Question about 1998 Plymouth Voyager

Open Question

Camshap posistion sensor - 1998 Plymouth Voyager

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

IAT sensor i circuit high output


high RPMs is the sign of a bad idle air control valve. it is located on the thottle body next to the throttle posistion sensor

Dec 27, 2012 | 2006 Chrysler Pacifica

1 Answer

1993 s10 codes 21 22 45


if its a ob1 than 21 is throttle position sensor error to high 22 is throttle body posistion sensor to low and 45 is o2 sensor error to rich hope this helps

Jun 26, 2012 | 1993 Chevrolet S-10

1 Answer

2005 Ford explorere will not start cranks but will not turn over, have brought new battery evrything


There are a number of things that could be wrong 1rst make sure that you have fuel getting to the injectors turn the key to the on posistion and listen for the fuel pump engaging it will sound like a pump or small motor humming if you dont hear that then it means that your fuel pump is not running if this is the case check your fuses and the relay for the fuel pump they are marked in the fuse panel if the pump is running then i would make sure that i had spark make sure that the coil is firing if you have spark then i would try maybe changing my tps(throttle posistion sensor) or the crank sensor or the cam posistion sensor if you know someone with a scanner it would be nice to let them plug it in to read any codes that may be stored tis will help in not just randomly changing parts but this is to gove you an idea as where to start. hope this provides ypu with some insight.

Dec 18, 2010 | 2005 Ford Explorer

1 Answer

Car is hesitating have error code p1391 check engine light is on what does this code mean it is not in the book I just put a crank posistion sensor and that fixed it ,now it is doing it again only worse...


p1391 is intermitant loss of signal from crank sensor and cam sensor--change sensors!! change cam sensor first. good luck!! then try it, if still same way. change crank sensor.

Nov 26, 2010 | 2002 Chrysler Sebring

1 Answer

2001 cadillac Deville not starting


it can be several things ill give them all to you and you can do the process of illimination (1) crank sensor.(2)throttle posistion sensor.(3)cam posistion sensor.(4)bad coil.(5)bad fuel pump.and lastly bad timing. but first check to see if you have fuel if so check pressure off of the fuel rail or throttle body should be at a mimimun 14 psi if you have that then check spark you should have a strong spark if not then probably your timing is off but you will have to play with it to figure it uot. if you know someone with a scanner they can hook it up and probably get some codes that can lead you in the right durection.

Jun 18, 2010 | 2001 Cadillac DeVille

1 Answer

Crankshaft posistion sensor or ignition control module?


1) do you have a Check Engine Light On while running? If so find out what the code is
2) these engines are known for their CPS going bad...it can be tested on the car with a volt meter and turning the engine, but it isnt easy....I would have to err in the direction of changing the Crank Position Sensor.

Jan 11, 2010 | 1995 Buick Regal

1 Answer

Locate crankshaft position/crank angle sensor


The crank posistion sensor is located on the top of the transmission bell housing right next to the motor, its a @$^&^ to get to and do without a lift,

Jul 02, 2009 | 1995 Jeep Grand Cherokee

1 Answer

How change the cranfshaft sensor on honda accord 96 4 cilinder 2.2


It is attached to the engine oil pump houseing, one bolt I believe.

Oct 20, 2008 | 1995 Honda Accord

Not finding what you are looking for?
1998 Plymouth Voyager Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8732 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...