Question about 1994 Nissan Pickup

1 Answer

Can I switch from a 1957514 tire to a 1957014?

1957514 tires are expensive and not readily available, I rather run on a 1957014, will this be a problem

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • Nissan Master
  • 44,416 Answers

Yes you can but expect an error in speedo reading as you are decreasing the circumference of the tyre meaning it turns faster to cover the same distance.. The 195 is the rim width The 75 is the profile height of the side wall and the 14 is the rim diameter in inches So smaller profile size ==lower car= wrong speedo reading. You can use this information to change the rims IE go to 15 inch rims so the tyre reading would look like this 195 35 15 would be about the same as 195 95 14. By lowering the profile size you can go up in rim dia size and still retain the same speedo readings and car height.. Talk to a tyre shop to get the idea.

Posted on Nov 17, 2013


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have 08 rocker C I am really wanting to put Michelin commander 2 on it my front tire is 9090 they only make 100 90 90. Will the 100 work on it has anyone done this

It probably will throw out the whole alignment of the chassis. If the tire size is not readily avail., don't change it. Suspension will be affected too.

Mar 31, 2017 | Cars & Trucks

1 Answer

How do you reset tire pressure monitors on 2006 Cadillac STS

TPMS readers are expensive, they are specialty and are not easily available. You can go to a dealer, you can try a tire shop, but it is something that you cannot do yourself. Dealers are the most expensive to have this done at.

Jun 12, 2014 | Cars & Trucks

1 Answer

The tire sensor comes on frequently showing low tire pressure. These are expensive tires. What's the problem

make sure tire pressure is above 35 psi. if it continues to come on your tire pressure sensor are bad or val stems your sensor is on the inside of tire connected to val stem. they are expensive.

Sep 04, 2011 | 2003 Lexus SC 430

1 Answer

How to reset tire monitor system

this must be reset by any tire dealer. There is a very expensive tools that resets it. It is not available to the public. Sorry.Some tire shops do it for free. Shop around.

Mar 01, 2011 | 2006 Chevrolet Monte Carlo

1 Answer

The 4 lug nuts were removed and the tire still won't come off. It appears there is a much larger nut in the center of the wheel, but I think I have the tool to remove it.

Nope, just beat on the wheel(metal part), with foot, hammer, sledge(basically anything readily available!
just be EXTREMELY careful not to hit the lug nut "stud"
good luck

Jan 22, 2011 | Honda Accord Cars & Trucks

1 Answer

Tire sensor fault on our 2006 Ford Explorer after new tires

2006 Ford Truck Explorer
NOTE: The tire pressure sensor training prcedure must be done in an area without radio frequency (RF) noise. RF noise is generated by electrical motor and appliance operation, cell phones, and remote transmitters.

1. Turn the ignition switch to the OFF position
2. Turn the ignition switch to the RUN position three times, ending in the RUN position. Do not wait more than two minutes between each key cycle.
3. Press and release the brake pedal
4. Turn the ignition switch to the OFF position.

1- Left Front Tire
2- Right Front Tire
3- Right Rear Tire
4- Left Rear Tire

5. Turn the ignition switch from the OFF position to the RUN position three times, ending in the RUN position. Do not wait for more than two minutes between each key cycle.
6. The horn will sound once and the TPMS indicator will flash if train mode has been entered successfully. If equipped, the message center displays "TRAIN LEFT FRONT TIRE." Place the magnet on the valve stem of the LF tire pressure sensor. The horn will sound briefly to indicate that the tire pressure sensor has been recognized by the TPMS module.
7.Within two minutes after the horn sounds, place the magnet on the valve stem of the RF tire pressure sensor. NOTE: If the TPMS module does not recognize any one of the four tire pressure sensors during the tire training procedure, the horn will sound twice and the message center (if equipped) will display "TIRE TRAINING MODE INCOMPLETE." If this occurs, the entire procedure must be repeated from Step 1.
8. Repeat Step 7 for the RR and LR tires. When the tire training procedure is complete, the horn will sound once and the message center (if equipped) will display TIRE TRAINING MODE COMPLETE.

This should help. For now, probably all Fords are like this. And I do not believe that Ford puts sensors in their spares (some GMs do).
Good luck

Nov 13, 2009 | 2006 Ford Explorer

4 Answers

Tire wear in middle of both rear tires

problem is with over inflating the tires,causing middle tread wear,as long as you have more the 3/32 tread wear in the middle than you are ok.always set tire pressure when cold at around 33psi,check tire inflation sticker on dar jam for exact tire pressure

Jun 14, 2009 | 1993 Toyota Corolla

6 Answers

Tire Replacement

That is absolutely and totally wrong. They want your money. Go to another tire place and have them replace only the tire that is bad. If your other 3 tires are bald or mis-sized, replace them also but it will not affect the tranny.

Apr 13, 2009 | 1999 Ford Explorer

Not finding what you are looking for?
1994 Nissan Pickup Logo

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts


Level 3 Expert

76649 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides