Question about Cars & Trucks

1 Answer

I have a 2000 Plymouth neon and have been having some issues. When you put the key in and then it to the ON position the lights, radio, and everything comes on inside the car. But the fuel pump is not turning on. And when you go to crank it over nothing happens. No clicks, nothing. We took it to a dealer to reset the security system and got new keys programmed but still nothing. Changed the ignition lock cylinder and ignition switch and nothing happened. I'm stumped.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 42,159 Answers

Dead batteries have enough power to turn on the lights you mentioned but under load (cranking ) there will be nothing. have a load test done on the battery to check for failing cell

Posted on Nov 17, 2013

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Key fob won't unlock or lock car VW Golf 2000

my mum had a similar problem and it turn out the code the key transmits to the engine had gone wrong she took it to a vw dealer and they reprogrammed the key. it works fine now and is a common problem. hope that helps

Posted on Sep 18, 2009

01fordeb
  • 1033 Answers

SOURCE: Are there any main fuses on a 2001 plymouth neon

Have you checked the starter solenoid. Your battery + cable connects to this then + cable runs from it to your starter. You also have an ignition switch wire connected to this. Just follow your cable from the battery and it will lead you right to the part. Some times these will break inside or the contacts go bad inside and therefore you will not get power to start the engine, but you will have power to turn on lights or whatever other accessories.The part is about $15

Posted on May 11, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My fuses light keep flasing on..n my radio doest work..does that mean i need a fuse for the radio?


There is no light to flash for any fuses. Is it the check engine light flashing you are refering to? The radio not working may be a fuse.

May 18, 2015 | Plymouth Cars & Trucks

1 Answer

2000 plymouth neon p1899


According to my source, code 1899 is a problem with the governor pressure sensor. But 4 digit codes are model specific, so you may be right about the selector switch.
If the switch tests out to be faulty, it would need to be replaced and the code erased.

May 04, 2013 | 2000 Plymouth Neon

1 Answer

HELP! My 2000 plymouth neon wont crank and no mechanic i bring it to can figure it out!!


If the headlights and dashboard lights are working but the vehicle still does not start, the ignition switch is most likely the problem. or a bad wire from switch. If your battery checks out, but the starter is still silent, it may be a faulty ignition switch. Turn the key to the on position (not all the way to start). If the red warning lights on your dash don't light up (and your battery connections are clean), the ignition switch is bad. If they do light up, turn the key to the start position. The dash warning lights should turn off at this key position (most cars). If you're not sure, turn on the headlights. When you try to start the car, the lights should either dim (a lot) or turn off completely. If they do, your ignition switch should be ok. If not, the switch will need replacement. check the wires to starter and see if you have power when car is switched on, do this first! good-day! if it cranks but does not start. check to see if spark and fuel, and check all fuses also.

Mar 21, 2012 | 2000 Plymouth Neon

1 Answer

Plymouth neon fuses for fog lights and gas gauges located


The fuse must be in the main fuse box. The position and function of the fuses is normally marked on the inside of the fuse box cover and also in the owner's handbook. If you don't come right with these, work your way through the fuses looking for a blown one.

Feb 25, 2011 | 2000 Plymouth Neon

1 Answer

The brake warning light will not go out on the instrument panel of our 2000 Plymouth Neon. We have replaced a rear wheel cylinder, the lines have been bled. The master cylinder has been checked. I am...


The issue will most likely NOT be dash wiring. Something is still tripped. Most likely is there is a switch that trips when one 1/2 of the brakes fail, like the rear wheel cylinder. Try bleeding brakes, again, including OTHER brakes than the ones that you repaired, allowing this switch to move in the other direction. Watch for the light to go out during this process.

Sep 16, 2010 | 2000 Plymouth Neon

2 Answers

How do you input the code in our radio of our chrysler neon


see here  for the Neon 2001 - 2008 

http://www.torbaycarstereo.co.uk/chrysler_p05091610ab.html

or if not try here

http://www.radio-code.co.uk/code-entry-help-Chrysler.htm



Sep 19, 2009 | 2000 Chrysler Grand Voyager

1 Answer

2000 neon check engine light is on


P1685 Skim Invalid Key.

The Sentry Key Immobilizer Module contains a Radio Frequency (RF) transceiver and a microprocessor. The SKIM transmits RF signals to, and receives RF signals from the Sentry Key transponder through a tuned antenna ring integral to the SKIM housing. When the ignition switch is turned to the On position, the SKIM transmits an RF signal to the transponder in the ignition key. The SKIM then waits for an RF signal response from the transponder. If the response received identifies the key as valid, the SKIM sends a valid key message to the PCM over the PCI data bus. If the response received identifies the key as invalid, or if no response is received from the key transponder, the SKIM sends an invalid key message to the PCM. The PCM will enable or disable engine operation based upon the status of the SKIM messages.

you can look it up here:
http://www.engine-light-help.com/check-engine-light-domestic.html

Sep 13, 2009 | 2001 Plymouth Neon

2 Answers

Door Lock doesn't unlock from outside


linkage is disconnected. most pannels pop off easy to allow acess. then pull the cover away from the position close to key point and see if linkage is loose.

Mar 11, 2009 | 2000 Plymouth Neon

1 Answer

Air bag light go on the radio single lights all do,not work


I have the same issue with my 1997 neon. I found that if I wiggle the key in the ignition it corrects itself.

Jan 09, 2009 | 2000 Dodge Neon

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

129 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...