Question about 2001 Dodge Ram 1500 Truck 2WD

Open Question

Heater control valve 2005 dodge ram 1500 4.7 engine

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
RudolfDiesel
  • 100 Answers

SOURCE: The heater is blowing cold but the engine temperature reads high

Hi
I would first check to see if both heater hoses are hot to the heater.
if 1 is hot and 1 is cold the heater control valve is closed or the heater core is plugged.

Posted on Jan 14, 2009

Ad
  • 2 Answers

SOURCE: 1997 dodge ram 1500 v6,i have a misfire,ive changed plugs,wires,distributor cap,rotor cap,fuel pump,rollover valve,coil,still has a miss

you can try changing the ignition coil, I own a 97 Dodge 1500 and mine did the same and thats what i had to do.

Posted on Oct 08, 2008

motor1258
  • 6674 Answers

SOURCE: belt diagram 2004 5.7 liter engine dodge ram 1500 1/2 ton 4x4

click on this link, and scroll down to 5.7L

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c152800ba71e

Posted on Dec 22, 2008

simard2
  • 124 Answers

SOURCE: Where is the EGR valve in my 2005 Dodge Ram 1500 4.7?

Go to the following page to view more information on your EGR Valve:

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c152800ba857

Hope you find what you are your looking for! Good Luck!
If you have any more problems let me know.

Thank you for using Fix Ya!

Don't forget to rate the overall satisfaction of this answer!

Posted on Jan 31, 2009

  • 1596 Answers

SOURCE: 2005 Dodge 1500 code p0404 EGR valve.

The electronic EGR valve and solenoid assembly is attached to the rear of the left cylinder head ,

  1. Remove electrical connector (5) at top of EGR valve solenoid.
  2. Remove tube mounting bolt (1) at intake manifold.
  1. Remove two bolts (4) connecting EGR tube (1) to valve assembly.
  2. Remove gasket located between EGR tube flange and EGR valve assembly.
  3. Remove two EGR valve mounting bolts (5).
  4. Separate valve assembly (3) from engine.
  5. Remove and discard metal gasket located between cylinder head and valve assembly.
INSTALLATION
  1. Clean area at rear of left cylinder head where it joins base of EGR valve.
  2. Clean EGR tube where it joins EGR valve.
  3. Position new gasket between EGR valve and cylinder head.
  4. Position EGR valve to cylinder head. Install and tighten two bolts (5). Refer to Torque Specifications.
  5. Position new gasket between EGR tube flange and EGR valve assembly.
  6. Position EGR tube (1) to side of EGR valve and into intake manifold.
    1. Install EGR tube flange bolt (1) at intake manifold. Tighten bolt. Refer to Torque Specifications.
    2. Connect electrical connector (5) to top of EGR valve solenoid (2).Do a final tightening of two EGR tube bolts (4). Refer to Torque Specifications

Posted on Feb 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 Dodge Ram 1500 4.7 Engine. Starts fine, Idles fine, but when engine shifts into high gear and RPM lowers engine runs really rough under load


Have you checked for a broken valve spring. Repaired a dodge engine with the same running issue as you have described and it was a broken intake valve spring.

Feb 22, 2015 | 2005 Dodge Ram 1500

2 Answers

Where is the pcv valve located on a 2005 dodge ram 1500, 4.7 ltr eng


looking at the engine from front it should be in the right valve cover. a hose comes from the pcv valve to throttle body.to replace it, just pull up on valve to release from rubber grommet. have a good day !!

Jan 08, 2011 | 2005 Dodge Ram 1500

1 Answer

1998 dodge Ram 1500 4X4. The heater/AC blows out of defrost vents only, I am told this most likely a vacuum line, If this is true where is the vacuum line located.


In the engine compartment, locate black vacuum hose that runs from brake booster check valve to intake manifold, there will be a small vacuum hose attached to check valve at the power brake booster check valve. This is the vacuum line going to the heater control unit,check the hose all the way to the firewall, repair any leaks you find. And that should take care of your problem.......GOOD LUCK

Dec 03, 2010 | 1998 Dodge Ram 1500 4WD

1 Answer

Where is heater control valve on 2003 dodge ram pick up


THERE IS NO HEATER CONTROL VALVE ON THE WATER HOSES. NEW HEATER CORE. INLET LINE right before heater core hot, outlet after core look warm. Burped cooling system 5 times with engine at operating temp. Installed homade burp VALVE right after heater core outlet(high part of hose). Still no heat. Removed water pump, impeller still in good shape not stripped off shaft. Removed heater core hoses flushed water thrue the connections on the block to the water pump INLET and outlet. flushed water thrue heater core and hoses. Going to put it back togeter today. Used known good gauge to check water temp for operating temp in test. 195 f

Oct 22, 2010 | 1997 Dodge Ram 1500 Club Cab

1 Answer

2006 dodge ram 1500 agr valve where is it located and any pictures of it


5.7 L engine it's on the front of right cylinder head next to alternator
4.7 L engine it's on the rear of left cylinder head
no egr valve on 3.7

Mar 11, 2010 | 2005 Dodge Ram 1500

1 Answer

2005 Ram 1500 4wd HEMI PO406 - EGR


Hey greenlee99, your best bet would be to grab one these manuals so that you have pictures and diagrams along with step by step instructions. It will tell you what tools and parts you need. Can't go wrong with having it.

Feb 15, 2010 | 2005 Dodge Ram 1500

1 Answer

Heater blows but no heat in my 2003 dodge ram 1500 4x4 with 4.7L engine. what can this be? its a 2003.


If your engine reaches normal operating temperature then it sounds like the heater valve is not operating. Find the valve on the engine firewall passenger side and manually open the valve. Find it by following the 3/4 inch heater hose to the firewall where it is connected to the valve. Most likely the cable ( or vaccum hose)from the temperature dial to the valve needs replacing.

Dec 31, 2009 | 2008 Dodge Ram Pickup 1500

3 Answers

Where is the egr flow sensor on a 2005 dodge ram


I just took mine to the auto part store to find out. From what they told me its the little box on top of the Hemi Engine cover. They said I have to go to the dealer to get the part though.

Apr 10, 2009 | 2005 Dodge Ram 1500

1 Answer

The heater is blowing cold but the engine temperature reads high


Hi
I would first check to see if both heater hoses are hot to the heater.
if 1 is hot and 1 is cold the heater control valve is closed or the heater core is plugged.

Jan 14, 2009 | 2005 Dodge Ram 1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...