Question about 1995 Jaguar XJ6

1 Answer

P1775 is the on,y light on what should I do - 1995 Jaguar XJ6

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert that has over 500 points.

  • Jaguar Expert
  • 304 Answers

Need to check this:

1. Check the Engine Control Module (ECM) for water intrusion.

2. If OK, check the output of the crankshaft position sensor, it should be at least 1.0 volts AC.

3. Verify battery voltage (B+) is present at the injector and coil connectors with the key in the on position.
Tip: Water intrusion into the ECM is an issue with mid-90's Jaguars. The ECM is located at the passenger side kick panel and the connectors face up.

Posted on Nov 17, 2013


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Check engine light came on. Registered codes P1775 and P 0700 X2. What are these numbers and can I fix it myself?

Search Results

P1775 Transmission System MIL Fault - Repair Information for P1775 code. Learn what does P1775 Transmission System MIL Fault means?
Search Results What the P0700 code means. P0700 is set when the PCM detects a malfunction in the transmission control system. This malfunction causes the vehicle to set a Check Engine Light and trigger a failsafe mode. Once the failsafe mode is set it will remain until the fault is repaired or normal operation is detected.Apr 8, 2016

P0700 OBD-II Trouble Code: Transmission Control System ...

obd 11 fault codes Google Search

Jun 28, 2017 | Cars & Trucks


I get code P1775 and P0700


P1775 is the most relevant code. It means Solenoid valve latched in torque convertor.

P0700 is consequence of the P1775 code. P0700 means that there is an additional code stored in the TCM (transmission control module). The TCM stored code is probably related to the same problem. TCM codes can be pulled out at the car dealer or at an authorized garage. On this see: I get code p0700 after an OBDII scan.

P1775 is often coming with misfire codes.

P1775 means that the TCM detects that the solenoid valve located in the valve body (inside transmission pan under the filter) is not in the expected position (valve has two positions LR and TCC).
This cause rough shifting and driving problems.

Sometimes it is possible fixing the problem by resetting TCM and ECU. This is done disconneting battery cable (ensure you have anti-theft code if needed).

However, if a P1775 occurred, that means that there had been a solenoid valve malfunction, and problem must be fixed.

The first thing to do is replacing transmission fluid, and if needed also the filter. If the fluid level is poor, or if fluid is dark brown and satured with metal particles, that can cause solenoid valve malfunction.

If replacing the fluid does not help, then the most common problem causing the P1775 code is a defective solenoid in the solenoid pack.

Transmission shift solenoids are located in valve body, and they can be tested reading Ohms with a multimeter.

If that does not fix the problem (usually it does), the mechanic will proceed testing wiring to solenoid pack, TCM and solenoid valve, to find the reason of malfunction. Most common problems causing P1775 are related to tranny fluid and solenoid pack.

On automatic transmission problems see also: My car does not shift..


on Aug 17, 2010 | Chrysler Town and Country Cars & Trucks

1 Answer


Yes, that sounds like a plan

Jul 25, 2014 | 2010 Dodge Grand Caravan

1 Answer

Omd code P1775 came on

This is a transmission issue that is related to the transmission not being able to signal a problem.

Feb 13, 2014 | 2006 Mitsubishi Raider DuroCross

1 Answer

How do i fix a P1775 code on a 2004 Dodge Dakota

The P1775 means "Transmission System MIL Fault", I think you have known where is the problem. Good luck!
Benz AK500

Sep 11, 2012 | 2004 Dodge Dakota

1 Answer

I have a p1775 and p0700 code what do i need to do to fex this

The P1775 has to do with the solenoid switch valve in the valve body sticking.

Apr 05, 2012 | 2002 Dodge Caravan

2 Answers

200 Dodge Caravan 3.3L Engine. I am getting code P1775 & P1776. The car down shift and RPM goes up. The gear gets stuck on 2nd or 3rd shift. Check engine light comes on but after awhile it turns off. I...

r u using the rite fluid-chrysler calls for ATF 4 or u get problems-is the level correct--cars today use solenoids n electric governors to shift--pump may hav issue also--be careful with tran shops theyre the king of shade-Im wonderin if they really rebuilt it-investigate and maybe contact attorney general in ur state--here in fla itz an epedemic

Nov 03, 2010 | Dodge Caravan Cars & Trucks

1 Answer

I have 2 lights on..ABS and Check Engine. My

P1775, Transmission system silnoid

Oct 21, 2009 | 2001 Dodge Caravan

Not finding what you are looking for?
1995 Jaguar XJ6 Logo

127 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers


Level 3 Expert

76109 Answers


Level 2 Expert

489 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides