Question about 2006 Ford F 350 Super Duty

Open Question

F350 code b1352 - 2006 Ford F 350 Super Duty

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is chime module located on 2005 ford taurus


There is no chime module ,there is a speaker inside the instrument cluster.
Door Ajar Chime
The door ajar chime feature is controlled by the smart junction box (SJB). The driver and passenger door ajar switches, and the liftgate are hardwired to the SJB. If any door or liftgate is sensed as being open, and the ignition switch is in RUN/START position, the SJB will process the input and sends a chime request to the instrument cluster over the controller area network (CAN).
Safety Belt Warning Chime
The safety belt chime feature is controlled by the restraints control module (RCM). The driver safety belt switch is hardwired to the RCM. The RCM communicates with the instrument cluster over a hardwire connection. If at any time during the first 6 seconds after the ignition switch is placed in RUN the driver safety belt is sensed as being unfastened, the RCM will process the input, and in turn, sends a chime request to the instrument cluster.
Have the vehicle checked for DTC'S - diagnostic trouble codes ,not OBD 2 codes , the check engine light has nothing to do with this .
Instrument Cluster Diagnostic Trouble Code (DTC) Index DTC Description Source Action B1342 Instrument Cluster is Defective Instrument Cluster INSTALL a new instrument cluster. REFER to Section 413-01 . B1352 Ignition Key-In Circuit Failure Instrument Cluster Go To Pinpoint Test B . B2477 Module Configuration Failure Instrument Cluster REFER to Section 413-01 .
For a complete list of instrument cluster DTCs, refer to Section 419-10 .


Smart Junction Box (SJB) Diagnostic Trouble Code (DTC) Index DTC Description Source Action B1342 SJB is Defective SJB INSTALL a new SJB. REFER to Section 419-10 . B1352 Ignition Key-In Circuit Failure SJB Go To Pinpoint Test B . B1577 Lamp Park Input Circuit Short to Battery SJB Go To Pinpoint Test E . C1167 Park Brake Actuator Assembly Switch Released Circuit Short to Ground SJB Go To Pinpoint Test F . Your best bet is to have a qualified repair shop diagnose this problem ,what ever it is .
Have the vehicle

May 28, 2016 | Ford Cars & Trucks

3 Answers

No give fire heve new coil and fuel pump


This code is for ABS and will have nothing to do with a no start condition. What size motor is in the vehicle? I need to know in order to offer assistance

Jul 14, 2015 | 2002 Mercury Cougar

1 Answer

2004 F350 P713 code


injection control pressure sensor (icp)

Dec 30, 2013 | 2004 Ford F350

1 Answer

Ranger won't crank.


accessory relay delay Coil Circuit Failure.There is a delay relay that is under the dash in the fuse panel.

Dec 03, 2013 | 1998 Ford Ranger SuperCab

1 Answer

B1352


Here's a link to your code.

Mar 11, 2013 | 1997 Lincoln Town Car

1 Answer

I'm looking for the keypad code on my 2004 F350. Any idea where i can find it?


the only way to get the code is to take it to a ford dealer and have them pull it out with the scan tool. most places will charge you a half hour.

Jan 15, 2011 | 2004 Ford F350

1 Answer

2003 ford f350 7.3 giving p1316 code what is this a wiring problem


This indicates that there are fault codes stored the the injector driver module that need retreived, this can only be done with a scanner capable of performing a injector electrical buzz test. This code is typically ocompanied by a rough running engine. Thankyou RJ

May 31, 2010 | 2003 Ford F350 Super Duty DRW SuperCab

1 Answer

I have a 2003 ford f350 with a code p1331 what


I ran this code through Google and it came up as a code for diesels. Is your truck a diesel?

Here is a website that should help you out. Please let me know if you need any further questions.

carsandcomps,

Guru, Premium Expert @ Fixya.com

http://www.thedieselstop.com/forums/f23/p1331-144660/

May 22, 2010 | 2004 Ford Super Duty F 550

1 Answer

F350 7.3 code po603 need to know how bad or way


P0603 Internal Control Module Keep Alive Memory (KAM) Error

Ford dealer Tech said to check for corrosion on the battery terminals, if
they’re good the check each battery individually to see if all cells are good.
If that still doesn’t solve it, he says to start pin testing the computer ????!!!??

P0603 doesn’t always mean you have a problem, if you are running any kind
of chip, programmer ,etc. you will get that code.

Jan 07, 2010 | 2001 Ford F350 Super Duty SuperCab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...