Question about 2004 Chevrolet TrailBlazer

Open Question

How to change detent cable on trailblazer - 2004 Chevrolet TrailBlazer

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: detent cable

If it is kicking down too soon into passing gear you have to adjust it out, if you can floor it and it won't kick down then you have to tighten it. Could be a couple different ways, but probably on the bracket that holds it and the throttle cables is two nuts that can used to let it in or out. If is a stationary mount, they do sell after market kick down cables, or you can modify yout self. I've seen many old trucks with a cable that "stretched out". Bracket bent, or the spring gave out on the mount and the cable is now long, use a small nut, and bolt in the front of the cable hook up to make it shorter. Just use a lock washer if ou do this.

Posted on Apr 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2002 chevy trailblazer Ls. The tranny is slugish when i put it into drive, or start off from a stop. turn it off and put in park,then kicks down to 3 and will not allow the key to come out.


First the age of the blazer is most likely in need of a transmission filter change. While the tech. is at the filter have them check the detent function of the shift selector arm. It may just require a minor cable adjustment to keep from jumping out of Park, there is a safety hazard present, keep your foot on the brake pedal (turned the vehicle off) until you have removed the key. The trans. filter should be changed every 60,000 miles.

May 15, 2017 | Cars & Trucks

1 Answer

How to set a detent cable on a 1991 GMC sierra truck?


If its a 7004r push it all the way in and then move it 7 clicks out,,, they are very minor clicks so be sure,,, if you dont have it right you will burn up the trans in a few months

Jan 31, 2015 | 1991 GMC Sierra

1 Answer

Shift detent spring


Follow your accelerator cable to your engine. The detent cable hooks onto the same one

Nov 07, 2013 | 1998 Ford Mustang

1 Answer

2002 trailblazer will not shift into any gear out of park.


I had the same problem. these trailblazer are a pain. There is a cable that runs underneath the vehicle, and that is probably the problem. The cable is broke.

Jul 19, 2013 | 2002 Chevrolet TrailBlazer

1 Answer

I usually work on my car myself, and I was looking through my haynes book I have on my car, I wasn't able to see any directions on how to adjust the detent cable. I also did have a code that came up on my...


Most detent cables have a button on them that you press and pull towards the end of the cable . Then you hook it up and press the pedal to floor and it sets itself

Jan 14, 2011 | Pontiac Grand Am Cars & Trucks

1 Answer

Detent Cable Positioning ?


this should be done by a pro..the 700r4 is very touchy and the detent cable is your main pressure control..would advise you take to dealer for proper adjustment

Dec 15, 2009 | 1991 Chevrolet C1500

1 Answer

Detent cable positioning ?


3ac5bf5.jpgMy mistake,I forgot to post the attatchment.Let me know if this is what you were looking for.Take care .

Dec 15, 2009 | 1991 GMC Sierra

1 Answer

I took a motor out a car and put it in a truck now it want change gears


there are two cables to throttle body gas and detent for trans make sure detent moves in out freely when you pull out on it you should feel some spring tension if cable is stiff or broke on the tranny end wont shift let me know tell fix ya bout me ok

May 24, 2009 | 1998 Lincoln Continental

1 Answer

Detent cable


If it is kicking down too soon into passing gear you have to adjust it out, if you can floor it and it won't kick down then you have to tighten it. Could be a couple different ways, but probably on the bracket that holds it and the throttle cables is two nuts that can used to let it in or out. If is a stationary mount, they do sell after market kick down cables, or you can modify yout self. I've seen many old trucks with a cable that "stretched out". Bracket bent, or the spring gave out on the mount and the cable is now long, use a small nut, and bolt in the front of the cable hook up to make it shorter. Just use a lock washer if ou do this.

Oct 04, 2008 | 1987 Chevrolet R10

1 Answer

Transmission problem


have the detente cable checked

Aug 07, 2008 | 2002 Buick Century

Not finding what you are looking for?
2004 Chevrolet TrailBlazer Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...