Question about 2001 Cadillac DeVille
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
4.6 Northstar V8. It is located on the rear of engine (driver side) in front. It is 1n the the waterpump housing cover. Remove airbox and intake tube and bottom radiator hose. 2 bolts(believe 10mm) on thermo housing. These systems are a lil finiky about air pockets....so fill slowly and let run at idle until operating temp and let cool and chk level.....fill as needed and repeat if needed.
Posted on Jul 06, 2009
First, provided their are no visible coolant leaks and/or loss of coolant with no signs of leaks, I would thoroughly flush cooling system and replace coolant, then check and/or replace thermostat (you can place thermostat in boiling water to check for proper function), if you have tried these 2 steps and still are experiencing overheating you may need to replace your water pump which can be a tricky job if you're unfamiliar and try to do it yourself, however, I could walk you through it if necessary. Also visually check your radiator hoses for bulges, wear ,etc along with heater hoses etc. You may want to also check radiator fins to see if they are dirty/obstructed and clean if necessary. Let me know if I can assist you further and how it works out
Posted on Aug 30, 2009
IF when you purchased your car you didn't set your own personal code you will have to take this to your local GM dealer and they can pull the code that is set at the factory and unlock your radio.THe proceedure for setting your own code then unlocking radio is in your owners manual.The dealership I worked for did this for free.
Posted on Aug 31, 2009
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls
Posted on Sep 23, 2009
Tips for a great answer:
Jan 14, 2016 | Cadillac Cars & Trucks
Sep 10, 2015 | 2003 Cadillac Deville
Apr 27, 2012 | 2001 Cadillac DeVille
Mar 27, 2012 | 1995 Cadillac DeVille
Jan 16, 2011 | 2001 Cadillac DeVille
Aug 31, 2010 | 2001 Cadillac DeVille
Apr 07, 2010 | 1994 Cadillac DeVille
Oct 13, 2009 | 2001 Cadillac DeVille
Sep 04, 2009 | 2001 Cadillac DeVille
Jul 06, 2009 | 2001 Cadillac DeVille
38 people viewed this question
Usually answered in minutes!