

What Makes a 1990 cutlass calasis idle fast.


Could be a dirty or stuck throttle plate, faulty idle air control valve, or a large vac leak.
The computer controls the idle speed by regulating the amount of air entering the throttle body thru the control valve.

Jan 31, 2013 | Oldsmobile Cutlass Calais Cars & Trucks

1 Answer

Idle cotrol vale


Its on the side of the thottle body, two 10mm bolts hold it on, its cylinder shape and will have bright metal on the ends of it, with a wiring harness plugged in on one side, if you locate the air cleaner follow the black intake tube up to the engine, the black tube hooks onto the thottle body, then on the side should be the idle air control valve.

Feb 20, 2011 | 1995 Ford Explorer

1 Answer

Idle probems


It's the Fast Idle Valve or a Vacuum leak. The fast idle valve is in your throttle body (just the part that your intake clamps to) so you'll need to remove that and screw the valve back in, it's towards the firewall. They back out over time and cause this loping idle.

Sep 23, 2009 | 1991 Acura Integra Hatchback

1 Answer

Rough idle(200-300RPM)off idle runs great no white smoke


Have you changed your fast idle valve or air idel control valve I would change the air idle valve because it is the one with an electric sensor.

May 22, 2009 | 1990 Honda Prelude

1 Answer

Fast idle after warm up .already changed IAC valve


fast idle is many times caused by a engine intake vacuum leak, use a can of carb spray and spray the top of the engine for leaks, if u hit one u will hear the eng change idle speed, also look for split or leaking vacuum hoses.

May 20, 2009 | 1994 Chevrolet C1500

1 Answer

High idle all the time on a 1988 5.0 litre engine in a f150


lift hood while running and lisen for a vacum leak and check all vacum hoses. if you dont find a vacum leak then replace the idle air cotrol valve. if the check engine light is on then make sure the code is not for the throttle position sensor. if so then replace the throttle position sensor.

Apr 21, 2009 | Ford F-150 Cars & Trucks

1 Answer

Engine idles to fast and runs rough


you can check timing, or check for vacuum leaks

Oct 12, 2008 | 1989 Ford Bronco

2 Answers

1999 Ford Escort idle problems


PVC valve is not metering air correctly, it will appear ok shaking it but looses it ability to maintain proper position causing a medium to gross vacuum leak.

Sep 12, 2008 | 1998 Ford Escort

1 Answer

Have a 1989 Honda Accord LX and my idle after warmed up, every time I come to a stop my car dies. I've changed plugs, set idle speed a number of times, it will run good for a few days and then it's right...


If you can keep the engine running with your foot on the gas at a stop it is likely to be the Idle control valve. Older Hondas' have 2 valves. fast idle control (which is prone to cause fast, or surging idle due to vacuum leakage) and the Idle control that takes over from the cold idle control once warmed up. They are located at the throttle butterfly assembly.

Jul 26, 2008 | 1992 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...